Concept art of Sierra Space's Dream Chaser (DC100) spaceship landing at the Huntsville International Airport, Alabama.
source, source
seen from Venezuela
seen from Germany

seen from Qatar
seen from Georgia

seen from Qatar
seen from Egypt
seen from Türkiye

seen from T1
seen from Türkiye

seen from Argentina

seen from Kuwait

seen from Türkiye
seen from Argentina
seen from Türkiye

seen from Germany

seen from Malaysia
seen from Germany

seen from Germany

seen from Malaysia
seen from Canada
Concept art of Sierra Space's Dream Chaser (DC100) spaceship landing at the Huntsville International Airport, Alabama.
source, source
Description of road construction
Description of road construction operation of single-layer surface coating: Road construction operation is to prepare a path on the ground with a specified width that users and users can cross from one point to another. Many two items of excavation and excavation in the operation They confuse civil engineering with each other. In fact, excavation is the low and high ground harvest and the excavation depth is about 60 cm. This means that in excavation, only low elevations and surface heights are removed from the ground. In contrast, excavation has another meaning. Excavation means removing the low and high ground with a depth of more than 60 cm. Description of single-layer surface coating road construction operations Road construction operations consist of three main steps: • Asphalt bitumen base • Primekt foundation • Final pavement of surface coated asphalt - single coat (Tack Coat) to impregnate any asphalt or concrete surfaces with bitumen and Bringing adhesion with a new asphalt layer A variety of liquid bitumens are used as a thin layer. This layer is called surface coating (single coat) and creates a connection between the pavement surfaces with each other. Obviously, the use of surface coating is necessary to create adhesion between the two layers of existing and new asphalt. The use of emulsion bitumens is recommended to apply a single coat layer and the use of soluble bitumens should be avoided. CRS-1 and CRS-2 emulsion bitumens are recommended for applying single coat top layer. Due to the rapid breaking of the emulsion and the rapid readiness of the new asphalt layer, these two types of emulsions are more suitable. The amount of emulsion bitumen required for surface coating is about 250 to 500 grams per square meter. Although the exact amount of consumption is determined by the monitoring device, the amount of emulsion bitumen used on old and worn asphalt surfaces varies according to the amount of damage compared to new asphalts. The best conditions for performing a single coat at a temperature of 15-10 degrees Celsius and in such conditions should not be less than 5 degrees Celsius. Although it is possible to apply a single coat with emulsion bitumen in wet road conditions, but in rainy weather conditions or when it is likely to rain, it should be avoided. The important point is to apply the top coat on the same day that the top coat was applied. Obviously, during this period, traffic should be prevented from passing over the single coat layer, and before spraying bitumen, the road surface should be thoroughly cleaned of any contamination, soil and possible debris. To do this, you can use a mechanical vacuum cleaner and air compressor, and you must ensure that the single coat layer is uniform and the same size for all surfaces. It is important to control the bitumen nozzles and the angle and height of the spray nozzle from the road surface. The bitumen spraying machine must be equipped with the necessary tools and without defects, and it must have a speedometer and, if necessary, and according to the ambient temperature and the bitumen must be equipped with a heater. The bitumen spraying machine should be designed in such a way that the operator can activate or stop the spraying at any time and can control the volume of spraying and the machine and bitumen sprayer can circulate and heat the bitumen and can spray by means of a pump. . Also, the bitumen tank should be double-walled in order to maintain a constant temperature inside the tank. Characteristics of a good bitumen sprayer: • The quality and type of all nozzles of a bitumen sprayer should be the same. • The speed of the vehicle carrying the bitumen should be constant and uniform. • The height of the bitumen distribution pipe from the road surface is constant when the tank is full or empty. • The installation angle of the nozzles should be the same along the distribution pipe. • Bitumen sprayer must be able to change the width. • Bitumen sprayer should have internal plates to prevent bitumen turbulence in bitumen.
Dream Chaser passes latest NASA development milestone
Dream Chaser passes latest NASA development milestone
An artist’s rendering of Sierra Nevada Corporation’s Dream Chaser above the International Space Station. Image Credit: Nathan Koga / SpaceFlight Insider
Sierra Nevada Corporation’s Dream Chaser cargo space plane recently passed another milestone in its development to be the third commercial cargo freighter for the International Space Station. (more…)
View On WordPress
Dream Chaser completes successful glide test
Dream Chaser completes successful glide test
Sierra Nevada Corporation’s Dream Chaser lands on a runway at Edwards Air Force Base in California after a successful free-flight test. Photo Credit: Carla Thomas / NASA
Sierra Nevada Corporation’s Dream Chaser spaceplane test article successfully performed a free-flight testat NASA’s Armstrong Flight Research Center in California. The spacecraft is being developed to send cargo to the…
View On WordPress
Aerojet Rocketdyne chosen to supply Dream Chaser's power
Aerojet Rocketdyne chosen to supply Dream Chaser’s power
An artist’s rendering of Sierra Nevada’s Dream Chaser vehicle docked with ISS. Aerojet Rocketdyne will design and build the power system for the cargo ship. Image Credit: SNC
Aerojet Rocketdyne has been selected to supply the electrical power distribution system for Sierra Nevada Corporation’s (SNC) Dream Chaser spacecraft. The company will be responsible for designing, developing, manufacturing,…
View On WordPress
Dream Chaser set to begin Phase Two flight testing
Dream Chaser set to begin Phase Two flight testing
Image Credit: James Vaughan / SpaceFlight Insider
After upgrades and hardware testing at Sierra Nevada Corporation’s (SNC) spacecraft assembly facility in Louisville, Colorado, an engineering test version of the Dream Chaser vehicle will be transported to NASA’s Armstrong Flight Research Center (AFRC) in California within the next several weeks. (more…)
View On WordPress
Sierra Nevada achieves second Commercial Cargo milestone
Sierra Nevada achieves second Commercial Cargo milestone
Image Credit: Sierra Nevada Corporation
A couple weeks after completing their first Integration Certification Review for NASA’s Commercial Cargo Program to support the International Space Station (ISS), Sierra Nevada Corporation (SNC) has completed its second such review for the Dream Chaser spacecraft. (more…)
View On WordPress
Enthusiastic congratulations to the Sierra Nevada Corp for their winning a place in NASA’s CRS-2 program for DreamChaser Cargo spacecraft! The long-running legacy of the HL-20 spacecraft finally receives funding and missions to space!