Untitled

[daswell-blog]

The Brief Introduction of Concrete Batching Plant

Concrete batching plant is used to concentrate on mixing concrete combination unit, also called concrete precast field. Because of its high degree of mechanization and automation, the productivity is high, and it can guarantee the quality of the concrete and save cement. It is often used in concrete of quantities, long time, site concentration of large and medium-sized water conservancy, electric power, Bridges and other projects. With the development of municipal construction, the concrete batching plantthat has the centralized stirring and provides a commodity has a lot of advantages, so it gets rapid development, and it promotes concrete pumping construction, realizing the mixing, transportation, casting mechanical joint operation to create conditions. The difference between mixing plant and mixing floor is: batching plant production capacity is small, structure easy dismantling, it can form a container transfer place, applicable.

Concrete batching plant is mainly composed of mixing console, material weighing system, material conveying system, material storage system and control system, and five major system and other ancillary facilities composition.

Concrete batching plant equipment has good environmental protection function. In machine process, powder control are all blocked in the system, powder tank adopts high efficiency dust collector/fog spray method, which greatly reduces the dust pollution to the environment, and, at the same time, concrete batching plant of pneumatic system exhaust and discharge equipment both adopt muffler device ,which effectively reduces the noise pollution.

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationship with new clients around the world in the near future.

Resource: http://www.concrete-batching-plants.org/concrete-batching-plants/

[daswell-blog]

Jaw crusher daily maintenance

First, the jaw crusher (jaw) lubrication 1, Before the jaw crusher started, the thrust plate and the thrust plate between the supports should be injected into the right amount of grease. 2, Notice the friction surface lubrication, and ensure the normal operation of the machine and prolong its service life. 3, The jaw crusher lubricating grease should be used according to the location, temperature dependent. 4, The jaw crusher machine joined the grease for around 51% of the bearing capacity, changing every 3~6 months. When changing the oil and application of clean gasoline or kerosene cleaning roller bearing raceway. In second, the jaw crusher (jaw) repair In order to ensure the normal operation of jaw crusher, in addition to operate correctly, planned repair is essential, which includes daily maintenance and inspection, maintenance, repair and overhaul. 1, Except for repair work, overhaul also includes the replacement of turning eccentric shaft and the mandrel, casting the babbitt metal of the upper part of the connecting rod head, replacement or repair a worn parts. Overhaul cycle is generally 5 years. 2, Repair including the replacement of the thrust plate, lining, check and repair of bearing. Repair cycle is generally 1~2 years. 3, The main contents include examination and repair minor repairs, adjustment device, adjustment of discharging gap, jaw crusher to the wear lining tune or replacement. Check the transmission part regularly. Repair cycle for 1~3 months. Our main products include engineering machinery, milling machinery and construction machinery and so on. Nowadays, we specialize in the following machines:mobile crushing plants,stone crushers,grinding mill,sand making machine,feeder and screen,stone crushing plant,rock crushing plant,gravel crusher,coal crusher,etc.

[daswell-blog]

The composition structure of Planetary Concrete Mixer

MP Series Planetary Concrete Mixersare manufactured using German technology. This kind of mixer not only applies to produce common commercial concrete and precast concrete but also have solved many problems about High Performance Concrete mixing.

MP Series Planetary Concrete Mixer's Gearing system

The power transmission is realized by a hard surface gearbox which is designed specially by our company (This technique has been patented). Fluid clutch is installed between the motor and the gearbox (This item is optional). The Fluid clutch can ensure the mixer startup smoothly and it can keep the mixer start up normally even in the full load condition.

The driving force provided by gearbox drives the mixing arms to do not only a revolution but also a rotation, and drives the scraping arms have a revolution. By this drive mode, the mixing action not only has a rotation but also has a revolution, the more complex of the motion track, the more turbulent the mixing is, and then the mixer works more effectively, its mixing more homogeneous.

MP Series Planetary Concrete Mixer's Discharging device

According to different demands of customers, the discharging door can be opened by hydraulic, pneumatic. The number of the discharging door is three at most. And there is special sealing device on the discharging door to ensure the sealing reliable.

MP Series Planetary Concrete Mixer's Mixing device

Driven by the fearing system, the blades fixed on mixing arms and the scrapers on scraping arms crush and overturn the material to complete the compelling mixing.

