No title available
AnasAbdin
★
todays bird
d e v o n
Claire Keane
⁂
RMH
Misplaced Lens Cap
🪼
DEAR READER
h
Sweet Seals For You, Always
No title available
Sade Olutola
#extradirty
$LAYYYTER
YOU ARE THE REASON
No title available
pixel skylines
seen from Türkiye
seen from United States
seen from United States
seen from United States
seen from Türkiye
seen from United States
seen from South Africa
seen from South Africa
seen from Russia
seen from Brazil
seen from Tunisia
seen from United States
seen from United States
seen from Germany
seen from United States
seen from Canada
seen from United States
seen from United States
seen from United States
seen from United States
@dynamerican
Root intrusion is probably the most common of the sewer line problems faced by households. Know how it work & why sewer maintenance crew recommend RootX.
Root intrusion is probably the most common of the sewer line problems faced by households. Know how it work & why sewer maintenance crew recommend RootX.
The type of heating system you choose will have a great impact on your home’s energy consumption & monthly utility bills. Here are certain things to consider.
Benefits of Trenchless Sewer Repair Technology
Damaged sewer lines are among the commonplace issue faced by homeowners and call for immediate action. If ignored or left unrepaired, the repairs become more and more difficult. When a damaged pipe system finally blows up causing a major havoc, you might be left to think that the only option left is to go for massive excavations. However, for the past 15 years, with the emergence of trenchless sewer repair mechanism, the scenario of pipe repairs and replacements has dramatically changed. Trenchless services are an ultimate solution to new drain installations, clearing clogs, or replacing and repairing of sewer lines.
PROS
Enhanced Quality: Plumbers use state-of-the-art equipment to repair broken sewer pipes while replacing them with durable pipe system that will not corrode, crack or rust.
Cost effective: When compared to the traditional methods, lining sewer pipes save up to 75% to the residential and commercial properties. This method involves less hours and thus reduces the cost of labor needed to complete the task.
Eco-friendly: In the long run, the trenchless sewer repair technology will bring in huge savings while protecting the earth’s resources.
No-dig technology: No extensive excavation is needed with the innovative process of trenchless pipe rehabilitation.
Durable pipes installed: Professional plumbers will install pipes that are lined with epoxy resin. These can last up to 50 years. Thus, this is a non-invasive method of sewer repair and the preferably the wisest investment.
Versatility: When using the trenchless sewer repair mechanism, the traditional materials such as concrete, clay, cast iron are not used and so homeowners do not need to worry about any damages in future.
The Maxliner System is a kind of trenchless sewer repair technology that relines lateral pipelines without disruptive digging. We, the Dynamerican team are certified Maxliner installers. Our Maxliner products allow us to view the pipe defects with the help of a video camera to monitor your system internally as well as externally. for more details. You can also contact our technician at 800-362-8490. http://www.godynamerican.com/contact-us to discuss further.
Source: http://www.godynamerican.com/blog/benefits-of-trenchless-sewer-repair-technology/
How Does a Video Sewer Line Inspection Take Place?
Sewer lines are the last things on your mind, isn’t it? Obviously no one would ever think about them unless they get blocked and a panic situation arises. So, a better idea is to have your sewer lines inspected by a professional plumbing professional service provider to detect any problems early before becoming an expensive repair. A proper inspection of the sewer line usually includes a special camera that inspects through the line and gives the plumber a good idea of the line’s condition and helps locate the clogs.
How is the video inspection done?
Video inspection of sewers usually involves a camera and an operator that displays the state of the inner walls of the sewers for a treatment action on the specific area. The following are some of the types of machines used for video inspection of sewer lines:
PUSH CAMERAS
Push cameras are the simplest form of video inspection and are widely used by many of the plumbing professionals. It includes a long cord with a push cam on one end which enters the pipe that needs to be inspected and sends live images to the plumber feeding the cord into the system. The camera is pulled back after the inspection is completed. This method works fine when the user knows which of the pipes has a problem.
LATERAL LAUNCH CAMERAS
Sewer problems can develop not only in the mainline pipe, but can affect the branching lines too. The lateral launch systems inspect the pipelines by adjusting and launching a secondary camera for an inner reach.
CRAWLERS
During video inspection with crawlers, a camera tractor with an attached flexible cable at its back runs through the sewer pipelines. The camera enters from an access pipe which then flows down the sewer through a manhole. The technician places the service truck right above the suspected pipe so that he can control the speed and movement of the camera to have a clearer view. Followed by this, the operator sets up the down-hole roller that in turn prevents the cable from causing any further damage to the top of the pipeline by rubbing. Once the set-up is done, the operator proceeds with further investigation by operating the camera tractor remotely from the service tractor. After completion of the process, the camera is removed by reversing the cable and gear.
