Biotech Packages

[biotechpackages08-blog]

Biotech One of the best Packaging Companies in Lahore Provide quality to clients

The safety of paintings during transportation and storage directly depends on the type and quality of packaging materials using by Packaging companies in Lahore. Therefore, it is important to know what can be used as packaging and whatnot. Use the following guidelines for this.

What materials to use for packaging

There are a number of packaging materials that are used in a particular case:

Bubble wrap. It distributes the pressure and impact of other physical factors throughout its surface, thereby protecting the picture. The film performs two important functions: it serves as a pillow in case of impact and fills the empty space so that the transported object does not move inside the package. Therefore, it is needed as the upholstery of the package and/or filler.

High-quality packaging tape. It must be strong enough so that the outer packaging bag does not tear or open. Another task of the tape is to ensure complete tightness of the seams and to prevent moisture from getting inside. It is better to take the tape in rolls for ease of use.

Permanent acid-free paper. It is needed to wrap the picture for transportation and storage. As a rule, the pH of such archival paper is neutral and varies from 7 to 8.5, so there is no chemical interaction with the objects with which it is in contact. It is recommended to buy roll glass for the convenience of packaging.

Styrofoam. This material is needed to transport paintings that cannot be rolled up. It has a different thickness, sold in many stores.

Protective corners made of cardboard. The corners of the paintings are especially vulnerable during transportation. That's why they should be protected with cardboard corners. You can buy them in a store or make them yourself. Frames may also be used.

Pipes. When transporting pipes, they bend easily, so you need to take advantage of the offer of companies that specialize exclusively in the delivery of goods in pipes. For cardboard packaging, it is recommended to use them in the amount of three pieces: two internal and one external according to the principle of nesting dolls. For especially large works, PVC pipes (plastic) are suitable, which are usually used for plumbing works and are sold in a hardware store. It must be borne in mind that pipes on both sides must be securely closed with caps.

Remember: if you are worried about spending money on quality Packaging companies in Lahore, buying cheap packaging materials can go sideways due to damage to the picture.

 What can not be used for packaging paintings

Never use the following materials:

Packaging tape of poor quality. The safety of a work of art is not the case when you need to save. First of all, a low-quality tape requires more time and effort into the packaging process itself. Secondly, it is not very durable and can burst during transportation. Thirdly, such a tape will not provide moisture protection due to the use of appropriate glue.

Styrofoam. It settles during transportation and does not provide the proper level of protection.

Used fillers such as old newspapers, magazines, plastic bags. They will leave a negative impression on the seller and will not protect the work.

Paper for wrapping paintings of inappropriate quality, fabric.

Garbage bags. You do not consider your works as garbage, so do not associate with him the impressions of the buyer when receiving the picture.

Biotech Packages knows a lot about the aging!

A diamond requires an expensive cut. Based on this the couple, we will help to pack the picture in a high-quality and reliable way , so that upon receipt of the parcel the buyer is sure that he is in front of him a real work of art from a capital brush.

We value your creativity and choose a worthy package for your work!

For more information Click the link Packaging companies in Lahore.

[biotechpackages08-blog]

Where the UV Offset Printing Services used?

UV Offset Printing Services is a type of inkjet printing. Its peculiarity lies in the fact that the used paints harden almost instantly under the influence of ultraviolet light. In the printing process, ink polymerizes, and a film forms on the surface of the printed image, which extends the operating life.

Ultraviolet printing allows you to produce attractive banners and posters with high detail and uniform ink distribution. Thanks to the protective film, they retain their aesthetic appearance for a long time even when used outdoors, where they are exposed to dust, sunlight, rainfall. They are also resistant to chemicals. This is a great choice for printing large format banners, posters, posters, posters, etc.

We guarantee the quality and compliance with the terms of the order.

Using special UV Offset Printing Services, inks are even applied to large-format products. In this way, any material can be processed - plastic, wood, metal. The method of large-format UV printing is used for interior decoration of windows, mirrors and even ceilings. The work uses special ink. They are first applied to the surface and then fixed under the influence of UV rays. The image is bright and resistant to mechanical and climatic external factors.

One of the most interesting machines for UV printing (UV printing) was presented - the Mimaki JF1631 plotter with UV lamps ( A0 format plotter or more).

The Mimaki JF1631 printer model is designed for uv printing (uv printing) exclusively on sheet printed materials. It is possible to apply the image simultaneously on several sheets.

The printer is equipped with a special system that allows you to combine the edges of the material. The accuracy of combining the edges of the material can be tracked using the built-in LED printing unit.

The function of self-adjusting guides is provided. The print the t point can be set automatically by entering the coordinates on the plotter display or manually by adjusting the carriage.

Mimaki JF1631 is close to photographic, very high print quality.

The a0 plotter of the JF1631 format allows UV-printing (UV-printing) on a wide variety of sheet media, including Plexiglas, foam, synthetic and wood materials. You can also make UV printing on glass, but at the same time you should use a special primer, otherwise, the image will be sensitive to external adverse factors.

It is not recommended to print on a mirror - the location of the lamps in the plotter is such that UV rays, reflected from a transparent mirror surface, fall on the print heads. At the same time, ink in nozzles can harden, which will lead to damage to the plotter.

You can create graphics on glass, and without harming the print heads. For this, the image should first be applied to ordinary glass, then put foil on it. In this case, the image will be applied before the mirror is formed.

UV printing of images on metal is also possible. To do this, the metal surface should be coated with a layer of polymer protective material.

Ceramic tiles have a smooth surface, which can also lead to image instability if UV Offset Printing Services are used. The paint will lie perfectly on the ceramic surface, but it will not be scratch resistant. A special primer should be applied to the tile, this will help to avoid increased sensitivity of the image to mechanical stress. Please note that ceramic tiles with this image should be laid exclusively on the wall, but not on the floor.

Manufacturers did not ignore the ability to apply graphic images to textiles, since these are the trends of the modern market - outdoor advertising on fabric materials is required that is resistant to UV and moisture. After crystallization, the ink used in the printer does not lose flexibility, therefore, it does not show up as a result of mechanical and physical influences.

To give the image a finished look and protect it from burnout and rinsing even longer, printing can be done using varnish. Such UV printing can be carried out by two main methods:

The necessary image is applied to the printing material, the ish is applied, and fixation occurs using UV rays.