MP Series Planetary Concrete Mixer's The hydraulic power unit

A special designed hydraulic power unit is used to provide power for more than one discharging gates. On emergency, these discharging gates can be opened by hand.

Resource: http://www.dwmixers.com/products/planetary-concrete-mixers/

[daswell-blog]

Diesel engine crusher for sale from china

Diesel engine crusher is principally utilized in an area that do not have adequate electricity or without electricity. They are able to perform the middle or fine crushing for each type of rocks and stones. The diesel engine crusher is within compact structure, easy usage and operation. We can also do portable (mobile) ones as clients'request.

Features of Diesel engine crusher

1．No need electricity, only need diesel and driven by the diesel engine.

2. Easy transporting and easy operating

3. suitable to any kinds of stone, ores and minerals

4. new designed by Daswell.

Other diesel engine crusher

Diesel engine impact crusher is a new product which absorbs high-tech at home and abroad. Percussion crusher is suitable for the materials of the compressive strength is 300Mpa,and the size of the particles is in the company of 500 mm impact crusher. The characteristics of easy maintenance, high report crushing and grinding etc efficiency with finished products in cubic form, percussion crushers are the ideal crusher for aggregates of processing in the construction of high-type highways, water conservation and the construction of power plants.

DASWELL can be considered as one of Diesel engine crusher(Diesel engine jaw crusher and Diesel engine stone hammer crusher) Manufacturers and Exporters in the global market. Using superior quality components, we have developed Diesel Engine Crusher that offers consistent performance without any wear and tear. Moreover, we provide durable Diesel Engine Crusher at the reasonable price. 

[daswell-blog]

The Scope of Application and Structural Features of Vibrating Feeder

Vibrating feeder applies to the feeding system of industries such as metallurgy, coal. It works by making materials in the hopper discharge on the belt conveyor smoothly so that forms material layer with suitable thickness and width. And vibrating feeder can deal with materials like coal, mine, sand, dinas, and chemical particles and so on.

  Vibrating feeder has the following characteristics:

1. It can control the discharging capacity easily. By the feeder’s controller or the whole equipment’s electric controlling system, vibrating feeder can change the discharging capacity by frequency conversion.

2. Wide range of applicable materials: it can deliver materials with different forms. For instance: powder, granule, bulk etc.

3. The maintenance cost is low. Because of resonance, vibrating feeder has the features of low power consumption and little abrasion.

4. Applied in special working conditions: vibrating feeder can add dustproof cover, scaleboard, sealing element, water-cooling jacket according to different conditions.

5. Smooth vibration and reliable working performance.

6. Special grid design can prevent the blockage of materials.

7. Adjustable grid gap.

8. There are many wear-resistant parts.

9. Installation of variable-frequency motor to adjust frequency and thus to change production. It’s convenient to control the feeding capacity and there is no need to turn on the motor too frequently.

DASWELL is a high-tech enterprise, which is specializing in the research, development, and manufacture of industrial stone crushing & screening equipment, grinding mills, mining equipment and so on. So far, we have established a whole production chain, of which main products cover stone crushing & screening equipment: jaw crusher, cone crusher, diesel engine crusher, impact crusher, vertical impact crusher, hammer crusher, vibrating feeder.

[daswell-blog]

Installation and test run of concrete batching plant

How to installation and test run of concrete batching plant?

1. The installation site should be flattening and grounded. The open mouth of the site should be higher than the ground in order to avoid water flowing into the pit.

2. Lift the mixer with elevator, install 4 ground jack to connect angle iron, inclined strut and crawling ladder, and install the up and down railroad, put it rightly in the pit. Pay attention to keep them in the same level when installing. Railroad frame should not skew and misplace. The user should fix the base according to practical situation.

3. Weather protection and transportation channels should take into consideration when installing power, water supply and material place.

DASWELL machinery specializes in manufacturing concrete batching plant,concrete mixer, etc.

DASWELL main products are as follows:

Concrete mixer: portable concrete mixer,foam concrete mixer,twin shaft concrete mixer,mobile concrete mixer,sicoma twin shaft concrete mixer,reversing drum concrete mixer,small concrete mixer,mini concrete mixer,concrete pan mixer,diesel concrete mixer,forced type concrete mixers,JS series concrete mixer,MP planetary concrete mixer,sicoma planetary concrete mixer etc.