A camera inspection can help detect blockages and corrosion and by having this inspection done before the occurrence of any problem saves you both time and money.
A sewer block can erupt at any time and be disastrously embarrassing. One of the best methods of preventing damage to your sewer line is to avoid washing down things like wet wipes, caustic liquids or grease down the drain. In spite of taking these preventive measures, experts suggest home owners to hire professional plumbing services and let them inspect the sewer lines at regular intervals to help detect potential issues.
Dynamerican offers exceptionally professional plumbing and drain services in North East Ohio. The team provides sewer and drain cleaning, video line inspections (esp. push cameras), high-pressure sewer jetting, grease trap installation, and back flow testing services. Contact our team now at 800-362-8490 or visit http://www.godynamerican.com/contact-us
Source: http://www.godynamerican.com/blog/how-does-a-video-sewer-line-inspection-take-place/
Make Your Home Energy Efficient Through Plumbing Fixtures
Loads of laundry, watering plants, or just having some fun at your home’s backyard – all of these tend to raise your water bills to unexpected numbers. While a simple solution would be to use less water, it does not always happen. Here is where you need the assistance of professional, high-efficiency plumbing fixtures. The Fixture of using less water than the standard usage while not compromising on performance - is well known to the professional plumbing servicemen.
Slight remodeling of your home’s plumbing systems would help you save on your water bills:
SHOWERHEADS
A refreshing shower can last longer than the normal time required, and why not? Everyone loves a nice hot shower. However showering accounts for almost 20% of the indoor water usage of a household. Professional plumbing services have alternative, high efficient showerhead solutions that would cut down the water use in showers to up to 70%. These showerheads use less than 2 gallons per minute which is quite a less amount than the traditional inefficient showerheads. The water pressure is less but sufficient to give you a strong steam.
TOILETS Nearly 30% of the water used in homes comes from toilet usage. If your toilets were installed sometime before 1994, professional plumbers would recommend you to switch to high-efficiency toilet models that use no more than 1.28 gallons per flush. Another better alternative is to use a dual flush model that pile up savings immediately.
FAUCETS People often forget to turn off the taps while brushing the teeth or doing the dishes. The good news here is that you can even save a lot while the tap is on with the help of high-efficient bathroom and kitchen faucets that consume maximum of 1.5 gpm which accounts for 30% lower use than the standard flow of 2.2 gpm. This can result in a saving of up to 700 gallons of water a year.
High-efficient plumbing services ensure that you save a considerable amount on your water bills. The Dynamerican team comprises of professional plumbers who offer professional plumbing services in Ohio since 1957. We have well trained technicians to install all types of plumbing equipment including sinks, bathtubs, toilets, hot water heaters, and pipe work. In case you wish to save energy consumption and utility bills, please contact 800-362-8490 or http://www.godynamerican.com/contact-us
Source: http://www.godynamerican.com/blog/make-your-home-energy-efficient-through-plumbing-fixtures/
Smart HVAC, Smart Home - DIY HVAC Maintenance Checklist
Some things must be really done ON TIME, EVERY TIME; whereas other things can be done once a year or seasonally. A healthy HVAC system means less maintenance and repair costs. A well-maintained HVAC system not only saves you money and energy, it also expands the lifespan of the device ensuring its highest efficiency. Your Heating, Venting, and Air Conditioning system has an interior unit consisting of a blower and an evaporator along with an exterior unit consisting of a compressor and a condenser. Below are a few steps that would save your equipment from unwanted problems and early replacement.
A routine maintenance check-up procedure should include the following:
Checking Thermostat Settings – Check the HVAC’s thermostat settings to ensure that the system does its job well. For this, you will have to switch from cooling to heating and raise the temperature slightly above the room temperature. If no heat kick sound is heard, make sure all the wire connections are secure or check the furnace fan, heat pump or blower. But contacting a professional would be a better option.
Lubricate the Moving Parts – An optimally working HVAC must serve energy savings. However, parts that lack lubrication result in friction and may cause maximum energy consumption. To lubricate, turn off the power and clean the caps after opening the cover. You can then lubricate the bearings by removing the caps.
Check and Clean the Heat Exchanger – A dirty burner or faulty (cracked) heat exchanger may cause carbon monoxide leakage and lead to disasters in the home. Also, an improper gas or oil connection can contribute to health related problems.
Inspect the Condensation Drain – It is important to constantly monitor the condensation drain of your heat pumps or furnaces as a plugged drain can affect humidity levels.
Check the Refrigeration Levels – Too little or too much refrigerant reduces efficiency in turn increasing energy costs. This may also reduce the life of the equipment.
Verify the Control of the Systems – This ensures safe operation. Check whether the system starts, operates, and shuts down properly.
