When Seawatt was warned about the Fighter level being removed from parkour civilization, and after pleading with his parents to level up with him or level down, to no avail, he turned to the best parkour fighter on the level he could think of; which was AJ. He went to him, warning AJ of what was to come in the next coming days, and that they needed to find a way to save their level.
But AJ refused to help. All he saw in Seawatt’s desperation was potential for total power over Parkour Civilization, as well as the perfect opportunity to cut off and separate the weaker parkour noobs and pros from the masters.
Eventually, Seawatt gave up trying to convince AJ to do something, it was his last effort to save his home level, and it failed. He left shortly after to level up himself to a Parkour Master; and wasn’t surprised to see that AJ had levelled up as well.
(I like to think AJ retained his memory of the fighter level because no one else would remember that AJ was from a lower level and, in the second parkour civilization movie, Seawatt says “I might be the only one alive who remembers when this level was still apart of parkour civilization…” [1:00:50] and I like to see that as a hint that AJ was the other person, but he’s dead at that point so now it’s only Seawatt who remembers.)
:D thanks again for asking!! I really like talking about my comic to anyone who’s willing to listen :)
You know me; a new interest = another dead space crossover :p
I love the rock engineer and the microbiologist hurdling along space together, and the rock that alters at the molecular level and the engineer hurdling along space together. Truly my favourite flavour of dynamics
So- first off, you may notice one major thing:my background is just screen shots of Minecraft. Now this is because I really hate drawing backgrounds. But here’s the kicker- I didn’t realize there was a parkour civilization map I could download before I drew this- I literally found out today when someone who reblogged mentioned it in the tags, and I was like the one guy from that twerking Amongus nonbinary flag post. Yeahhhhh I had a slow day at work, went into a creative world and maxed out the load render distance chunks and then used cheats to make a big af platform and then broke the blocks by hand to get the 3x3 floating blocks. Then I just found a reference to make the fighter houses. I feel kinda silly now having spent all that time when I could’ve just downloaded a world…. Welp! Past is in the past!
Next thing is that, I was thinking of how like- sad(?) it would be if when D3r got like blasted with all the knowledge, he remembered his lost home level of the fighters and how ironic it was that his brother hated the lower levels despite coming from the 3rd lowest level themselves.
And, of course- I FUCKED up D3r’s cape thingy- like it’s just on the wrong side completely. YIKES!
(Also, I thought it’d be fucking hilarious if Avery was from PvPciv and no one knew because he just keeps his sword (or whatever weapon) inside of his slime and it’s considered having it in his hand so he doesn’t just immediately die. )
Anyways. I think this is it for this Au! I had a ton of fun with it and I love dramatic lighting. I’m not great with anatomy, lighting, or perspective, so I tried to really used a bunch of it but also keeping it fun so I didn’t grow frustrated with my art! So I hope you all enjoyed reading this Au as much as I did writing it ^^
(Not my drawing: but my friend gave me full permission to post this because it doesn’t fit the type of posts they normally do, but I believe this masterpiece needed to be seen by the world)
I was showing Minecraft PVPCiv to my friends and then they told me it reminded them of Re:Zero which I had never watched and thus they started showing me Re:Zero-
And my jaw DROPPED when Subaru called Emilia E.M.F and then they drew this when I showed them Evbo’s Master Friend from PKCiv.
This just popped into my head this morning and NEEDED to draw it quickly.
Thinking about how D3rlord3 said “I haven’t seen this in a while” to the parkour text- and I know it was meant as a fun little reference, but the way it was phrased I took as it meaning it’s been years since he’s personally seen it, meaning he didn’t gain that knowledge from the King, but rather on his own.
So as a funny little headcanon in the universe that mc is their IRL; D3rlord3’s home server is the Minecraft Parkour Civilization server- he was born and raised on the master level and then someway somehow dipped from the pkciv and ended up elsewhere. But as a reminder of it all, he can never take off his master-level gold boots.
They’re just a reminder of home.
Oh, and his big brother is the tyrant champion from the first movie 😋✨
!!!!!!!!!!!Your safety and health comes first! Make sure you’re in a well ventilated space, use proper PPE in accordance with your tools and materials safety guides! (i.e: masks, safety glasses, gloves, etc…) and to have the proper emergency centers/ poison control numbers and guidelines handy if you consume any hazardous materials or start feeling unwell !!!!!!!!!!!
BE SAFE!
Materials:
1 ½ inch p-Trap PVC Pipe Adapter (local hardware store)
1 ½ inch PVC pipe cap (local hardware store)
11.5cm length of 1 ½ inch PVC pipe (local hardware store)
4mm EVA foam
Adhesive of your choice (I used contact cement for mine ^^)
Plasti-Dip spray (optional) (I found mine in the spray paint section of my local hardware store + found it at walmart & canadiantire. Dunno where else it would be tbh)
Paints:
Light Grey or dark white/off-coloured white
Dark Grey paint (acrylics work best, but ultimately up to you, spray paint will also work but will have extra steps to ensure you don't paint the rest of the project lol, it's just for the label/ outside bit ).
