#printer error

[charlesoberonn]

[nofollowgame]

🔶 printer errors in No Follow 「game」 :: File #000007

[tiger-in-the-flightdeck]

HELP??

Do any of my followers use a Pixma ts3120? I’ve tried finding the answer on their support site, but they have piss all for technical support.

I’m trying to print something in colour, and I have plenty of colour ink. The paper display shows 0 when the paper is put in. When the paper is taken out the display flashes the LTR and the 0 goes away but isn’t replaced with anything. If I press the Start button at the bottom of the button row, the display will read 1, and run the page through the printer, but doesn’t print anything on it.

When I hit the print button on my computer, half the time it will bring a pop up that says The Printer Is Not Responding, the other half it just does nothing at all.

I’m updating my driver right now, but I need to know if anyone has experience with this and knows what the fix is.

[kae-karo]

Printer Error - part 2!

You asked for it, so here it is! Part 2 to Printer Error (be sure to read part 1 first!)

All the thanks and love in the world to @phantasieblog and @laddyplester for betaing!

Printer Error - 16k word count Part 1: danisnotonfire Part 2: AmazingPhil

tw: implied sexual content

tags: meet-cute/first meeting au, fluff, implied smut, lots of awkwardness

summary: Dan’s a fanfic writer who’s desperate to meet the AmazingPhil, but one printing mishap could bring him closer to his idol than he ever anticipated.

Read on AO3

amazinqphil: You didn’t have to leave earlier! I promise I wasn’t bothered I didn’t think you were fangirling or anything

danisnotonfire: Why are you even bothering with the side account? I know it’s you I just didn’t want to be...THAT fan, I guess Creep you out or whatever Like, it didn’t seem creepy til I was sat there trying to justify why on earth I was sat there… And now I’m being too talkative. You don’t have to talk to me just to humor me, it’s fine

Keep Reading

[printer-error-offical]

[krispywafers]

something about low printer ink and the errors that comes out with a passport photograph...it's other worldly

[shortbread-crew]

Printer error bred by me

[repair-service-centre]

Troubleshooting Paper Jams in an HP OfficeJet Pro 9015 Printer

Paper jams are a common issue with printers, and they can be frustrating and time-consuming to deal with. If you're experiencing a paper jam in your HP OfficeJet Pro 9015 printer, don't worry – it's usually easy to fix. In this article, we'll go through a detailed list of steps to help you clear the jam and get your printer back up and running smoothly.

Here are Some of the Following Tips That Can help you Fix Paper Jams:

Turn off the Printer:

The first step in fixing a paper jam is to turn off the printer. This is important for two reasons: first, it will prevent any further damage to the printer or the paper, and second, it will make it easier to access the jammed paper.

Locate the Paper Jam:

Paper jams can occur at different points in the printer, so it's important to locate the exact location of the jam. Check the paper tray, the feeder, and the output tray, as well as any other areas where paper may be stuck.

Carefully Remove the Paper:

Once you have located the jammed paper, gently pull it out of the printer, being careful not to tear it. If the paper is stuck or difficult to remove, try gently wiggling it back and forth to loosen it. Be cautious not to force the paper, as this can cause further damage to the printer.

Check for any Remaining Pieces of Paper:

After you have removed the main piece of paper, it's important to check for any remaining bits of paper inside the printer. These can often be hard to see, so be thorough and check all the nooks and crannies. Use a flashlight to help you see inside the printer more clearly.

Turn the Printer Back On:

Once you have removed all the pieces of paper and cleared the jam, it's time to turn the printer back on. Make sure to follow the manufacturer's instructions for turning the printer on and off, as different models may have different requirements.

Print a Test Page:

To make sure the paper jam has been fully cleared, try printing a test page. If the printer is able to print the page without any issues, the jam has been successfully cleared. If the printer still experiences issues, you may need to repeat the above steps or try additional troubleshooting methods.

Check for any Damage:

If the paper jam was particularly difficult to remove, it's possible that the printer may have sustained some damage. Carefully inspect the printer for any visible damage, and if you notice any, contact HP support for further assistance.

Additional Troubleshooting Tips:

If the above steps do not resolve the paper jam, there are a few additional troubleshooting methods you can try:

Check the paper tray: Make sure the paper tray is properly aligned and the paper is not damaged or wrinkled.

Check the feeder: If the paper jam is occurring in the feeder, make sure the feeder is properly aligned and not damaged.

Check the output tray: If the paper jam is occurring in the output tray, make sure the tray is properly aligned and not damaged.

Check for any foreign objects: Sometimes, foreign objects such as paper clips or staples can cause paper jams. Make sure there are no foreign objects inside the printer.

Conclusion:

By following these steps, you should be able to easily clear a paper jam in your HP OfficeJet Pro 9015 printer. Remember to always turn the printer off before attempting to remove a paper jam, and be careful not to tear the paper as you remove it. If you continue to experience issues with paper jams, it may be worth contacting HP support for further assistance.

Source:- https://medium.com/@tomw78599/fixing-the-hp-officejet-is-in-error-state-error-223c1e8a5d27