An image is applied to the material, immediately fixed with UV lamps. Then the lamps are turned off, the ish is applied and again turned on.

During printing, white color can also be used, which often acts as a base or substrate for other colors. White ink can be applied over the entire area of ​​the printed material. When carrying out UV printing in the light, it is better to use white ink on top of a full-color image. White can be applied to individual details of the image.

 For more information Click the link UV Offset Printing Services.

[biotechpackages08-blog]

Custom Medicine Boxes Using Reliable And Durable Material

The rapid development of pharmaceutical marketing in the past decades has made package an important feature of a medicine. The packaging reflects the image of the drug and plays a vital role in brand development, promotion and merchandising in pharmacies. The author of the article highlights the new trends in the pharmaceutical market, such as the growth of the variety of types of Custom Medicine Boxes and the expansion of its function. Today packaging is meant to add new value to the product it contains and therefore requires a separate and valid marketing effort.

For many decades, drug packaging has been considered the least significant element of a pharmaceutical product. First of all, utilitarian requirements were imposed on her - to preserve the quality of the drug, ensure its transportation, inform about its name and dosage. In recent decades, with the rapid development of pharmaceutical marketing, the role of packaging has become increasingly prominent. She became the carrier of the image component, an important part of brand promotion and creation, one of the main fragments of pharmacy merchandising. Currently, there are new trends in the development of a variety of types of packaging of medicinal products and the expansion of their functions. Modern packaging can provide additional value for a medicinal product, moreover,

Specialists mark the marketing value of drug packaging for a long time and constantly. In the choice of a medicinal product among similar ones (and for a layman, it is incomprehensible than the drugs differing from each other), the impression that the appearance of the package makes is significant. It’s the same as if a novice in this business chose, for example, deep-frozen vegetables in a supermarket: he knows that a vegetable mixture is needed, and there are a lot of them, so he will choose the one that will like the picture more. Also, people choose OTC drugs in a pharmacy, for example, multivitamins, colds, etc. So, in one study, it was shown that

First of all, this, of course, the brightness of the design. Over the past two decades, experts say, there has been a transition from 2-color printing of consumer packaging to multi-color (even for prescription drug packaging). Today, many industries use 8-color printing, which makes packaging multicolor, bright, deep in color and elegant in color transitions. Often used "ennoblement"

Packages - varnishing, embossing, films, holographic fragments, etc. A case in point of the original color design is the packaging of the revived drug Gramicidin - Grammidin. Custom Medicine Boxes with bright scarves tied with a soft and beautiful knot and immediately creating an image of warmth and coziness cannot be overlooked - this is unusual and attractive, corresponds to the purpose of the drug (“treats a sore throat”), involuntarily causes a smile, so an extremely successful concept! The packaging design was supported in an advertising campaign that used the images of famous people, “tying” scarves to them. I must say that bright, beautiful packaging is often used in modular advertising when promoting over-the-counter medicines. There are successful examples when advertising creates a clear emotional image and the legend of the drug, organically weaving the packaging into it as the main character. There is no doubt that when it comes to choosing a drug, more or less clear associations with the advertising image will emerge from the depths of memory and the consumer will recognize the familiar packaging among others.

For more information Click the link Custom Medicine Boxes.

[biotechpackages08-blog]

The power of packaging companies in Lahore

Today more than ever, the role of Packaging companies in Lahore in the success of a brand is becoming more important. According to a recent survey among BRAND Packaging readers, companies plan to invest more in packaging design, materials, and marketing this calendar year. We invite you to familiarize yourself with the “Report on the Status of the Packaging Industry in 2019”.

The results of this survey also included answers received from experienced professionals holding senior positions in various packaging companies. 76% of the survey participants have more than 10 years of experience in the packaging industry, namely in the following areas: development (29%); design (22%); corporate governance (20%); sales and marketing (14%); engineering (4%); logistics (4%) and production (2%). The vast majority of respondents (84%) believe that over the past two years, the role of packaging in brand building has increased markedly. Compared to last year, this indicator grew by 15%, which once again confirms the importance of packaging when creating a brand, strengthening its position in the market and introducing it to consumers.

New technologies and competitive advantage

Survey participants believe that product innovations and the timing of their launch on the market are two main factors that give companies a competitive advantage. Moreover, new technologies have their influence on every factor. In particular, the use of 3D printing is referred to as an innovation that allows for more design options and faster manufacturing results.

“We have a small private company. New technologies give us more opportunities in the development of packaging design and reduce labor costs, ”says one participant in the survey. “3D printing technology allows us to quickly create layouts,” confirms another. Another respondent notes: “[Using 3D printing] we can create more complex design options and use effects such as foiling, embossing and heat shrink.”

 Overcoming difficulties and finding new opportunities

Despite all the advantages provided by packaging manufacturers using new technologies, there are still a number of certain difficulties in the production of packaging. Along with the increase in prices for packaging materials, the survey participants are also concerned about the creation of an original packaging design. Many respondents note that it is difficult for them to come up with a design that would be not only unique, but also emotionally close to their consumers.

 Material for the manufacture of packaging: cardboard is still beyond competition

Cardboard and corrugated cardboard are still leaders in packaging materials. Their share in volume and frequency of use is 49%. Compared to last year, this figure increased by 10%. This growth is most likely due to the growing need for manufacturers and consumers to use biodegradable packaging materials. Thermoformed plastic products and flexible packaging received an equal number of votes during the survey. These are the next most commonly used materials. Glass and metal received the least number of votes. They are least used for packaging.

So, as you can see, some trends in the Packaging companies in Lahore  cannot be called new, others are only gaining in popularity. In any case, we are sure that in this report there is enough information that is worth paying attention to and taking into account. One thing remains unchanged - the opinion of the end users. Indeed, in the end, all these studies, surveys and reports are done precisely for them.

For more information Click the link Packaging companies in Lahore.

[biotechpackages08-blog]

UV OFFSET PRINTING SERVICES. COMPARISON OF BENEFITS.

The differences between them are in the materials used because the equipment used is one and the same. Another commonly used type of printing is UV Offset Printing Services. To understand their properties and differences, it is necessary to dwell on each variety in more detail.

 Ultraviolet (UV) printing

This is a type of inkjet printing, implying the use of ink curing under UV radiation. As a result, a film coating is formed on the material on which it is applied. This technique is widely used in the production of promotional products. For example, banners, posters, posters. Drawing the image can be carried out on almost any basis, but its preliminary processing is required. For this, solutions are used in order to achieve better adhesion.