Remove Debris and Free Up Surroundings – Cut off the plants that cover the condenser and remove the fan cage to clean the interior of any debris from the interior. Cut out the vegetation to up to 2 feet in all directions to allow generous airflow around the unit.
Performing these basic checks will enhance the HVAC system utility and extract most out of the equipment. Your plumbing services contractor can assist you through the process while you follow these DIY steps to maintain the HVAC at its optimal operational levels and increase the life of the equipment. Dynamerican has been in the industry since 1957 and understands the technicalities. With our well-trained staff members, we assure hassle-free functioning of your HVAC system. For any further assistance, please contact 800-362-8490 or visit http://www.godynamerican.com/contact-us.
Source: http://www.godynamerican.com/blog/smart-hvac-smart-home-diy-hvac-maintenance-checklist/
Should You Replace or Repair Your HVAC System?
Do you think you are paying more than you think you should in energy bills? Whether it is a Yes or No, if your HVAC system is 10 year old, it is definitely time to perform a check and decide thereupon if it needs to be changed. Records show that nearly 40% of a home’s energy bills comprise of the energy consumed by the Heating, Ventilation and Air Conditioning (HVAC) Systems. Replacing or repairing the HVAC could help you save thousands of dollars in the long run and serve you better in the heating and cooling of your home.
However, it is always suggestible to conduct a survey of your HVAC system for possibly costly leaks before spending thousands of dollars on purchasing a new heating and cooling system. This inspection would probably get you to the root of the problem which may be a lot less expensive to treat than to invest in buying a new one.
It is great to start with an overall energy assessment of your home by an energy efficiency professional – just a walk-through or a comprehensive audit with the help of a blower-door test that detects energy leaks by checking the pressure in the house. A check can also be performed for the electric utilities insulation. Thus, once you are sure that the insulation and seals of your house are efficient, you may get a clearer picture of whether you need to replace the entire system or just have a few repairs. Even though you decide to purchase, the energy assessment will help size your new HVAC system properly and run more efficiently, consequently saving your upfront costs and hiked energy bills in the future.
Hire Professional HVAC Maintenance Services
As heating and cooling systems are responsible for your home’s safety and health, it is always better to rely on professionally trained technicians who provide speedy and reliable installation, repair and replacement of the heating and cooling systems. An improperly installed and sized HVAC can lead to leakage of deadly carbon monoxide or other toxic gases into your home, escalate your expenses, and promote mold growth leading to fires or chronic illnesses. The most important job of a HVAC technician is to conduct a load calculation that considers extended variables including ventilation needs, insulation levels, windows, and local weather apart from the size of your house alone. To be well-protected and worry-free from the dangers of risking your home’s safety, hire the services of a professional HVAC installation and maintenance company and save a huge chunk of your savings and get an unbiased suggestion on whether to repair or replace your HVAC system.
Dynamerican offers premium installation and maintenance of HVAC Systems and has been in the business since 1957. Our services don’t let you suffer the extremities of heat and humidity by ensuring that your air conditioner is functional to its utmost efficiency. We have a strong base of customers who trust us for all heating problems related to base heating, central heating systems, thermostats, heat pumps, boilers, furnaces, and service maintenance. Please contact Dynamerican at 800-362-8490 or http://www.godynamerican.com/contact-us
Source: http://www.godynamerican.com/blog/should-you-replace-or-repair-your-hvac-system/
Are Your Professional Industrial Cleaning Services Impressive?
Don’t scare away people; Have cleaner and healthier workplace instead! Often warehouses, depots, factories and other such industrial spaces are neglected of hygiene. In this sophistication all around, more people like to have an environment that looks as well as feels neat and tidy.
Undoubtedly, every company including yours might have hired professional cleaning services. But do they do their job perfectly? This could be answered accurately by your clients, employees and customers as they are the ones who can observe unnoticed problems. For keeping a check on the performance of your industrial cleaning services, you just have to ensure these things go well –
The Drainage – Do you know what hurts more than anything else? A stinking and leaking bathroom.. Americans are very particular about hygiene and a clean and fresh restroom speaks more than anything else about your cleanliness. Professional companies provide drain & plumbing solutions that are not just restricted to repairing and fixing leakages but ensuring a smooth functioning of the systems.
By-pass plumbing fosters safe equipment repair. It saves the work and time in excavating a big patch of land.
The Grease – Get rid of the greasy layers. Grease forms everywhere and anywhere and can mess up with the functioning of the industrial equipment. It can be hazardous too. Check whether your industrial cleaning services work proactively to clean up the grease traps.
Others – Industrial cleaning includes cleaning of ducts, exhausts, heat exchangers, tubes, vessels, etc. and many other care, maintenance and sanitizing solutions. Qualified technicians look after the proper functioning of your industrial tools and contribute to improving workers’ efficiency.
