Mini mushroom sewing pattern:
Mini Mushroom Friend Pattern: 1/4" seam allowance is included in the pattern. The dotted line indicates that but is not actually drawn at the 1/4" mark, I just freehanded it (I did measure it on the original pattern)
-cut two (one the reverse of the other) of the body piece
-cut four (two reversed) of the arm patterns, if you are adding arms
-cut four of the mushroom top piece of your choice (tall or dome shaped. These pieces are symmetrical so you don't have to reverse them)
-cut four of the corresponding mushroom cap bottom that goes with the cap shape you chose (these pieces are also symmetrical and do not need to be reversed)
If you are adding arms, take a pair of arm pieces, right side together, and sew aroud the curved outside edge, leaving the short flat section unsewn. Turn right side out through that section and add some stuffing to the "hand" part. Repeat for the second arm
Take the pair of body pieces, put them right sides together, and sew along the curved edges, leaving the short flat section unsewn. Turn right side out through that opening, add some stuffing to the bottom half but leave the top half unstuffed for now
Take a pair of your mushroom cap top pieces, right side together, and sew from the top point to the bottom edge but do not sew along the curved bottom edge. Repeat for the second pair.
Stack the two pairs you just sewed on top of each other, right sides together, making sure the seams align. Sew from one bottom edge, up to the top point, and back down to the other bottom edge. Set this aside for now
Take a pair of your mushroom cap bottom pieces, right side together, and sew from the middle point to the outer edge but do not sew along the curved outer edge. Repeat with the second pair
Stack the two pairs you just sewed on top of each other, right sides together, making sure the seams align. Your opening for turning will be in the middle of this seam; sew the outer edges at least 1/2", but make sure you leave enough in the middle of this seam unsewn so you can turn the mushroom cap right side out later
Take the mushroom cap bottom and put it right side up. Take the mushroom cap top, right side down, and put it on top of the mushroom cap bottom, making sure the curved outer edges line up. Sew along the outer edges, not leaving an opening for turning
Turn right side out, add stuffing, and sew closed the opening for turning
Assembly time! Take your mushroom body and your mushroom cap, and now you are going to experiment with adding more stuffing, tucking the seam allowance at the top of the body in, and cap angles until you find one you like. For now, pin it in place. While it's pinned, add the face (this can be safety eyes, embroidery, applique, whatever you want). The face placement varies wildly depending on preference, height of the mushroom, and arm placement. To aid in face placement, you might want to tuck the top seam allowance of the arms inside them and pin the arms in place as well (again, experiment with placement). Once your mushroom face is complete, sew the cap and body together, and sew on the arms (if using)
Your mushroom friend is complete! If you share a picture on tumblr I'd love to see it if you're willing to tag me or send it to me, but it is in no way a requirement (I understand being shy). Feel free to sell things you make from this pattern as long as you are the one making them, not a factory or anything like that. Enjoy!