Ultraviolet printing developed for a long time, for this she needed to “go through” several difficult stages. The first inkjet printer appeared in 2000. The ultraviolet lamps of those times that were used for printing were not of very good quality. However, modern LEDs have a high value of efficiency, long life, nd affordable cost.

 Advantages and disadvantages of UV printing

If we talk about the basic characteristics of this type of application of texts and images, the following points can be noted.

 Ink. They are saturated and resistant to water and other chemicals. Images are durable. Ink quality allows you to choose the basis of any material.

Convenience. There is no evaporating element in such materials. In this regard, they quickly harden when applied to paper and do not dry out while in the printer. The ink preparation time is minimal, because they do not need to be dissolved.

Ecology. Powerful drying provokes the release of ozone, which is harmful to health. Therefore, the allation of ozone filtering devices will be required.

The basis. Their range is practically unlimited. For example, you can choose media from paper, polymers, textiles, fiberglass, metal, wood, PVC.

Cost. UV Offset Printing Services is not cheap. The price depends on the technical parameters of the material to be printed, as well as on the degree of processing and volume. But the finished product has a low cost and is of high quality.

Interior print

This is a type of large format printing intended for indoor use. It must meet a huge number of requirements for color rendering and resolution. The fact is that, while indoors, the viewer looks at the images from a short distance and can notice all the errors. For the image to be visually pleasing, the use of a plotter is required. In this case, you can use materials that are soluble in water, oil substances, ultraviolet, solvent. Self-adhesive film, photo paper, banner cloth, poster paper, and canvas are often used.

This type of application of texts and images is used in commercial premises (shopping centers and halls), offices, exhibition complexes, residential buildings and apartments. As in the case of UV printing, the choice of materials (bases) is not limited here. An impressive range is the ink used. Interior wide format printing with proper selection of the base and ink is of high quality. The cost of the finished result is also high, but in general it is more profitable in comparison with UV.

Thus, both types of printing have a large number of advantages. UV printing has been gaining more and more popularity recently  , since it is safe, can be used on a large number of materials, including hard sheets, and is economical in terms of material consumption.

 CATEGORIES

Outdoor advertising

About advertising investment

Design and print

Types of promotional items

Useful information

About advertising in construction

About advertising - in plain language

About advertising costs

About the benefits of advertising materials

About materials in production

FIND OUT MORE TO CLICK THE LINK UV OFFSET PRINTING SERVICES

[biotechpackages08-blog]

The Role Of Custom Medicine Boxes In advertising and marketing

If a few decades ago, Custom Medicine Boxes performed solely the function of preserving the drug, preventing its premature spoilage or damage to containers, today it plays an important role in the field of advertising and marketing. A competent and effective design, an extraordinary approach and catchy elements of the box may well serve as the most important tool of the marketing strategy, designed to increase the popularity and demand of the company, as well as directly sold goods.

  The usual, it would seem, packaging of pharmaceuticals can perform a number of the following tasks:

The information on the box on the composition and methods of using the drug greatly facilitates the process of product selection by the consumer, due to the lack of the need to get a special inner liner. A potential buyer has the opportunity to study the composition and decide whether the drug is suitable for him, even before the purchase, that is, at the stage of choice. In general, such an argument speaks exclusively in favor of the manufacturer.

A spectacular package with additional decorative elements or a bright design attracts the attention of potential buyers and provides an opportunity to get acquainted with the manufacturer.

The pharmaceutical market is a kind of field for the struggle of manufacturers that produce products similar in composition and methods of application. To increase the priority of the company, various methods are used, especially important among which is a spectacular appearance and a rational approach to the manufacture of packaging. In most cases, customers purchase the product they like based solely on external product data.

 Pharmaceutical packaging manufacturing

The manufacture of Custom Medicine Boxes, innovative technologies are used to improve the quality and effective appearance of the final product. In general, in the manufacture of such products, the following apply:

Lamination The process is represented by applying a thin film to a cardboard base. This method can significantly increase the strength of the box, preventing its damage under the influence of negative external factors.

Die-cutting. This method is more often used for the manufacture of souvenir products, but it is also relevant in the manufacture of medicine packaging. The method is based on cutting down individual elements located on the surface of the box.

Varnishing. Application of special varnish to separate areas of the image, which gives the product an even glossy shine.

Embossing. In the framework of this method, the contours or individual sections of the image are pressed in, followed by foil or a special decorative film.

Each of these options for printing technology can improve the appearance of the product and, accordingly, attract the attention of potential customers.

  Our services

Printing house "Ukraine" specializes in the manufacture of various types of packaging of drugs. In the framework of mutually beneficial cooperation, we offer customers the following:

Compliance of the raw materials used with the standards and quality requirements. For the manufacture of cardboard boxes, we use only the best raw materials, which ensures a spectacular appearance of the product, resistance to the negative effects of external factors, maximum safety of the products sold, presented in this case with medicines.

In our work, we use the drug packaging design created by the client, our technologies make it possible to realize any, even the most innovative and daring solutions. In the absence of a client's project, we are pleased to offer the services of professional designers who will help to create a packaging design in accordance with the characteristics of the products and the activities of the manufacturer.

We competently combine the concepts of quality and value. We use only the latest modern technology to create packaging with the highest quality indicators.

The manufacturing process of consumer drug packaging implies maximum responsibility on our part. We comply with technological requirements at every stage of packaging creation, which provides the opportunity to obtain quality products. The packaging created in our printing house can be used not only as information media but also as an effective advertising tool, which can increase the level of popularity of the manufacturer and the product itself. We practice an individual approach to each client, which provides the opportunity to obtain the best result of collaboration.

For more information Click the link Custom Medicine Boxes.

[biotechpackages08-blog]

Custom Pharmaceutical Packaging Boxes for Medical Industry

Custom Pharmaceutical Packaging Boxes is a cardboard box, the functional tasks of which include protecting the drug from the negative effects of external factors, including moisture, light, and mechanical damage. In addition, the packaging of such a plan provides the opportunity to post information on the composition of the goods, recommendations for its use, as well as advertising. The process of manufacturing and packaging of drugs is especially difficult, as it involves a combination of maximum information content and small size. Of particular importance is the compliance of the technologies and the process of creating boxes with sanitary and hygienic standards, because it is particularly high demands are placed on pharmaceutical packaging.