If you are in need of experienced & friendly technicians, Dynamerican is highly recommended. Dynamerican servicemen are trained to respond quickly to assist you whenever you need while minimizing any interference to your daily business operations. We have a strong portfolio including drainage, gas installation, plumbing, CCTV inspections and septic care. We are the firm to trust for your infrastructure maintenance.
Source : http://www.godynamerican.com/blog/are-your-professional-industrial-cleaning-services-impressive/
A Step By Step Guide to Heating Systems Installation
HVAC stands for Heating, Ventilation and Air conditioning. Unlike any other electronic appliance, you just cannot survive without an HVAC system as it is responsible to maintain the indoor air quality of your home or commercial space. They serve an intelligent way of cooling your entire home quietly and conveniently.
Follow this step by step guide to install the HVAC system successfully:
Locate an unconditioned space
Areas such as garage, attic, basement, closet, utility room or crawl space are perfect as they can protect the fan coil unit from weather. However, check if you are violating the local codes. Don’t forget to check the location of return air filter box and duct. You need to install a secondary drain pan and/or a drain switch too.
The unit may be installed on a platform or suspended from a pre-assembled suspended platform and must be close enough to the selected return air box opening.
Cut open the return box opening
Select where to cut the return air duct. Preferably avoid installing it in the kitchen, dining room or living room, unless the duct can be installed with a 180 degree bend. Now, the fan coil is ready to pass through the opening. But you can wait until complete installation as you may want to pass materials through this opening.
Build a platform
Note the size of the fan coil unit and construct a simple platform. Detailed instruction in the instruction manual will help you. Recommendations suggest use of 2- by 8-inch stud lumber and a minimum of 1/2-inch plywood for platform construction.
Use the provided isolation strips under the unit for better performance. For a suspended platform, hold it by ¼ inch threaded rods. Also, leave some room for servicing.
Attach supply plenum ring
The supply plenum ring must be attached several inches lower than the fan coil unit to help the fan move past the platform edge to accommodate the plenum ring. Before mounting the ring, ensure that the plenum ring gasket attaches to the fan coil cabinet.
Get the condensate drain connected
Connect the condensate drain to the unit by referring to the instructions. Remember to run the drain line (pitched ¼ inch per foot) from the trap to a suitable drain and be sure to check with the local codes. Take care not to connect to a closed drain system.
Attach the refrigerant lines
You are ready to connect the refrigerant lines from the outdoor condensing unit to the indoor fan coil unit. It is really important to follow the instructions in the outdoor unit manual for proper installation
Connect plenum duct and supply tubing
Considering you have already done the sizing calculations, the plenum duct can now be run in any location that is accessible for the supply tubing attachment. We suggest keeping a distance of 18 inches between the plenum duct components and the fan coil unit. Also, it is better to keep the use of the elbows and tees to a minimum to maintain the heating systems pressure.
Some other important instructions:
Cut off the male end of the first section and then proceed to inserting plenum duct section (pushed tightly) into receiving collar on the fan coil unit. Now, it is time to flatten the sheet metal tabs against the plenum duct and insert the flat head pins.
The piece of foil face insulation must be wrapped and taped over the taped joint & against the fan coil unit.
Continue to assemble plenum duct ensuring that the shiplap joints are snug & securely taped.
Connect Terminator Outlets And Sound Attenuation Tubing
Mark the locations for the room terminators to be installed & ensure that its center is 5 inches from the wall edge. Drill a 1/8 inch hole and allow 2 inches of clearance around. Assemble the room terminator to the sound attenuation tubing by fitting the connectors tight.
Install the supply tubing
It’s time to complete the installation process by installing supply tubing. Cut the supply tubing & install the connector by threading it to the cut end. Avoid sharp bends to invite less repair and maintenance. Place the plenum gasket & takeoff connector into the plenum hole. Then insert the plenum fasteners and snap those using pliers. Install a connector into the remaining open supply tubing end and connect the connector from tubing to the plenum takeoff. Complete the installation process by installing your return air duct and return air box.
Now that you know how to install your HVAC, heating system, you can monitor the serviceman doing the process and instruct him wherever necessary. Please do not try to do it yourself as professional technicians have a better hand over it. Dynamerican is teamed up with qualified technicians who can install and repair the heating systems of all leading brands. We serve residents of Medina, Akron, Wadsworth, Portage Lakes, Copley, Canton and Cuyahoga with our 24x7 emergency services. Call us for any heating plumbing, repair and maintenance & base heating services.
Source : http://www.godynamerican.com/blog/a-step-by-step-guide-to-heating-systems-installation/
All You Need To Know About Septic System Installation
We have seen a recent spurt in commercial and industrial properties with no access to the public sewage system. Waste water is one of the biggest pollutant causing health hazards. This waste water has to be treated and handled systematically. The Septic system is an onsite water management and treatment system that is commonly installed in residential and commercial properties.
