Seamsterllini

I'm 24, my name's Jessica, and I love to cosplay =3 Feel free to ask questions or send me a message!

[crazy-little-angel-deactivated2]

Why I Gave Up Cosplay

Since gaining 70 pounds 2 years ago due to my health problems, I have pretty much lost my love of cosplay. And it makes me really sad because I enjoyed it so much. But the part I loved most about cosplaying was bringing the characters I love to life. And I no longer feel like I’m doing that because all of the characters are super skinny and I’m fat.

I was always curvy, but now that I’m so overweight, cosplaying feels completely different. Even the amount of response I got about my cosplay changed. Not that I cosplayed for the attention, but it was disheartening to see the positive feedback go down after I gained weight.

Maybe it would help if I saw more plus sized cosplayers out there. I’ve seen a few and they are awesome. But I’m talking about only a handful of them compared to the millions of skinny ones out there. There’s so many characters I still want to cosplay, but I just don’t have the confidence to try anymore.

I hate to ask this… but would you mind liking/reblogging this if you’re a plus sized cosplayer or if you think plus sized cosplayers are great and enjoy seeing them bring your favorite characters to life, even if they are not the same size as the characters? Like I said, I hate to ask this. But I really need the positivity and confidence boost right now.

[elizabeth-richelle]

I Cant Get Over How Perfect This photoshoot turned out. the Sensenbrenner Park at last Years Matsuricon was the Perfect setting for Jessica’s Godess Modoka’s cosplay. 

Model: @seamsterllini

Location: Matsuricon 2017 

Character: Godess Modoka from Modoka Magica 

[seamsterllini]

Elizabeth is an amazing photographer and was a dream to work with! The pictures are absolutely beautiful ♥️♥️♥️

[ohicosplay]

Cosplay 101: Adhesives

This is meant as a beginner primer for adhesives (that we use [enough to know a bit about {mostly}]). This is meant as an outline that covers the general details of each kind of adhesive. The links direct to the wikipedia page on the adhesive if you want to know more about the full details.

Cyanoacrylate: CA glue for shorthand, aka Superglue or krazyglue. However, if something is marketed as a super/krazyglue and doesn’t contain cyanoacrylate, it’s not a CA glue. This is our go-to glue. It’s strong, but a bit brittle and can melt the crap out of some materials.

Pros:

Strong

Widely available

Cleans up with acetone nicely

Can glue most things together (EVA foam, paper, styrene all work well)

Many consistencies available (thin, thick, gel)

Quick dry/cure time, can be quickened with CA accelerante

Can be mixed with baking soda for an effective gap filler (CA cement)

Safe to use on EVA foam

Readily available anywhere that sells adhesives

Cons:

Fumes/strong smell, ventilation and/or a respirator required if working with large amounts of CA glue

Brittle and non-flexible

Melts polystyrene (EPS/XPS foam aka Styrofoam)

Fumes can leave cloudy residue

Rapid exothermic reaction with leather, cotton, and wool that can cause burns and even fire

Shelf life of about a year unless kept somewhere dark and cool (like the fridge)

Polyvinyl Acetate: Also known as white glue or Elmer’s glue. Useful but a bit basic and requires open evaporation.

Pros:

Pretty safe, just don’t straight-up drink it or rub it into your eyes or nose

Great for paper and other open structure materials (fabric, some open-cell foams)

Widely available

Water-soluble

Inexpensive

Readily available anywhere that sells adhesives

Cons:

Relatively weak and brittle when cured

Needs open-air evaporation to dry

Water-soluble

Long dry/cure time

Gorilla Glue: We’ve used this one a few times and it seems to work fairly well

Pros:

Strong bond

Non-solvent, won’t melt things most of the time (stable with XPS foam)

Readily available anywhere that sells adhesives

Cons:

Needs clamping/pressure to cure properly

Long cure time

Expands during cure process, can squirt/drool out of joint (might be a good thing too, though)

E6000: A strong and flexible glue, great for fabrics or gluing things to fabrics.

Pros:

Very flexible, can hold up to a little stretching even

Strong bond with a bit of surface sanding

Can glue many kinds of things together (EVA foam, fabric, styrene, paper, leather all work well)

Dries clear (though air bubbles and edges can be visible)

Readily available anywhere that sells adhesives

Cons:

Solvent-based, will eat through polystyrene, pretty pungent smell

Long cure time

Can smear easily during curing

May ooze out of the tube and glue the cap to itself (plies might be required to unscrew the cap if this happens)

JB Weld: An incredibly strong 2-part epoxy. I use this a lot to strengthen a mechanical joint.