  Features of pharmaceutical packaging

The production of packaging for pharmaceutical and medical products occupy a special niche in the production of printed materials. The creation of boxes designed for transportation and subsequent storage of drugs involves strict adherence to a number of rules and requirements. Among the features that significantly distinguish pharmaceutical packaging from a number of others are the following:

The modern pharmaceutical market is represented by a wide range of names of drugs having similar composition, identical chemical properties and pharmacological actions, but different costs. Directly the final price of medicines is often determined by the level of popularity of the manufacturer and, accordingly, the quality and appearance of the package. Often, drugs with similar composition are presented in completely separate price segments only because of the difference between the boxes and manufacturers.

Packaging of pharmaceutical products, in contrast to conventional printed products, is made taking into account the requirements of sanitary and hygienic standards. This is due to the specificity of the products, the safety of which is ensured by a cardboard box.

The packaging for medicines is small, but it requires the application of a significant amount of information, including recommendations for the use of the drug, the composition of the medication, as well as the details and contact details of the manufacturer. Particularly important is the last point, which provides the consumer with the opportunity to choose the goods of a particular company if, for example, the products sold by this company are of a high level of quality or for other reasons.

The manufacturing process for Custom Pharmaceutical Packaging Boxes and medical products involve the use of a wide range of printing technologies, among which, in addition to the main offset printing, additional ones are also used, for example, varnishing, embossing, laminating and several others. This is due to the ability to give the box the most effective appearance, it is advantageous to distinguish it from other drugs of similar purpose and, accordingly, increase the level of sales and popularity of the manufacturer.

Pharmaceutical packaging is an important and competitive element of marketing. A competent approach to creating boxes of this kind can significantly increase the level of popularity of a company that manufactures drugs, as well as directly specific medication.

 Advantages and disadvantages of drug packaging

Packaging of drugs, as well as any other printed products, has a number of advantages and disadvantages. As the advantages of cardboard boxes in front of plastic or other versions of analogs, a number of the following can be distinguished:

cardboard packaging used for storing medicines meets environmental safety requirements. Raw materials quickly decompose, eliminating the possibility of harming the environment, and can also be used as part of recycling;

the technologies used in the manufacture of cardboard boxes for drugs provide the material with a maximum level of resistance to negative external factors, such as, for example, direct sunlight, moisture, mechanical damage;

the material for packaging drugs does not contain toxic substances eliminate the presence of extraneous odors, including paints and other integral elements of printing, due to the specifics of pharmaceutical products.

As for the minor flaws of the cardboard packaging, the following can be cited as such:

the box used for storing glass containers provides a low level of protection and can be damaged by strong external mechanical stress. However, in such cases, the likelihood of causing damage to an external nature is artificially reduced due to the inscription on the box warning about the fragility of the contents;

due to the small size, the packaging of medical goods can not always accommodate a large amount of information regarding a medicinal product, its composition, and recommendations for use, which creates the need for an additional insert.

In general, pharmaceutical packaging has a relatively high level of strength, the ability to accommodate large amounts of information and a spectacular appearance. Cardboard boxes, subject to a competent approach to their creation, ensure the popularity of the product among consumers, attracting the attention of potential buyers.

Find more to Click the link Custom Pharmaceutical Packaging Boxes.

[biotechpackages08-blog]

The Secret Of Quality Packaging By The Pakistan Best Packaging Company

A distinctive tendency of recent times is the desire to minimize the cost of production. More and more sales go through network retailers. Increasingly stringent conditions apply to delivery times, product quality and price. According to statistics of the Pakistan Best Packaging company, product packaging makes up from 3% to 70% of the cost of production, and savings on product packaging can bring significant results.

 The concept of “cheap packaging” consist of. If due to low prices, your packer lets you down and you are fined different companies for a thousand rupees, this is definitely not a cheap package of goods. Or, for example, the Client makes a promotion. A small vial is attached to two bottles. All this is pushed back into the same corrugated box and AUCHAN returns the goods due to deformed boxes. Saving on a new corrugated box does not cover even a tenth of the loss. Or, for example, notebooks for Metro are packed in cheap shrink film. Goods nightstands at the gates of METRO. The next morning, upon receipt, it turns out that the film leaves the notebook with rags because it does not have frost resistance. When packaging washing powders on a pallet, due to changes in the number of boxes in the group packaging of the product, the styling scheme changes. Outwardly it seems that the goods on the pallet are quite stable. However, during transportation, the packaging layers are shifted, the packaging of the goods is deformed, and the machine with the goods can be sent back for repacking. And if the barcode is not readable on the pasted labels, then the whole product must be re-marked again, while the delivery had to be done yesterday?

 Myth number 1. In negotiations with the packaging company, relying on a big name, large volumes and “negotiation skills”, it is necessary to lower the price to an extremely low level.

This invariably leads to a deterioration in the quality of Pakistan Best Packaging Company materials, the quality of the packaging of goods. Such a client becomes secondary and work is carried out on a residual basis. As a result, the terms begin to break down and the volume decreases. When the packaging company gains enough customers to load its capacities, the question of raising prices will arise by itself.

Myth number 2. It is necessary to divide the volume into 2-3 packaging companies and constantly look for new partners.

Firstly, by reducing the volume, the client loses attractiveness for the packer. Secondly, it takes from 2 hours to a month to develop the most economical product packaging technology. And if the process is time-consuming and consists mainly of manual labor, then a small amount will not pay off the costs of optimizing the packaging process.

 Myth number 3. It is cheaper to develop a design and technology for packaging goods in one place (maybe even on their own), order packaging materials in another, and pack the goods in third place.

A common misconception that looks like a roulette game. A beautiful idea is often not feasible in practice due to unaccounted for nuances. For example, often the packaging of goods (box for example), made by the client independently or on the side, turned out to be low-tech for the process of packaging the goods. And this increased the cost of the work performed because the more time the worker will spend and the greater the share of his salary in the cost of packaging. If you lose, you return the package at the price of waste.

Myth number 4. In the regions, the packaging is cheaper.

In the regions, only labor is cheaper. But professionalism, appropriate equipment, and high quality there is not a frequent occurrence. If this is multiplied by transportation costs and the difficulty of operational control, the final price can be much higher.

 Myth number 5. Cheap packaging and materials will make packaging cheaper.