Concrete batching plant: stationary concrete batching plant,portable concrete batching plant,small concrete batching plant,mobile concrete batching plant,ready-mixed concrete mixing plant,belt type concrete batching plant,commercial concrete mixing plant,continuous concrete batching plant etc.

HZS Concrete batching plant (HZS25 / HZS35 / HZS50 / HZS60 / HZS90 / HZS120 / HZS180).

JS series twin shaft concrete mixer: (JS500 / JS750 / S1000 / JS1500 / JS2000 / JS3000 / JS4000).

MP series planetary concrete mixer:(MP500 / MP750 / MP1000 / MP1500 / MP2000 / MP2500 / MP3000).

Small concrete mixers (JZC350 / JZM350 / JZC500 / JZM500 / JZC750 / JZM750).

[daswell-blog]

JZR500 Reversing drum concrete mixer

Heavy duty channel chassis provides durability and stronger support in the areas where you need it.

Four jack legs give maximum stability throughout the mixing cycle.

Towable chassis with two pneumatic tyred wheels. Mechanically operated feed hopper.

Power source: diesel engine.

The drum rotates in one direction for mixing and in the opposite direction for discharging the concrete. There are two types of blades attached to the inner walls of the drum. One set drags the concrete upwards and toward the center of the mixer when the drum rotates in one direction; the second set of blades pushes the concrete toward the opening when the drum rotates in the other direction. The blades have a spiral arrangement to obtain the desired effect for discharging and mixing.

Use of JZR500 reversing drum concrete mixer

The reversing drum concrete mixer is of middle capacity, self-falling type. It is suitable for mixing plastic and low-slump concrete. The aggregate size is required to be smaller than 60 mm.

The drum revolves for mixing and reverses for discharging. The rated output capacity of this mixer is 0.50 cubic meter.

Features of JZR500 reversing drum concrete mixer

1)JZR500 reversing drum concrete mixer adds a water pump for water circulation between water tank of the engine and the radiator; keeps the engine water temperature to be stable.

2)Removing the air sucking point from the back to the front, reduce to suck the dust. It will be good to prolong the service life of the engine.

It has the advantages of compact structure, higher reliability, mixing evenly, big capacity, easy operation, easily movable between sites, etc. The reversing drum concrete mixer is widely used in building site, road and bridge project, and many other construction sites.

Resource: http://www.dwmixers.com/products/concrete-mixer/reversing-drum-concrete-mixer.html

[daswell-blog]

Mobile Diesel Concrete Mixer

Introduction

DASWELL JZR series diesel concrete mixers are mobile type, very convenient to move anywhere. The drum rotates in one direction for mixing and in the opposite direction for discharging the concrete. This series diesel concrete mixer has 350L and 500L output capacity. The aggregate size is required to be smaller than 60 mm.

Principle

There are two types of blades attached to the inner walls of the drum. One set drags the concrete upwards and toward the center of the mixer when the drum rotates in one direction; the second set of blades pushes the concrete toward the opening when the drum rotates in the other direction. The blades have a spiral arrangement to obtain the desired effect for discharging and mixing.

Application

DASWELL JZR series diesel concrete mixers are suitable for mixing plastic and low-slump concrete. It is widely used in roads, bridges, water projects or other industrial and civil projects, specially most popular in tight-electricity countries.

Features

1. Power source: diesel engine, no demands to electricity.

2. Easily movable between sites.

3. Compact structure, higher reliability, mixing evenly.

4. Adding a water pump for water circulation between water tank and water radiator, keep the water temperature to be stable.

5. Removing the air sucking point from the back to the front, reduce to suck the dust. It will be good to prolong the service life of the engine.

Resource: http://www.dwmixers.com/products/concrete-mixer/diesel-concrete-mixer.html

[daswell-blog]

