#ptfexl.com

[bbqtableware]

Unique properties of industrial ptfe coatings

The unique properties of industrial ptfe coatings can become integral surface components of any type of parts, from easy-to-engage clutches and wear-resistant valves to coil springs that become silent. With appropriate equipment, industrial coatings can even be applied to specific areas of complex geometric components. , Such as the internal thread of REUSABLE GAS STOVE BURNER COVER a nut. Very few solid matter will stick to the coating. Although viscous materials may show some adhesion, the friction coefficient of low friction coefficient ptfe is usually in the range of 0.05 to 0.20, depending on the load, sliding speed and specific coating. Non-wetting Since the coated surface is both oleophobic and hydrophobic, it is not easy to wet.

Cleaning is simpler, and in many cases, the surface is self-cleaning. Heat-resistant PTFE industrial coatings can operate continuously at temperatures up to 260°C / 500°F. Unique electrical characteristics In a wide frequency range, PTFE has high dielectric strength, low loss factor and very high surface resistivity. Through special technology, it can even have enough conductivity to be used as an anti-static coating. Low temperature stability Many ptfe industrial coatings can withstand severe temperatures without loss of physical properties.

PTFE industrial cost can be used for temperatures as low as -270°C / -454°F. Chemical resistance ptfe is generally not affected by the chemical environment. The chemicals known to affect all industrial coatings are molten alkali metals and highly active fluorinating agents.

[bbqtableware]

The characteristics of Teflon bakeware determine the application

The Teflon baking sheet is the same as the Teflon high temperature cloth, which uses high-level glass fiber as the base material, and then passes through a unique process technology to produce high temperature resistant varnished cloths of various thicknesses and widths. Ningbo Xinlin teflon baking sheet has strong coating performance, high strength, good mechanical properties, and anti-stick and anti-stick properties. The Teflon baking sheet is made of glass fiber cloth with non-adhesive surface and high temperature resistance. The cooking liner can prevent oil drips and spills from accumulating on the bottom of the oven. After baking, the disc can be used directly without cleaning again. In the process of non-fat cooking, reduce the amount of fat, which can be cut according to the size of the bakeware and frying pan.

Teflon baking sheet characteristics:

1. Stable structure, high strength and small extension coefficient.

2. Good temperature resistance, continuous working temperature -70℃-300℃

3. The friction coefficient of the meter is small and the insulation is good.

4. It has a good anti-adhesive surface layer, good anti-adhesive property, non-burning, and anti-aging.

5. Good corrosion resistance, resistant to various strong acids and alkalis.

6. Can be arbitrarily cut according to the oven size;

7. The baking effect is good, and the baked food is more uniform and full;

8. Any side can be reused;

9. No oil leakage, no additives, suitable for low-temperature cooking;

10. It can be used without danger in low temperature, high temperature and microwave;

11. It can be used in the dishwasher, non-toxic and easy to wash.

[bbqtableware]

Application of PTFE tape in rubber industry

Ptfe tape is made of imported glass fiber yarn and coated with high-quality Ptfe (polytetrafluoroethylene) resin. After special treatment, it is coated with high temperature resistant silica gel to produce various thickness Ptfe tapes. Is a high performance, multi-purpose new composite product. Ptfe tape is divided into two types: Ptfe glass fiber tape and Ptfe film tape. Xinlin Organic focus on  manufacturing Ptfe tape over 20 years.

Mold release applications in the rubber industry

(1) Ensure complete demolding and reduce the rejection rate significantly;

(2) Easy demolding, reducing labor intensity;

(3) No mold release agent is needed, reducing costs and environmental pollution and preventing affecting rubber vulcanization and adhesion;

(4) There will be no glue particles on the mold, no need to shut down to clean the mold, which greatly improves production efficiency, reduces mold loss and energy consumption;

(5) The surface gloss of the product is uniform, which greatly improves the product grade;

(6) Ptfe coating has excellent adhesion, is not easy to fall off, and is very durable.

Advantages for shoe molds:

1. It is easy to remove and avoid the rubber particles sticking to the mold;

2. No need to remove the agent, to avoid affecting the paste effect and pollute the environment;

3. Matte rubber outsole with uniform color;

4. Reduce the color mixing phenomenon of multi-color rubber background;

5. Phylon (secondary vulcanization) mold does not need to be pre-coated with soapy water, which speeds up production and reduces pollution;

6. Reduce the rejection rate a lot;

7. Coating life is more than 4,500 times;