There are no miracles. Firstly, low prices may be due to low quality. There was a case when a customer, not understanding the quality of the film, bought a film thinner than was necessary to ensure the strength of the package. Most of the packaged products went into marriage due to the fact that the customer was not satisfied with the quality of the Pakistan Best Packaging Company and the film had to be purchased again. A simple consultation with us could prevent this problem. Secondly, the packaging of the goods should be technologically advanced, that is, the process of packaging the product itself should not be time-consuming. And again, the tales from the packaging workshop ... Before contacting us, the client ordered the boxes at the printing house very cheaply. Then he began to look for who would put the goods in the box and went out to us. During the execution of the order, it turned out that the assembly of the box is a time-consuming process, and the box volume does not correspond to the necessary one. As a result, the weight of the products in the box had to be reduced, and even the cost of work increased. How else? The package price includes not only the cost of materials but also the salary of workers. The less time it takes to make a finished unit, the cheaper it is.

So to summarize. Cheap packaging is:

Packaging from materials that will ensure the integrity of the packaging throughout the path of the goods to the final consumer.

Technological packaging facilitates the packaging process itself, minimizing its complexity and therefore cost.

Operational packaging does not allow the goods to hang at the packaging stage and bring additional storage costs, and also reduce the risk of delivery disruption.

To reduce the risk, contract packaging companies that have experience in the type of packaging that you intend to use.

Your participation throughout the entire packaging process, from design selection to quality control. Choose collaborators that are open to collaboration to reduce costs at every step of the packaging process.

Packaging has long become a separate industry with its equipment, specialists and its own specifics. Does this mean that it’s better not to meddle there? The Pakistan proverb says, "Without knowing the ford, do not get into the water." Biotech Packages is ready to be your guide in this sea of ​​packaging. Together with our specialists, you will not only easily figure out which package is best suited, but also enjoy this exciting process of joint creativity. You can really affect the appearance, packaging price, quality, and timing.

Click the link Pakistan Best Packaging Company for more information.

[biotechpackages08-blog]

Printing Methods Of  Offset Printing Services in Lahore

One of the most common printing methods is offset. Printing catalogs of advertising booklets, books, newspapers, packaging, and other printed products in medium and large print runs would be very expensive without using this method from Offset Printing Services in Lahore. If you need to print brochures in large print runs, this technology is also used. Why is offset cheaper than other technologies? There are many reasons for this, the main ones are very high speed, the ability to use inexpensive types of paper, and the reduction in the cost of one copy. products with an increase in circulation.

 Technology

Offset printing is a method of transferring images from a metal plate to paper by means of an additional rubber cylinder.

Offset printing forms are displayed using one of the technologies: computer to film or computer to plate (ctp). Nowadays, the most widely used technology is CTP: computer - printed form. The creation of printing forms is as follows: the electronic layout received from the customer (pdf, ps) is prepress, color separation, descent, setting marks for trimming and color scales, valves, etc. Then a file representing an image for a full-size printed sheet sent for screening in the RIP and then to the output device CTP, where the image is exposed to the plate. As a result, after additional processing, plates are obtained on which the blank elements are hydrophilic and repel oily liquids (ink), and printed ones are hydrophobic and accept ink.

Printing can be approximately described as follows: the plates are fixed on a plate cylinder, during one rotation cycle it is moistened, then it receives paint from a colorful roller. From the form, the paint immediately goes to the offset cylinder, and from it to the paper. The resulting print is sent for calculation or for cutting and folding if these operations are provided for by the design of the printing machine.

 Main types and application

There are different classifications of offset printing. For example, traditional and dry offset.

Offset Printing Services in Lahore using a moisturizing the solution to wet the blank elements of the plate is called traditional.

Dry offset is a technology in which a special silicone layer is applied to blank elements. This printing method is inconvenient in that the consumables for it are of the high cost.

Another classification is sheet and web offset.

 Sheet offset, as the name implies, involves the use of paper in sheets. Cretaceous for sheet offset, as a rule, is sold in sheets of different formats, and offset printing paper is bought by large printing houses in rolls to save money, and then they are unwound and cut to the format required for sheet printing. Printing color advertising booklets, catalogs, brochures on thick paper in medium runs is advantageous on sheet-fed offset.

Roll machines print on paper from a roll. Also, roll printing differs from sheet printing by passing the material through the printing sections, by a long adjustment, by a large amount of paper onto the adjustment, by a long change-over from the format, to format. Creation of brochures and books in large quantities on cheaper paper (newspaper, offset paper up to about 120 g / m2) is convenient and economical on a roll press. Another distinctive feature of the rolling machine is the ability to connect other equipment to the line, for example for folding and cutting, which is very convenient when creating brochures and books.

Materials used

One of the important advantages of offset printing is the ability to use a wide range of materials, starting from a simple newspaper, ending with coated large-weight papers.

When creating brochures and books, for example, newsprint from 45 g / m2 and high-quality chalk with a mass of about 115 g / m2 can be used, it all depends on the purpose and design of the publication. Also important for the choice of materials is the technological capabilities of the printing house for further processing of prints. So, if the printing press of the printing house allows you to print a brochure on a chalk 150 g / m2, this does not mean that the seamless glue line can glue the block of the declared volume.

The coated paper of approximately 135-250 g / m2 is used to print the booklet on an offset machine.

In general, offset provides a lot of opportunities for the production of printing products of any type and the task of the printing the manager is to choose an offset printing company, the equipment of which has the appropriate characteristics (format, the ability to use materials, and color) for making an order.

For more information Click the link Offset Printing Services in Lahore.

[biotechpackages08-blog]

What Can The UV Offset Printing Services Offer? | Biotech Packages

All companies try to improve their business through investments. This is, of course, the same in the printing and packaging industry where competition is fierce and offering the best products with excellent service is vital.

A recent survey conducted via the Print Monthly website asks printers what printing technology would be available for their next business investment. Almost 60% of the respondents voted that they would invest in offset litho printers as a way to continue doing business for UV Offset Printing Services. Printers know that this investment is costly and time-consuming since most new presses cost more than a million capital. This investment has the major advantages of improving the effectiveness of operations, improving quality, broadening the product portfolio while reducing overhead costs.

 There is an alternative to this investment ...