Waste water management systems are of two types:
1) Gravity fed
2) Alternative system that includes aerobic treatment unit
Before you begin the septic system installation, remember to get all the relevant permits as required by your state, city or county.
Preliminary check list
Before you design your onsite septic system, you must consider the size of your land, the depth of the water table during different season, bedrocks, access for maintenance and future replacement options.
A septic tank is usually 12 feet X 8 feet, though it can be of a different size depending upon the number of people. The drain field is usually two lateral 150 feet long and 10 feet apart for most homes.
Only after you have got the clearances, it is worth installing the wastewater management system.
A guide to septic tank installation
Embedment material, fittings, hand saw and glue.
Place the pipeline from the home/building to the septic tank pit.
The flow of wastewater in a gravity fed system must flow downhill. As no mechanical discharge method is used, gravity works to discharge the waste from the tank.
Else a pump and a distribution box needs to be set up for a mechanical septic tank system.
A concrete aerobic divided tank and perforated pipes that are embedded in the gravel are used in this system.
Excavate a large hole to set the concrete tank below the ground level. The lower section of the tank receives all the effluents after a bacterial breakdown which is further broken down before it is drained into the leech field.
The upper section of the concrete tank receives all the wastewater and effluents from the house or building
The drop in the pipe from the home to the septic tank is calculated as: length of the sewer line from house drain X 1/4th inch drop per foot = drop in pipe level in inches. A little more pipe drop is convenient and practical too
Inspect the septic tank for damages. The tank should be water tight so it does not contaminate the drinking water
Place the perforated pipe in the drain field with the end cap
Get the system inspected by the authorities. Once it is approved, cover up the area with as per the regulation of the health department
In case of the alternative septic tank, install a pump chamber after installing the septic tank. This chamber hosts the electric pump which is used to move the effluents from place to place and ultimately to dispose it into the drain field
Drainfield
The most common types of drainfields are rock drainfield system and chamber trench drainfield system. Excavate a trench that contains the distribution system. The trench should be excavated in a soil that is dry and crumbly as wet soil decreases the capacity for the soil to absorb the wastewater.
The trench should have almost no slope, though a 3 inch per 100 feet drop is acceptable. Place gravel at the bottom if required, place the perforated pipe and cover it with loose rocks, which should be absolutely free of fine material. Make sure that the perforated side of the pipes is not facing down.
If you are installing a distribution box, then one more trench will be required. Do remember to check as per the local regulations. The distribution box must lie undisturbed.
Note:
Contact the utility companies before you start digging.
You may set up the septic system, but septic tank field maintenance is very crucial for efficient working of your wastewater management system. Plumbing companies like Dyanamerican offer septic service that includes installation, inspection and maintenance of the septic system. Availing septic services of professional reduces your repair and replacements costs as well as eliminates the health hazard due to water contamination.
For all your wastewater management needs, contact Dynamerican now to get the best quote for septic services.
Source : http://www.godynamerican.com/blog/all-you-need-to-know-about-septic-system-installation/
Is Your Money Going Down The Drain?
Don’t let your hard earned money go down the drain in the literal sense. Drain blockages result in draining your money and upsetting your budget. Proper plumbing and drain cleaning helps you to save on the cost of repairs as well as the headache of the stink caused due to blockage of the drainage system.
Every building, whether commercial or residential has a drainage system, which needs to be cleaned and maintained for free flow of the waste water. Maintenance and periodic plumbing drain cleaning are required. The floor drains are a breeding ground for micro-organisms as food, air and moisture is available for their growth and multiplication. There are two types of pathogens, one is the free pathogens that float on the water and the other that are embedded in the bio film formed inside the drains. The floating microorganisms can be destroyed by the drain cleaning procedure. The ones that are embedded in the bio film need special treatment.
Effective drain cleaning procedure
Brush the drain with a cleaning solution and rinse it. Make sure you select the correct brush size and use a round brush movement to clean the drain. An up, down movement will break the pathogens structure, which may probably come up when you rinse the drain
Underground drain pipes cannot be reached by a brush. Professional drain solution providers use technology and powerful equipments to clean the drains
How to choose the plumbing and drain cleaning service provider
There are numerous plumbing solution providers listed in the USA. It is overwhelming to identify the right drainage solution provider for your needs. A plumbing company that offers the following is the right company for your plumbing and drain needs.