Aggregate dosing machine prohibit open electromagnetic valve

Aggregate dosing machine prohibit open electromagnetic valve when not working, bucket elevator institutions due to leaving the brake air gap increases brake lining wear, brake pull the sound will be larger, serious phenomenon will produce brake can’t pull, causing the motor burned, and therefore must regularly test the brake air gap and check the brake torque. When the braking air gap greater than 6 mm should loosen the nut 1 nut 2, adjust the brake coil, concrete batching machine to ensure that the entire circumference of the brake air gap in the range of 0.1 ~ 0.2 mm, and then tighten nut 1 and nut can. Braking torque adjustment nut loosen and tighten the nut 4 compression brake spring to increase the braking torque. Loosen the nut, relax the brake spring braking torque. The braking torque can’t be adjusted too much, otherwise it will causes the brakes not open. Braking torque adjustment is completed, tighten the nut 3 can. Regardless of braking torque transfer large or transfer small adjustment shall make three brake spring compression heights consistent,aggregate dosing machine in order to avoid uneven braking piece due to power damage. Should always check the wire rope a chuck fixed and wear situation, When wire rope every pitch wire breaking number of more than 5% of the total root root, should be replaced for maintenance and overhaul should be hopper raised to the top dead center, with a track on the safety pin lock. Mixing station to run the first week of the lifting mechanism should be checked daily limit connection bolts loose. Before each formal operation manual lifting and landing enhance the bucket, concrete paving machine to determine whether the limit switch flexible and reliable. The second limit switch should be checked once a day is flexible and reliable, checked weekly limit switch reliability. In the first week of the concrete batching plant using powder positions the basis of whether the settlement must be tested daily. Powder before filling the positions for the first time, it must be the silo residual debris clean up. Filling the powder or maintenance to replace the discharge gate to the warehouse for the first time, you must check the seal of the gate. The cement silo gas arch breaker should be checked regularly to ensure it is in a normal state. Powder positions in the screw conveyor is not working during concrete batching machine prohibit open the broken arch electromagnetic valve, to avoid compressed air into the silo.

[daswell-blog]

Solutions to some common problems of the jaw crusher

People may meet various problems during the operation of jaw crusher, so the following illustrates some solutions to those common problems.

Fault phenomenon 1):

Host sheave and movable jaw can work normally, but it cannot proceed the crushing task. Reasons: 1) stretched spring cracked  2) the pull rod cracked 3) the toggle plate fell off or cracked Solutions:

1)change the stretched spring 2)change the pull rod 3)reinstall or change the toggle plate

Fault phenomenon 2):

the output can’t reach to the ex-factory standard. Reasons:

1)the materials’ hardness or tenacity to be crushed is higher than which is regulated in the directions. 1) the discharging port is smaller than the specified limit. 2) the jaw plate dislocates so that the jaw crest is against to the jaw crest. 4)the voltage on the workplace is too low.  5)after abrading, the gap between the movable jaw and the bearing is too  excessive leading to the outer circle of the bearing’s roll relatively. Solutions:

1)replace or add a crusher  2)readjust the discharging port to the specified limit and add a crusher used for fine crushing. 3)examine the pitch size of the jaw plate and replace the jaw plate if it doesn’t confirm to the standard. 4) turn up the voltage on the workplace to make it suits the requirements of the motor load. 5) replace the bearing or the movable jaw.

Fault phenomenon 3):

 the toggle plate cracked. Reasons:

1) the motor is overload or the material larger than that of the feeding port entered. 2) some materials that can’t be crushed enter the crushing cavity. 3) The toggle and the pad is unparallel, and there is deviation between. 4) Th castings have serious flaws.   Solutions:

1) replace the toggle plate and control the feeding granularity to prevent the motor’s overload. 2) replace the toggle plate and take measures to prevent non-crushing materials to enter the crushing cavity. 3) alter the toggle plate and the abraded pad and install the toggle plate correctly. 4) replace the qualified toggle plate.

Fault phenomenon 4):

eccentric shaft bended or cracked. Reasons: 1) in the lifting process, the mainframe turned to the side and made the eccentric shaft bended because of the stress on one side. 2)  the materials’ hardness or tenacity to be crushed is more than which is regulated in the direction. 3) the mainframe works with overload for a long time. 4) the toggle plate can’t achieve to the standard so the non-crushing material will self-crush when entering the crushing cavity. 5) the improper heat treatment and the concentrating stress lead to the crack of the eccentric shaft.   Solutions: 1) change a new eccentric shaft and lift the mainframe in the right way. 2) replace a new eccentric shaft, and select suitable crusher according to the compression strength of materials. 3) replace a new eccentric shaft and adjust the work load or change to an adaptive crusher. 4) replace a new eccentric shaft and not use the toggle plate and pad which are not compatible with design standards. 5)replace a new eccentric shaft and use the eccentric shaft with qualified heat treatment.

Resource: http://www.dwcrusher.com/products/stone-crushers/jaw-crusher.html

[daswell-blog]

JS series twin-shaft concrete mixer

DASWELL JS series twin-shaft concrete mixer is a compulsory concrete mixer, with the advantages of turbulent mixing, high efficiency, compact structure, humanized layout, convenient to operate and maintain.