UV systems that are subsequently applied to presses offer comparable advantages as printers for a fraction of the cost. UV technology is not new, the technology has been around since the 1960s, by adjusting the time and becoming more effective with the introduction of eco-UV (low-energy light bulbs) and LED-UV.

The market for faster lead times for print jobs is growing. UV offers the tools to give companies an important opportunity to compete in this market. From the customer's requirements in faster lead time, you must have tools to provide this. Some printers have invested in digital printers to meet this demand. They achieve a faster lead time, but at higher costs for printing and a decrease in quality.

 So what are the general benefits of a UV system?

 1. Save time and money

With UV printing you save time and money in various areas - everything from manpower to resource savings. Inks are dried immediately, so no additional drying equipment is needed and the work can be sent immediately.

2. Faster lead time

Ready will be faster and also colors. Because the substrates are dry as soon as they come off the press, there is no need to wait until they are finished - even for materials that are traditionally difficult to cure.

3. More options

Due to the immediate drying, you can use many different substrates, such as uncoated stock, plastic films, foils and metalized paper, some of which are difficult to handle on a "conventional" press. Special effects can also be achieved more easily. LED UV systems offer less heat emission compared to their counterparts of mercury lamps, which means that heat-sensitive substrates and uncoated materials can be processed.

4. Save energy

You will notice that you use considerably less power consumption than other drying systems such as IR because the lamps require less energy, which reduces the energy bill. In addition, LED system technology offers even greater energy savings and has lamps with a longer lifespan than their mercury counterparts.

5. Better quality

The use of UV-reactive inks provides an output that is usually superior when it comes to rub and scratch resistance.

6. UV inks require less washing up

Operating on a conventional press, printers must do the dishes every day to prevent the ink on the rollers from drying out. Because UV inks only dry through a photochemical reaction, the press stays cleaner and washing is required once a week, saving time and resources.

For more information Click the link UV Offset Printing Services

[biotechpackages08-blog]

New Technologies Every Custom Pharmaceutical Packaging Boxes Companies Should Consider

Nowadays, Custom Pharmaceutical Packaging Boxes companies are experiencing large market growth. Worldwide the market reaches a compound annual growth rate (CAGR) of 6.5% per year and the market is witnessing particularly quickly in the BRIC countries and throughout Asia. In view of this rapid rise, financial experts claim that the market may be worth $ 80 billion by 2020.

We live in an age where healthcare systems must cater to an aging population with increasing incidents of chronic diseases. It is, therefore, no wonder that the need for pharmaceutical companies (and packaging solutions) is always high.

On the other hand, the pharmaceutical packaging industry itself is undergoing a change. Consumers' needs are constantly evolving, pressure on costs is increasing, safety regulations are becoming stricter each year and manufacturers face the challenge of finding new and creative solutions to various urgent problems. That is why evolution is crucial to reach the ultimate goal: to offer patients high-quality services while keeping costs low.

 The dream of every pharmaceutical packaging company: full serialization

New serialization technologies are introduced to the market every year, proving that even today, serialization is still one of the driving forces behind the changing Custom Pharmaceutical Packaging Boxes industry.

In recent years, Japanese pharmaceutical packaging companies have applied one of the most exciting new technologies to date on a large scale: 2D barcode printing directly into vials, pills, and capsules. It seems that this trend is also catching on in America lately.

Putting serialization directly on pills brings a new problem. Is the technology ready to read and interpret smaller prints? Although bar code reading technology is not very well developed, we are likely to witness new devices in the coming years to interpret and follow these microscopic serialized codes.

The GlobalVision barcode inspection tool is one of the few quality control software tools that can automatically locate and rank all barcode types without actually having to print them - eliminating the need to authenticate with a device.

Biological medicines force pharmaceutical packaging changes

Biological drugs, such as vaccines, antibodies, and interleukins differ greatly from conventional small molecule formulations because their structure resembles substances made by living organisms. Over the past decade, we have seen new treatments for cancer increasingly shift to bio drugs, but treatments for other diseases also cross.

This increasing popularity continues to cause unexpected changes in pharmaceutical packaging due to drug interactions with packaging materials, leading to an increased demand for new formats and materials.

A glass container that undergoes a serious change is the glass vial. Some new biological drugs have been found to delaminate glass, resulting in unwanted glass exfoliation in solutions. Manufacturers around the world are now looking for a way to change the way bottles are made to reduce unwanted delamination effects.

Another medical device that is thoroughly examined is a pre-filled syringe. Some new biological drugs have reacted to components used in the production of syringes, often causing protein denaturation and hence aggregation of their active substances.

Materials such as silicone oil (used for lubricating spray pistons) or tungsten (used to form the glass spray tip) are linked to causing these reactions. The industry is now looking for a way to develop new silicone and tungsten-free syringes.

 Human versus automated pharmaceutical packaging

The ever-present demand for human versus automated quality control for pharmaceutical packaging still makes content for countless blogs on the internet. Sufficient time and research, however, have concluded that automation is the largest and most valuable investment that your company could make.

Monotonous and repetitive tasks are not the best jobs for people, especially when accuracy is extremely important. Human errors are undoubtedly the first cause of labeling problems, resulting in full recall actions. Automatic verification software solutions are required to achieve absolute accuracy.

For more information Click the link Custom Pharmaceutical Packaging Boxes

[biotechpackages08-blog]

Challenges For  Packaging Companies In Lahore | Biotech Packages

The Packaging Companies in Lahore are evolving rapidly. It has great growth potential. But at the same time, manufacturers of packaging boxes face enormous challenges. Whether you are in retail or shipping, these challenges are needed to ensure your existence. The problems can vary in size, specifications, and urgency, but they are more or less the same at different custom packaging companies. Meeting these challenges and achieving one of the best solutions can ensure healthy business operations. Below are some of these challenges:

 Increase the stacking strength for packaging:

The size of the packaging strength is a common question in the minds of customers. Although Packaging companies in Lahore do their best to design the customized boxes effectively, some problems can be incorporated during the process. One of the biggest challenges is ensuring the safety of packaging during the transition. The wholesale boxes are often distorted during stacking. The distortion of PET bottles and customized boxes for products is a common problem for companies. The designers have proposed various solutions to increase the stacking strength of packaging. The structure and operational changes in the packaging process can solve the problem. Or making useful design changes can be a final answer.