1) Should locate the drains using technology
2) Must offer video line inspection for your sewer lines
3) Should have equipments like high pressure sewer Jetters for drain cleaning
4) Expertise in removing the root blocking
5) Design and install grease traps
6) Perform a back flow test
7) Use of equipments like Maxliner Systems for no-dig sewer pipeline repairs
Blocked drains are a major reason for health hazards. It is very important to maintain the drains and get them cleaned timely. For all your plumbing solutions and drain cleaning requirement, Dynamerican is the leading drain solution provider in the USA. With trained and professional staff, Dynamerican offers 24 hour on call emergency service to solve all your plumbing problems.
For installation of septic tanks, plumbing and drains lines, plumbing fittings, heating and cooling equipments at industries and residences, just call Dyanamerican to get the quote and be assured of the best drain and plumbing solutions.
When It Comes To Drains And Sewers…
‘Keep the water flowing’ is the secret of efficiently working drains and pipe lines. Clogged drains and sewer lines are clogged due to soap, hair, toilet tissue, other toiletries, liquids and most of the time food.
Some Do’s and Don’ts of drain cleaning:
DO NOT use drain cleaners available at local grocery stores as they are efficient only for slightly clogged drains, I call them a quick fix solution that lasts for about two days.
DO NOT drain vinegar and hot water down the drain though this is considered a great household tip for clogged drains. Vinegar being acidic simply disintegrates a part of the buildup and damages the pipes, replacement of it is a costly affair.
DO NOT attempt to snake the drains by yourself. The steel cable can cause damage to stuff around it and chances are there that you may get cut by it too. It may be cheaper to rent the snake, but you may end up paying more if the coil snaps and causes damage.
DO GET the sewer lines jetted by professionals, who normally use a camera to identify whether the clog is in the drain or the sewer line and the treatment that is required.
DO GET the drains snaked by professionals for removing debris or any other material that prevents the free flow of the water.
Drains and sewer lines can get clogged in commercial as well as residential establishments. Plumbing and sewer cleaning services are offered by established companies offered drain and plumbing solutions. Leading companies like Dynamerican offer plumbing and drain solutions that are carried out by experts trained in the field to handle all drain and sewer issues.
Commercial drain cleaning involves grease removal and heavy drain cleaning. This is carried out with hi-tech equipments like high pressure Jetters and maxliner systems. Residential drain cleaning usually involves jetting the clogged food build up, clogging due to toiletries. Blockage due to roots in the pipe is the biggest cause of drain/sewer blockage.
Well established and reputed plumbing solution companies make use of CCTV to identify the exact location and cause of the blockage. Regular cleaning and maintenance of the drain lines is the best way to prevent huge costs. Clogged drains are a major cause of health hazards.
How to prevent sewer line clogging:
Throw toilet wastes like toilet paper, tampons, etc. in the waste basket and not flush it down
Prevent kids from dropping toys into the toilet
Do not dispose solid wastes into the floor drain as the debris clog the sewer lines and cause overload on the plumbing system
Do not drain kitchen wastes like fats, oils, vegetables into the drain. Collect and dispose them in the trash bins. When food accumulates in the drain pipes, not only does it clog but gives out a foul odor too
Dynamerican, is a leading plumbing solutions company based in Ohio that offers sophisticated drain and plumbing solutions for old and new establishments. With use of the Rover technology, the plumbing experts inspect the drain lines with a closed circuit television camera to identify the problem in the drain pipes. For the roots that cause clogging, the Madreal testing and foaming root treatment is available. The no dig blockage removal technique ensures that the landscape is not ruined and only that area of problem is dug up to repair the pipe. For all your plumbing and sewer cleaning needs, contact Dynamerican now to get the best services at the most affordable rates.
Keep The Cooling System In Top Shape-The Cooling System Maintenance Checklist
Non performing HVAC systems are a burden not just on the pocket, but the environment too. To ensure that the HVAC systems perform efficiently, regular inspection and maintenance by licensed professionals is mandatory. This not only helps you to lower the electricity bills, but also extend the life of the equipment.
Maintenance Checklist for HVAC systems
Replace the filter every 90 days, though check it every month. Replace it with the pleated filter, which Is more efficient
There should be at least two feet clearance around the outdoor heat pump/air conditioning unit
The thermostat setting should be set to cooling or heating that is comfortable for you as that will save energy
Check the voltages on motors and tighten all electric connections
All moving parts should be well lubricated to reduce friction
The condensation drain should be inspected as a blocked drain affects the humidity levels and may cause water damage
The controls of the HVAC systems should be checked for safe operation. The system must start, operate and shut off properly
The coils of the condenser and evaporator must be cleaned to sustain the cooling efficiency of the HVAC cooling system. If the coils are dirty, more energy is required to cool the area, which makes the system run longer, use more energy and increase the power bills
The central air conditioner refrigerant level must be checked and adjusted for optimal performance of the cooling system. Too less or too much refrigerant increases the cost, reduces the life and efficiency of the HVAC system
The blower components must be cleaned and adjusted for proper air flow and comfort levels. The blower assembly consists of a blower housing, blower wheel and motor
For older models of the HVAC system, the motor needs lubrication and the fan belt may need to be replaced
Inspection of fan motor and blades
Control box includes contractors, relays, circuit board, capacitors and other accessories. The control box must be checked for damage to the electrical parts
The compressor and associated tubing should be checked for damages
Inspection of the duct line for leakages in air flow
When the system is in operation
Monitor the system for its capabilities
Make a note of an abnormal sound if any
Search for unusual odors
Check the vent system for blockages or irregular air flow
Call the professionals every spring and fall to inspect the HVAC systems in homes, offices or industries. You can prolong the life of your HVAC system by following a code for cooling system maintenance. It is a good idea to enter into a contract with licensed HVAC installation and maintenance contractors to maintain the equipment and prevent unwanted expenses.