It is very popular at home and abroad, not only it can work independently, but also it can work with PLD series aggregate batcher to make a simple concrete plant or is adopted as the mixer in the high-end concrete batching plant.

Application

DASWELL twin shaft concrete mixer is widely used in ready-mix and precast concrete industries; Suitable for all kinds of big, medium and small precast concrete plant; widely applied in roads, bridges, water projects or other industrial and civil projects.

Features

1. Motor: Siemens motor, which can provide steady performance.

2. Synchronizer: Original imported from Italy, ensure synchronous running of mixing arms.

3. Wearable Mixing Device. Adopt high-rigidity and high-tenacity cast alloy steel, which has the best torsion-bent strength, so it prolongs the service time.

4. Two Heavy Duty Gear Box. They are specially customerized for the mixer. All of the shock brought by quick loading or restarting can be easily and safely buffered and absorbed.

5. Electric Lubrication System. It supplies oil to four shaft heads respectively with four pump cores, without by-pass valve, so that it avoids blocking in by-pass valve, furthermore, it reduces the maintenance load.

[daswell-blog]

Diesel engine crusher manufacturer

  Diesel engine crusher is principally utilized in an area that do not have adequate electricity or without electricity. They are able to perform the middle or fine crushing for each type of rocks and stones. The diesel engine crusher is within compact structure, easy usage and operation. We can also do portable (mobile) ones as clients'request.

  Features of Diesel engine crusher:

1．No need electricity, only need diesel and driven by the diesel engine.

2. Easy transporting and easy operating

3. suitable to any kinds of stone, ores and minerals

4. new designed by Daswell.

Other Diesel Engine Crusher

Diesel Engine Impact Crusher is a new product which absorbs high-tech at home and abroad. Percussion crusher is suitable for the materials of the compressive strength is 300Mpa, and the size of the particles is in the company of 500 mm impact crusher. The characteristics of easy maintenance, high report crushing and grinding etc efficiency with finished products in cubic form, percussion crushers are the ideal crusher for aggregates of processing in the construction of high-type highways, water conservation and the construction of power plants.

DASWELL can be considered as one of Diesel Engine Crusher Manufacturers and Exporters in the global market. Using superior quality components, we have developed diesel engine crusher that offers consistent performance without any wear and tear. Moreover, we provide durable diesel engine crusher at the reasonable price.

Resource: http://www.dwcrusher.com/products/stone-crushers/diesel-engine-crusher.html 

[daswell-blog]

JS3500 concrete mixer

Auto-lubrication system ensures the mixing system can operate continually for a long time.

Features of JS3500 Concrete Mixers:

1.This concrete mixer uses high-chromium and high-molybdenum scale boards and stirring pieces, with a long service time.

2. Shaft seal is applied with patented air pressure seal, which can effectively prevent the leakage of mortars.

3. Auto-lubrication system ensures the mixing system can operate continually for a long time.

4. Opening gates mechanism directed by hydraulic can adjust the opening angle of discharging door in accordance with the need, which effectively prevents overspill while discharging the finished materials into truck-mounted concrete mixers.

Application of JS3500 Concrete Mixers:

This js3500 concrete mixer is ideal for mixing stiff-consistency concrete, semi-stiff-consistency concrete, plastic concrete and other kinds of concrete in different proportional ratios.

Technical Specification of JS3500 Concrete Mixers:

Model: JS3500

Discharge volume: 3500L

Charging volume: 5600L

Theoretical capacity: ≥180m3

Aggregate sizes: ≤60/80mm

Working circle: 60s

Mixing blade

Speed: 21.85r/min

Quantity: 2×11

Mixing motor

Model: Y280M-6

Power: 2×55 kw

Weight: 12000kg

Dimensions (L x W x H): 4300x2680x1910 mm

[daswell-blog]

XS series wheel sand washing machine

Wheel sand washing machine

Brief introduction

The sand washing machine of XS series is a kind of cleaning equipment of international advanced level for sand and slag pellets, it is developed on the basis of introducing foreign outstanding technology of the same kind of products.

Wheel sand washing machine is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water conservation and hydropower, cement mixture station and so on.