 Minimize the transport and delivery costs of the packaging:

Reducing costs is related to increased margins that can lead to more profit. Profitability results in the growth of the company. This makes manufacturers think about how to optimize packaging costs. Transport and delivery are important points of interest for Packaging companies in Lahore that are difficult to ignore. Whether you want to deliver product package boxes or custom-made shipping boxes, costs must be minimized in every possible way. This is a major challenge for manufacturers. The only way to tackle this problem is to take your packaging methods into account. The use of a modified cardboard box with the least amount of fill packaging is an effective solution in this regard. It lowers dimensional shipping costs and is cost-effective for both companies and customers.

 Develop environmentally friendly and recyclable packaging:

With the increasing concern about the environment, another challenge is for companies to use sustainable packaging methods. Designing customized packaging boxes with recyclable material is beneficial for both the environment and your company. It not only improves your brand image but reduces your costs to a significant level. The packaging of the color box fused with laminate or other non-recyclable material must be avoided. The government and health authorities are constantly raising their voice to reduce the packaging waste that ends up in landfills. The use of non-recyclable materials such as metal cans, plastic packaging, polyethylene, and PET bottles must be avoided. The only way to meet this challenge is to switch to green packaging methods.

 Distinguish your products by packaging:

Differentiating your products is a basic requirement for every company. In this competitive market, it has become a diverse challenge for printing and packaging companies. The best way to do this is to use custom boxes in bulk. The companies do not have to spend an incredible amount of time and resources on it. With the help of little creativity, you can distinguish your brand on the market. Use your logo effectively to design the product packaging. This ensures more recognition of your brand. A customized shipping box with a logo can make your shipment stand out. Printing on cardboard boxes with unique patterns and designs plays an important role in distinguishing your products.

 Tune in to innovative changes:

The packaging industry is full of innovative challenges. If one of its sectors undergoes some technological progress, the tide often goes further. Especially in the case of retail and FMCG packaging, the changes are implemented very quickly. The traditional box packaging has, for example, been replaced by flip-top boxes with magnetic locking. The industry is striving hard to work on plastic-free packaging. Another change in recent decades is the automation of packaging processes. Most tasks are performed by machines and robots. This has reduced human dependence and increased the efficiency of the process. Coordination with these innovative changes is one of the biggest challenges for the wholesale of packaging.

For more information Click the link Packaging Companies in Lahore

[biotechpackages08-blog]

How Offset Printing Services in Lahore Change The Face Of Packaging

The wonders of packaging are not hidden from the world, but every packaging is not an effective packaging that is expected to impress customers is like us Offset Printing Services in Lahore

Together with the other factors, printing is one of the most important factors that determine the quality of customized product packaging.

Customized packaging boxes

Starting with the imprint on the clay, the printing has revolutionized the most advanced techniques and technologies such as inkjet, screen printing and laser printing, but digital printing is the one that is proven to be the game-changer.

 Offset Printing

Offset Printing  is a process whereby images are printed directly on different media substrates, such as fabrics, paper, plastics and canvas, etc.

Offset Printing  does not require printing plates for transferring the image to the material.

Benefits of Offset printing

advantages of Offset Printing

 Offset Printing  technology is evolving with the passage of time because of the benefits it offers to customers and businesses, such as;

Quality

Print variable data

Cost efficient

Fast process

Branding!

Branding with digital printing

It is an identity that companies need to be recognized and create a difference in the market between other similar brands and customized packaging boxes with logo is the best choice through Offset Printing Services in Lahore. It gives customers a better understanding of who you are, just as getting to know a person becomes easy when we know their name.

Digital printing gives the best printing options to the companies where they can get their logo in the desired color and typography.

 Printing for everyone!

It doesn't matter if you run a small company or a large, sturdy, customized packaging helps with brand recognition and who doesn't want attractive boxes for their products.

Progress in the packaging industry has increased competition to maintain the appearance of the packaging. Tailor-made packaging for small businesses is more important because they need exposure to reach the target audience.

 Eternal impression

There is no better way to make an eternal impression than to make a package that shows the full potential of the brand that ordinary boxes cannot. Combination of different adaptation techniques together with digital printing, you can make a number of amazing product packaging boxes that are unmatched in appearance.

This allows you to better represent your product and brand with designs related to your business and the product you use, if before.

Premium colors

Have you ever thought about getting luxury with printing?

premium colors in packaging boxes

 Well, Offset printing has made it possible to achieve the highest quality with printing.

Color box packaging was not available a few years ago, at least in the form it is today, premium and pigmented. The latest printing technology offers clear, vivid and accurate colors for prints that improve the quality of the boxes, as opposed to boring prints that significantly reduce the quality.

 Quick and easy

Custom packaging was not easily achievable because there were no good and effective means to get the prints worth something. The evolution of printing technology has given companies tremendous opportunities to create a difference as easily and quickly as possible like Offset Printing Services in Lahore

Digital printing takes less time and effort to print, unlike other printing techniques, making it easy and feasible for everyone to get their customized product packaging that represents them.

 Variety of materials

The most amazing thing about this printing technique is that it is not limited to one specific print material. Where it was impossible to get cheap custom boxes in desired designs, shapes and sizes, offset printing has made it possible to get the desired prints on a variety of materials such as paper, cardboard, fabric, synthetic or canvas that all packaging and marketing fulfills materials.

You can easily make packaging from boxes for beauty products to pharmaceutical, food, clothing and other packaging boxes.

 Cost efficient

All luxury things do not come with a good price, just like offset printing. There are many companies that offer packaging for wholesale. They offer complete control over the packaging boxes, from the choice of materials to the shapes, sizes and print designs.

Quality is important in determining the fate of the product and brand, because this is the only thing that a customer sees and high-quality, dense colors, prints, designs and information for a more professional and premium look. The wisest choice is to get product boxes in wholesale, because they are just as sustainable, durable and attractive.

Click the link Offset Printing Services in Lahore for more details.

[biotechpackages08-blog]

Biotech The Pakistan Best Packaging Company Communicates Many Things to Customers

It does not matter whether items are rich or expensive; Correct product packaging is the basic requirement of every industry Like Biotech Packages The Pakistan Best Packaging Company. If the items are not properly packaged, they are vulnerable to damage or loss due to the dangers of the external environment. Other than that, containers with objects also play an extremely important role in attracting attention and making the product more acceptable to the masses. These coverings can be purchased on the market in various shapes and sizes. Numerous customization options to change their style, colors, designs, and overall appearance can be applied to make them look beautiful and attractive for observers. This packaging is considered to be the face of the entire brand or the entire organization. That is why coverage is called a brand or break situation for the brand. It communicates many things to the customers. Some of them are described below.