Professional Drain Cleaning – A Necessity
Properly maintained drains are important not only from the production point of view, but as per the EPA guidelines as well. Drain cleaning is basically unblocking the drain pipes to prevent clogging and other drainage problems. When the sink or toilet gets clogged, the plunger usually solves that problem. If it continues then it becomes necessary to determine whether the blockage is due to the drain pipe or the septic system.
Cleaning the drains is complicated as there is a network of pipes that are interconnected. Using some chemicals that are available in the market is a temporary solution to the drainage problem. There are industrial cleaning services companies that offer drainage solutions by use of the latest equipment and technology.
The different types of cleaning service offered by most of the leading plumbing companies are:
Lift cleaning
The debris and grease is removed from the bottom of the lift station, which is a low gravity point. All the rails, floats, rags are lifted so as to protect the pump impellers. The use of CCTV for inspection is widely applied.
Trench Cleaning
In most cases there is no need to dig the land or remove the soil for drain solutions. The trenchless technology uses sewer pressure jetting, vac-jet technology or hydro-excavation unclogs the pipes efficiently.
By Pass Plumbing
Most leading plumbing companies conduct a video line inspection to identify the exact spot and plan the troubleshooting drainage plan. This avoids land excavation and helps to repair the equipment or drain
Vactor Service
This is a service that is designed to clean sewer lines between manholes. The high pressure sewer jetting clears the chunks of debris that may cause blockage. This cleaning plays a very important role in industrial cleaning applications which helps to avoid major and minor drainage disasters
Grease Management
Industrial grease management and septic care increases the durability of the drainage system. Industrial drains get clogged due to hazardous deposits of grease. This ruins the quality of water as well as drains the drains. Grease traps help to avoid warping off the drains and retain the quality of water. Whether you are a homeowner, municipal, commercial owner, specialized grease management is required to avoid replacing pipes and restore sewage functionality.
Regular drain cleaning reduces the risk of emergency drain repair and industrial cleaning services offer a cost effective management program.
Read more here Professional Drain Cleaning – A Necessity
Is It Worth Installing The Septic Tank By Yourself?
Septic tanks are used in areas where waste water treatment is not available. Usually in rural areas, septic tanks are installed, which use two types of systems. They are gravity fed or aerobic treatment units that are the alternate systems.
Installation of the gravity fed system
1. Assemble the backhoe tractor, trencher, shovel, dummy level rod, PVC pipe, glue, fittings, hand saw, coarse file and embedment material
2. Obtain required permits that include a test report to determine the size and type of drainage. This test is usually done by the local health inspector and is governed by the local regulations
3. Plan the flow to go downhill so no mechanical device is used to discharge the water. You will need a concrete aerobic divided tank and perforated pipe embedded
4. Excavate a large hole to set the tank which comes in two pieces. One section receives the effluent where it is broken down by bacterial activity while the second section breaks it down further before it flows into the field
5. Hold the pipe steady by embedding the pipe in gravel. The pipe should have no slope
6. After inspection, cover the tank as per the health regulations in your area
Installation of alternate septic system
1. Excavate the ground to set up the pump chamber which moves the effluent
2. Get a licensed electrician to install the electrical part
3. Draw the layout of all the sewers, locations and depth of all the tanks so as to route the effluent lines. Get the septic tank plan approved by the local health authority
4. After inspection, cover the pressurized lines
Tips and tricks
§ Aerobic bacteria have to be added periodically
§ Every step of installation requires inspection and approval by the health department
§ Either you can use sand or gravel to embed the perforated pipe as the pipe moves and can cause damage
§ Ensure that the perforated pipe is not turned downwards and put the end cap on each line else water may enter the pipe and overflow from the leech holes
§ Check with the local authorities if you can use this water for irrigation or other purposes
Cost breakdown for installing a septic system by self
Tank: can be of fiberglass, polyethylene or concrete. The cost will depend on the material and the size
Drain gravel: will depend on the type of soil
Vaults: can be made from different materials, though plastic is the preferred choice
Piping: the length of the pipe will determine the cost
Labor and design: you need a qualified engineer and a contractor who specializes in septic tank installation so as to get the necessary permits
Soil testing: is done before the official approval of the septic tank
The cost of building the septic tank varies from region to region
The best alternate is to contact Dynamerican , the septic tank specialist for the most reasonable quote and not only get the septic tank installed, but also take benefit of other septic services and septic drain field maintenance.