White paint (optional)
White marker or white pen or white paint (to write the label with)
Tools:
Exact-o knife
Sandpapier (or a dremel if you have, I imagine it would be easier and would have a cleaner/smoother finish with a dremel, but sandpapier with some serious elbow grease and pure determination did the trick for me).
Heat gun or blow dryer (optional)
Templates: they’re at the end. (I am pretty sure they’re sized correctly but best to double check!)
Guide:
Trace and cut P1 (8cm x 17.2cm) and P2 (11.8 x 19.3cm) onto 4mm EVA foam.
Remove cap from the p-trap pipe adapter
↳ Depending on the specific one you got, there may be groves/ extra details on there. It's ultimately up to you whether or not you wish to remove these things.
↳ If you do:
dremel them down, or saw them off with the exact-o knife and sand it down for a smoother look/finish. (it’ll look rough for now, but the layer of plasti-dip and/or spray paint will help with a smoother look at the end. Trust the process 🙏).
Dry fit p-trap adapter and the pipe cap to the 11.5cm pvc pipe.
↳ Since they’re all 1 ½ inch, they’ll all fit very snuggly together, and you shouldn’t need to glue them together.
Take P1 and just fit it around the pvc pipe, adjust the p-trap and pipe cap. It should fit damn near perfect, but there will be some trimming necessary on its horizontal length, measure it out and make the necessary adjustments so it wraps around snugly.
↳ Here if you have the heatgun/ blow dryer, warm up the foam and fit it around the pvc pipe and into its place until it cools down a bit. This helps to keep its form.
With the sandpapier and/ or dremel, rough up the exposed part of pvc pipe
on the backside of P1 (the side that will be glued down), slice very very thin and shallow cuts vertically, horizontally, diagonally, honestly go crazy. This is to make sure that the adhesive has something to hold on to.
Apply the adhesive to the backside of P1 and glue it to the pvc pipe.
↳ Esure everything is snuggly together- that there is no gaps where the foam meets the top of the pipe cap and the bottom of the p-trap adapter, as well as that there is no overlap or gap with the seam of P1 around the pipe.
We now have our Med Pack base, which it will be referred to as such.
Once P1 has dried in place, take P2 and wrap it around the med pack base, making sure it wraps snugly around it all and make any necessary trims to its length to ensure there are no overlaps or gaps.
↳ The top of P2 should sit all along the top of the p-adapter right before the tread neck (the lip part), while the bottom of P2 should align roughly 1.5 - 2cm down from where the top of the pipe cap meets the foam. I would suggest referencing the image of a med pack from the game for fitting P2 to the med pack base.
↳ Similar to the steps of 4-6: slice very thin and sallow cuts to the back of P2, heat it up to help hold its shape better.
Apply adhesive to the back of P2 and glue to the med pack base.
↳ **side note: when glueing P2 to the base, the alignment doesn’t matter, but I had mine cover up the seam of P1.**
↳ You may need to physically hold it all together and apply pressure until it’s dry enough to stick together.
Take the cap from the P-Trap adapter and remove it if it already hasn’t been yet. Flip it upside down and trace the outside of the adapter cap onto paper for transfer or directly on to the 4mm foam. Cut it from the foam and glue to the top of the adapter cap. Once dried, cut and/ or round the foam for a rounder, smoother look.
↳ This part is completely optional, but for a more detailed look, I cut the lid of a small seasoning jar, heated up the foam and pressed and glued it into the foam.
(Optional) Spray a layer of Plasti-Dip or alternative onto the outside medpack and adapter cap. Wait until dry. Determine if a second layer is necessary.
Spray paint base and adapter cap in multiple light layers of a light grey or a dark/off colour white. Follow directions of application as spray paint requires.
Once spray paint is dry, paint P2 with a dark grey.
Once dried, on P2, with a thin brush or white marker/pen, draw a content label box on the front (see image below).
↳“Standard Issue Med Pack” on top of label box, and inside is unintelligible scribbles and squiggly lines ^^
With a black marker or sharpie, draw a thin black circle on the top of the adapter cap.
↳ (Optional) if you’d like, you can paint around the lid on the foam with white (not all the way around, just the sides). For that light effect.
Screw the adapter cap back on the med pack base but not all the way on, cause we want there to be a little bit of neck length.
(optional, but honestly not recommended: I cut that black space in between the p-trap adapter, foam, and cap to resemble the reference photo, but it made my look choppy. If you wish to not do that or would rather paint that black line instead, i would say go for it.)
And done!
templates:
P1:
P2:
@mageddon120 this is for u! I wasn't sure if I could send PDF files over Tumblr DMs (and I also thought that if someone had sent me a PDF file over DMs, I'd be suspicious of opening it lol). So I made a post for this, just in case maybe some other people would be interested too!
And this goes for anyone wanting to make this: If there is a way to share PDF files over Tumblr DMs or other ways, and you would prefer a PDF of the guide, orrrrr if you have any questions, feel free to DM me, and I will send it/ answer to the best of my ability^^
tangentwithtanner
kianamaiart
yousharknotpass
ellievsbear
andulkaphoto
germansingergirl