 Exhibition of technology:

The way an object is packaged and presented to customers is an exhibition of technology with which the company is equipped. It is because the results of modern technologies are much better than old and orthodox methods. For example, if a QR code is printed on the product boxes, it shows that the organization has the latest technologies to implement this latest and an innovative way of printing as same as Biotech Packages The Pakistan Best Packaging Company  Similarly, the presence of images and images on the modified product boxes is an expression of the technologies owned by the company. That is why the packaging of the product boxes clearly show the methods and innovative approach from the company to the target group.

 The priority of the company:

There are two main functions of product packaging boxes. The first is to offer items safety and security, while the second is to make them attractive to the observers. Both aspects cannot be added to the containers at the same time with the same capacity and usually, one of the factors must be endangered for the others. That factor that is made prominent is expressed in the packaging, and in this way, the priority of the organization can be estimated. For example, if simple and simple cardboard product boxes are used, this indicates that the main priority of the company is to ensure the protection of items similar to Biotech Packages The  Pakistan Best Packaging Company On the other hand when boxes of design are introduced, this shows that retailers' main focus is to increase the display value of goods. The retailers can purchase packaging boxes from a number of production companies that are active in the market. A number of ideas for box packaging can be realized with the help of modern technologies. Auto lockboxes are used for those products that have to be transported from one place to another and that are prone to slipping out of the covers. Similarly, a handle box can also be used to help users carry their required products from one location to another. All of these distinctive styles of coverings convey the message of the company to the customers and display its priorities.

Defines the demographics:

Each company offers different types of products that are specifically prepared for a certain class of people. This demography of the brand can be communicated to the target group using the coverage of the products. For example, if the goods are intended to be presented to young people, packaging in color boxes is preferred. This is because the packaging is always designed and manufactured by keeping the consumer in mind through us Pakistan Best Packaging Company. On the other hand, if the items are from older people, simple, simple and austere packaging is preferable. In this way, the demographics of the brand can be estimated from the containers.

 Determines the strategy of the brand:

It is rightly said that business is not just business; it is rather the strategy and philosophy of the owners. They usually buy cardboard boxes online that are delivered to the customer's specified location. The business communities display their strategy on the packaging in a detailed form or simply by printing the specific slogan of the organization on the product packaging. This slogan shows what the brand wants to achieve and how. Short and catchy sentences are generally preferred because of a lack of space. In addition, the link from the official website can also stick to the containers that can be visited by customers at any time. All details of products, services and marketing.

 Click the link Pakistan Best Packaging Company

[biotechpackages08-blog]

Custom Medicine  Boxes Are The Best For New Start-up

There was a time when the use of simple and simple covers was considered good enough for the task because the primary purpose of covering products was to protect them from possible damage. But over time, competition between different new and old brands reached the next level, and now they are doing their utmost to overthrow the others and make a mark on the market by presenting their products with dignity. The most convenient way to do this is to use Custom Medicine Boxes and make the items stand out in the crowd. These containers are accurately manufactured using modern and high-tech printing technologies. They can be shaded in any desired solo color or a combination of colors. Apart from shading, these covers can also be used to provide useful information to customers and to facilitate a quick and correct choice.

 Importance for new companies:

When a business is started, the first important goal of owners is to make an impression on the market by creating recognition of the brand or organization. This aspect is vital because there are a large number of companies active on the market and they are all looking for ways to conquer the industry. It is certainly not possible to achieve this goal if the companies adhere to orthodox and traditional methods for presenting products. On the other hand, if a printed box is used creatively, the new organizations can thrive for various reasons, as described below.

 Improves the display of products:

Buyers are given countless options at this age to purchase their products due to the establishment of a large number of brands in the market. Suppose that if all of these items are presented in such a way that they do not have pleasant effects for the observers, how it is even possible to think about making a significant success in the company. This is particularly the case with those industries that have barely started their activities. It is urgent to make such efforts to show items to the target audience in a much better way. It can be done using the Custom Medicine Boxes that are designed in a stylish way. Different unique styles, such as window packaging, the addition of handles, sliding covers, etc. It can be manufactured according to the nature of the products. But these ideas for box packaging make no sense if they are not supplemented with suitable color schemes. The personalized covers can be adjusted to any desired shade to make them suitable for the task. Unlike colors, many creative print patterns can also be drawn to attract and persuade the public to make a purchase.

 Construction brand image:

The brand or company that has recently established itself in the market can only make a significant success if a large number of people are aware of its existence and operation. This brand recognition can be built using the logo of the box. A logo or emblem is considered the symbolic representation of the entire organization. It generates loyalty among consumers. Various adapted packaging companies are active on the market that supplies this type of casing. Unlike the logo, the full brand name can also be printed to make the general public aware. This is because most retail items are brought from one place to another, and so, wherever they go, they also take the name of the company with them.

 Facilitate customers:

The lives of most people have become extremely busy and hectic and they love it when they are provided with methods to facilitate them. This objective can be achieved by obtaining such containers from the manufacturers of Custom Medicine Boxes on which all data required by customers is written in a clear and legible way. This kind of facilitating approach amuses customers, and they greatly appreciate the newly developed organization.

 Increase the reach of the trade:

The customized cardboard box is used by organizations to transport items to large distances. These customized shipping boxes are extremely strong and ensure that items reach the desired destination safely and securely. It is a well-known fact that printing on cardboard boxes is extremely simple and can be done with both old and modern technologies. With the help of a customized shipping box with the logo of the producers, different people will be introduced to the products and services they provide. It is very natural that people prefer well-known brands for long-distance plate trading.

For more information Click the link Custom Medicine Boxes

[biotechpackages08-blog]

Offset Printing Services in Lahore | Bio Tech Packages

Best Offset UV printing by Bio Tech Packaging Lahore. We are providing digital printing services and 4 color offset printing at a very low price. Bio Tech Packaging offer you quality color printing and packaging in lahore.

[biotechpackages08-blog]

Holographic printing Lahore | Bio Tech Packages

Get Customized Holographic Printing from Bio tech Packaging Lahore. We are providing 3d holographoic printing and holographic material Packaging Boxes.