Contact dynamerican now to find out the cost of septic tank for your city.
Septic Tank – Construction, Operation And Maintenance
Septic systems are on-site wastewater management systems. These are common in industrial as well as residential properties. This septic system is developed when there is no access to a public sewage system. The waste water from commercial and residential units is collected and transferred into a septic tank where it accumulates. This grey water is treated to decompose the grease and solid settlements after which the effluents are disposed off safely.
Design and introduction to a septic tank
A septic tank is basically a tank that allows solids to settle to the bottom and the scum to float on the top. This is decomposed and eventually leached into the field after the effluents are filtered.
The basic requirement a home owner must understand is:
The size of the tank depends on the number of bathrooms as every county has its own norms to check the leach field capacity
The tank must be at a lower level than the house and the leach field lower than the septic tank
The septic tank must be at least 200 feet away from any water source
There should be no heavy equipment movement over the pipe connecting the septic tank to the field or the leach field
Septic drain field maintenance
· Depending on the usage, the tank should be pumped every 1-4 years
· There should be no heavy objects on the leach field
· No items should be introduced directly into the septic tank
What not to drain into the septic tank
Non degradable items like grease, chemicals, cigarette butts, eggshells, bones, napkins
Do not over use water
Tips
It is advisable to use a trash compactor as it helps to keep disposal use to a minimum.
Why septic system and its maintenance is critical?
Replacing or repairing the septic system is a very expensive affair. A new system can cost up to $ 3000 while a routine inspection and pumping will cost around $ 100.
Improper handling and disposal of wastewater proves to be a health hazard. A failed septic system contaminates the water sources like the well and the ground water as well, which poses a great danger to health when combines with human waste.
Conclusion
A well designed and properly installed septic system cuts out on the cost as well as eliminating the possibility of water contamination which prevents a health hazard. Septic system problems do not show up instantly, it is a slow process which results in complete failure of the system if ignored.
Leading septic system installation and septic service providers offer maintenance service and take care of all the septic system needs for a safe and happy living.
Prevent Drain Clogs This Festive Season
Halloween pumpkins have caused havoc in the drain pipes. The sticky, stringy, slimy pulp is scraped and dumped in the drains in every American home. Whether you have carved jack-o-lanterns or anything else, this October and pushed the scrapped stuff into the sink is the biggest mistake made.
The pumpkin chokes the garbage disposal and the seeds stick to the wall on the pipes. Once the water dries ups, these solidify like concrete and most liquid drain cleaners cannot get rid of this pumpkin garbage.
Now Thanksgiving is just round the corner. Every traditional dish is a potent clogger for the drainage system. Be it the grease from the turkey, which is hot and oily or the potato peelings and rice. The turkey drippings turn into a candle like wax on cooling while the potato and rice turn into a starchy blob. The stuffing is covered with bread crumbs which converts into starch and grease, which clogs the pipe.
Toss all these food items into the garbage can along with all the leftover on the plates, in pots and pans which must be scrapped thoroughly. This is the time when guests and family is staying at home too. Look out for the slow drain which is a sign that it may be partially blocked. With more people in the house, there are more people taking showers, doing more laundry and also flushing personal toiletries like toilet tissue etc. into the toilet. The extra activity may cause a blockage in the already slow drain which may ruin your holiday.
Be it your residential or industrial complex, drain blockage issues may arise anywhere. The network of interconnected pipes can be interrupted with a single clog in one of the pipes. Experts are needed to identify the clog and use advanced technology for smooth flow of sewage in the drains. A blockage in the drain pipes may result in the complete shutdown of the industry or plant.
If your sewer is partially clogged, call Dynamerican, the drain cleaning services provides for homes and offices to avoid a catastrophe on Thanksgiving. Dynamerican, a JMT Group company based in Ohio are plumbing specialists since 1957 offering the highest quality of service and best plumbing solutions for residential and industrial plumbing needs. The services offered are lift cleaning, trench cleaning, by pass plumbing, vactor services, grease management and complete septic tank management.
To enjoy Black Friday shopping get your drains and sewer system cleaned and cleared by Dynamerican now. Contact now to get the best quote for Residential and Industrial Cleaning Services & Drainage Solutions and prevent the drainage problem this festive season.
Read More Here Prevent Drain Clogs This Festive Season