Discover Top Posts Tagged with #slicer

ᴹᴼᵀᴼᴿˢᴸᴵᶜᴱ ᴬᴾᴾᴿᴱᶜᴵᴬᵀᴵᴼᴺ ᴾᴼˢᵀ ⛓️🪚🏗

-🎮🐝✨️

#srslygames #motorslice #slicer p #SLICER #LOOK AT MY CUTE LIL WIFEY #i loveee her ahhhhhh #I YEARN FOR ANOTHER GAME OF HERS AHHHHHHH

Pantone color of the year 2026: Slicer

#motorsclice #slicer #boss sl-2 #Bandcamp

3D Printing Buying Guide for Hobbyists: Materials, Slicer Tuning and Strong RC Parts.

Getting started with 3D printing for hobby projects and RC builds can be overwhelming, but the right choices narrow the learning curve and give better results from day one. This guide focuses on practical buying decisions and tuning tips that matter for PLA, PETG and TPU, plus slicer settings and structural considerations for load-bearing parts. Read on for a concise checklist you can use when shopping and setting up your printer.

Choosing the right filament is the first step and each common polymer has a clear role in a hobbyist workshop. PLA is stiff, easy to print and ideal for aesthetic parts, jigs and prototypes, and it usually prints well at 190–220°C with a 50–60°C bed for adhesion. PETG gives better toughness and chemical resistance than PLA and is a good default for functional parts and many RC components, but it likes a slightly higher nozzle temperature of 230–250°C and benefits from reduced cooling to avoid layer adhesion problems. TPU and other flexible filaments are indispensable for soft bumpers, shock-absorbing mounts and grips, yet they need a direct-drive or high-quality extruder, slow print speeds and minimal retraction to print reliably, so check your extruder type before buying flexible filament.

Slicer tuning beats hardware upgrades for improving print quality and strength most of the time, so learn a few calibration routines that pay dividends. Start with flow calibration and a single-wall extrusion test to set the extrusion multiplier, then print temperature and retraction towers to dial in stringing and layer bonding. For structural prints, increase outer wall count and perimeters rather than relying solely on infill percentage, and use 20–50% infill with a strong pattern like cubic or gyroid for parts that must resist impact and twisting. Layer height relates to strength and speed; taller layers reduce print time but can reduce inter-layer bond efficiency, so choose 0.16–0.28 mm as a compromise for most hobby parts.

Design and slicing choices make or break RC parts that need to survive crashes and vibration, and orienting parts to distribute load through multiple layers is critical. Aim for at least three perimeters for control surfaces and structural mounts, consider 0.4–0.8 mm nozzle sizes for faster, stronger prints, and use fillets at high-stress corners to reduce stress concentrations. Heat-set inserts, threaded brass nuts and light epoxy can significantly improve joint reliability in bolted connections, and post-print steps such as annealing PETG may increase toughness when dimension control allows it. For project examples, build notes and supplier links that helped me through troubleshooting, visit WatDaFeck for practical references and project write-ups that hobbyists will find useful.

When buying a printer for structural and RC work, look for a rigid frame and a decent heated bed as baseline features and choose a printer with either a direct-drive extruder if you plan to use TPU or a reliable Bowden setup for mostly rigid filaments. Consider the community and spare parts availability for the model you choose, check whether the firmware supports features like linear advance or pressure advance for smoother extrusion, and confirm slicer compatibility with Cura, PrusaSlicer or SuperSlicer for advanced tuning. Finally, buy decent filament from recognised brands where possible, keep spare nozzles in a range of sizes and invest a small budget in a good digital calliper and a flush cutter for finishing prints.

Follow me on: Facebook | Instagram.

#printing #buying #hobbyists #materials #slicer #tuning #strong #parts #rc planes #fpv #model aircraft #radio control

Pourquoi OrcaSlicer FullSpectrum ?

Si vous suivez l’actualité de l’impression 3D, vous savez que OrcaSlicer (un fork de Bambu Studio, lui-même basé sur PrusaSlicer) est devenu en un temps record le favori de la communauté. Avec l’initiative FullSpectrum, les développeurs franchissent une nouvelle étape : transformer un simple logiciel de découpage en une suite de contrôle totale, optimisée pour chaque nuance du spectre de l’impression. Lire la suite 👉 https://www.lemondedu3d.com/orcaslicer-fullspectrum

#impression3d #imprimante3d #slicer #orcaslicer #maker