Features of wheel sand washing machine

-Little loss for medium-sized or fine sand and stone power

-No other easily-damaged parts except the screen mesh

-Much lower breakdown rate

-Longer working life and lower maintenance frequency

Application of wheel sand washing machine:

Sand washing machine is widely used for cleaning materials in the following industries, qurry, construction, water conservation and hydropower, cement mixture station and so on.The machine has become customers' preferred device in the sand industry

Types of wheel sand washing machine:

1). What's the material you are going to deal with?

2). What's the granularity of the material?

3). What's the granularity of the final products are you going to achieve?

4). What's the producing capacity you are going to achieve?

Our engineers will suggest you the most suitable one for you according to your information.

[daswell-blog]

JS1000 concrete mixer

JS1000 concrete mixer is dual horizontal shaft concrete mixer, which can can work independently, also can be composed the concrete mixing plant with other matched equipment., and it can be Applicable to large, medium and small precast concrete products factory and roads, railways, bridges, water conservancy, civil construction project,and it can mix dry and hard concrete, plastic concrete, light aggregate concrete and all kind of mortar, it is one kind of high efficiency, widely used construction machinery. It owns reasonable design ,and its mechanical accessories used industry standard parts, and its maintenance is much convenient.

Features:

This machine also is twin shaft compulsory concrete mixer,which can mix subarid rigid concrete, plasticity concrete, flowability concrete, light aggregate concrete and various mortar. Drum sets with high manganese cast steel liner and mixing blade, which is durable and easy to replace. Once it is combined with various models of batching machine,concrete batching plant will come into being, which applies to various kinds of large & medimum scale prefabricated factories and all kinds of construction sites, roads, bridges, airports, tunnels and other projects.

Application:

It can mix subarid rigid concrete, plastivity concrete, flowability concrete, light aggregate concrete and various mortar.

This machine is designed reasonable, compact structure, easy to operate and work stably, and it also has many advantages such as good mixing quality, high productivity, low energy consumption, low noise and long life of wearing parts.

[daswell-blog]

WHAT MAKES YOU FEEL BETTER WHEN YOU ARE IN A BAD MOOD?

Looking back at the happy things

[daswell-blog]

Small concrete batching plants

HZS small concrete batching plants include HZS25 (25m3/h), HZS35 (35m3/h), HZS50 (50m3/h), etc. As these small models of concrete batching plants feed the aggregates by skip hopper, people also like to vividly call them skip type concrete mixer.

Small concrete batching plant which is professional equipment for ready mix concrete production.They can produce plasticity/dry-hard concrete with high productivity, and they are widely used in small and medium construction products, road, bridge project, and concrete prefabrication factory.

Main parts of HZS small concrete batching plants:

1. Mixing system: adopt JS series Twin-shaft Concrete Mixer for high quality of mixing effect, long service life of spare parts and easy maintenance;

2. Cement system: adopt separated cement silo and screw conveyor for cement storage and feeding, bulk cement pump can be provided based on customers requirement;

3. Weighing and control system: adopt new-design of electrical weighing system, can work with computer, SIEMENS PLC, digital display, etc, which will make sure the measurement accurate and timely;

4. Air system: adopt high quality of air compressor, air pipe and air cylinder, easy installation and maintenance;

5. Aggregate feeding system: adopt Bucket (Skip Hopper), also be equipped ladder for worker maintenance or service;

6. Aggregate batcher: adopt PLD series of automatically weighing and discharging machine, reliable quality and long service life.

Key Specifications/Special Features:

• Good reliability, low failure rate, high efficiency and reasonable prices

• Rubber wheel drive is low noise and low failure rate

• Uses industrial computer and imported electronic weighing machine for high measuring accuracy

• Cement bin is equipped with arch breaking device and level gauge to ensure smooth cement conveying

• The cement pusher and cement bin are connected by spherical joint for easy installation

• Cement agglomeration is avoided

• According to customers' requirements, a horizontal feeder can be equipped to deliver sacked cement or coal ash

• The concrete batch plant accommodates aggregates of various sizes, and is widely used to form roller compacted cement for small water conservancy project

Application:

HZS series small concrete batching plants are widely used to produce various kinds of concrete including quaking concrete and hard concrete,suitable for large or medium scale building works, road and bridge works and precast concrete plants, etc. It is an ideal equipment to produce commercial concrete.

Resource: http://www.concrete-batching-plants.org/concrete-batching-plants/small-concrete-batching-plants.html