#cosplayp

[rebloghogs]

I wore my Tulip cosplay from Infinity Train to Anime Next this weekend =D 

I didn’t have time to post draft photos before the con, so I took some after. I made the jacket, leggings, skirt, glowy-hand attachment, and one-one. I couldn’t find the draft I did for the skirt, but I did find the leftovers of the fabric I used. I dyed the jacket fabric (originally white) with with Rit Synthetic Peacock Dye and iPoly Green Dye. The skirt was dyed with Rit Synthetic Frost Gray Dye and Rit Black Dye. The legging’s fabric was bought with the color seen above. The white undershirt, boots, and backpack were bought from Amazon. 

One-One was made using 3D printing and was made of about 13 different pieces (not including nuts, the rod, and screws). I will upload something later about this and more pictures of what it looks like on the inside. 

The numbers were also 3D printed, while the green sheet was electrical-cuttable paper bought from ebay. It glows VERY nicely in dark spaces and gives a nice effect when taking photos. 

I took seflies and my friend took a few photos of me over the weekend, so I’ll upload those later ^>^

[placesk]

Journey Through The Galaxy

[placesk]

Journey Through The Galaxy

[placesk]

Journey Through The Galaxy

[placesk]

Journey Through The Galaxy

[placesk]

Journey Through The Galaxy

[rebloghogs]

I’ve come to the realization that I spend far too much time on making simple things like this 

Hey guys! Here is what I plan to work on for the next year! I messed around with some patterns and estimated prices over the past few weeks, and I believe I have a good idea of what I want to do. 

“Working on First” section is basically what outfits I want to work on first. This doesn’t mean all of them will be done at the same time, but that I’ll prioritize them over others. The “Maybe/Ehh??” section are things I’m still uncertain on due to either groups not being fully formulated, old projects I’m not sure if I want to revive, wonky proportions (looking at you Mipha), or cosplays I’m not into anymore. Below are my plans and what else I’m going to do.

For the “Working on First” section, I have (top left to bottom right):

- Mercy (Valkyrie skin), Princess Leia Steampunk (Noflutter design), Swoobat (Cowslip gijinka), Cherrim Sunshine Form (Cowslip gijinka), Tulip (Infinity Train), Suki (Avatar), Ballroom Mech Boss (NieR: Automata).

These were all chosen for a number of different reasons, mainly because I wanted to challenge myself in different fields I consider myself weak in (i.e. wigs and armor making).

For the “Maybe/Ehh??” section, I have (top left to bottom right): 

- Lapis (Steven Universe), Raven (Noflutter design), Plusle (cowslip gijinka), Mismangus (cowslip gijinka), Tenticruel (cowslip gijinka), Vespiquen (cowslip gijinka), Mipha (Legend of Zelda: Breath of the Wild), Scorpio Armor (Me).

I’ll see how these unfold as stuff progresses. I’m probably going to work on Cherrim, Leia, Tulip, and Ballroom Boss first, but this will depend heavily on progress with my Research paper (potentially publishing :0) and grad school stuff. 

In other news, tonight I want to overhaul my layout and post pictures to my facebook and instagram so I can finally show those off. Yay progress~!

~ Thanks and cheers everyone UwU

[rebloghogs]

HNNNNGGG IT'S DONEEEE

I've never been happier *_*, this is (and probably will be)  the most time consuming part of this project due to the massive amount of ruffles and fabric needed for this.

Oh and also, I got a manniquein for Christmas (belated)! So now I'm going to be using that for quite a few of my projectw UwU (woohoo!)

I'll explain this project more in my next set of photos I'll be uploading in about 30 minutes (with me wearing it cuz it doesn't look as appealing without someone wearing it). Wanted to upload these progress shots though because I like having some progress shots here to store on my tumblr UwU