Pros:

Incredibly strong, can be used to join engine parts together

Fairly shock resistant

Works great on most surfaces

You can drill, tap, sand and carve it once fully cured

Cons:

Very long cure time, about 24 hours

Not flexible at all

Requires a very good joint and a lot of surface prep

Can be brittle under torsion

Needs more cleanup than single-part adhesives

2-part Epoxy: This is a massive group of adhesives so I’m only going to mark the basics

Pros/Cons:

Strong

Cure time can vary from a few minutes to days

Needs more cleanup than single-part adhesives

Ranges from glass-hard to pretty flexible after it cures

Hot-melt adhesive (aka Hot glue): A craft standard and fairly material-safe way to adhere things together.

Pros:

Works on everything that doesn’t melt or [easily] catch fire

Fairly strong with a good joint surface

Pretty safe if you don’t touch the nozzle or glue while it’s hot

Safe to use on polystyrene

Great for EVA foam armor/props

Inexpensive

Glue itself can be versatile and used for filling molds.

Glue sticks can come in a variety of colors

Cons:

Can be a bit messy, nozzle keeps leaking sometimes and leaves threads of hot glue everywhere

May be visible under thinner materials if the glue isn’t smoothed out

Can straight-up melt or ignite some materials (spot test or look up the melting point of the material)

May be only semi-permanent in some cases, depending on the surfaces

Can melt when exposed to heat (don’t leave pieces glued together with hot glue in a hot car)

Contact cement: An adhesive that is applied to both surfaces, allowed to dry, then pressed together.  Barge and Weldwood (US) are brands commonly used in cosplay. Rubber cement is not a contact cement.

Pros:

Very strong, practically permanent once bonded together

Great for EVA foam armor/props (the main go-to for a lot of foamsmiths)

Cons:

Fumes require ventilation and/or a respirator

Requires a ready supply of brushes for application

Shelf life up three months to a year depending on storing conditions. Throw away if the cement begins to set up in the container

Melts polystyrene

Cures in 5-10 minutes, but EVA foam may require a second coat due to its tendency to absorb materials

[cosplaytutorial]

Chainmail Tutorial

Hey guys and gals! I’m working on making a chainmail vest, so I figured I’d put out a tutorial. I still don’t really know how to edit video so it’s just pics. Hopefully between those and my description you’ll all be able to understand everything.

Tutorial by:  bvesci198  Tutorial Link: http://aminoapps.com/page/cosplay/4080681/chainmail-tutorial

[seamsterllini]

TADAAAAAA! Finally posting some full body shots! I'm so freaking happy with how this costume came together in the end. These pictures don't even do her justice. I am SO excited to wear her again ^o^ I definitely plan on getting some professional photos, I just need to find a photographer haha!

[seamsterllini]

AHHHHHHH OMG THANK YOU #ASTL! #ultimatemadoka #godoka #cosplay

[silencedrowns]

A Cosplayer’s Guide to Colored Contacts and Eye Safety (AKA How NOT To Fuck Up Your Eyes Forever)

I’m a cosplayer, I’ve worn contacts for almost 18 years, and I’ve seen so much horrifyingly dangerous behavior with colored contacts and general eye safety in the pursuit of our hobby that it makes me want to scream. I’ve ranted about this before on Twitter (and often) so I decided to make a megapost about it.

I AM NOT EXAGGERATING ABOUT FUCKING UP YOUR EYES FOREVER. I have seen people LOSE AN EYE or get permanent eye damage from unsafe behavior; I’ve also seen people carted off to the hospital over it. Colored contacts and heavy eye makeup can be entirely safe, but you have to know how to use and wear them properly! 

This post will be very long, but I encourage everyone who has an interest in colored lenses (especially circle lenses!) or cosplay makeup to read it. I don’t want you to lose an eye.

Keep reading

[seamsterllini]

View this post on Instagram

The lights are getting there! They twinkle when I move now!

#godoka #ultimatemadoka #cosplay #astl #animestlouis #animestl #stillneedlelittlelove

[anachronisminaction]

Itsy Bitsy Hems

When hemming super sheer and delicate fabrics, I am always reminded of that quote from Futurama, “When you do things right, people won’t be sure you’ve done anything at all.”

I learned this technique from Vicky, one of my frequent co-workers on shows, who is honestly far too modest considering all of the amazing costumes she has made over the years. (She doesn’t really have social media etc.) I forget the exact reason it came up, but she said it was a favorite technique she would use on delicate dresses she made for Coleen Atwood films. The key is adding machine paper (Like from an adding or cash register machine) a nice roll of almost computer-paper weight paper, nothing fancy like the shiny chemical reactant kind. This method is a little time consuming, but with practice you can get amazingly clean hems that are 1/8” - 1/16 on even the most difficult of fabrics.  

For this tutorial I documented sewing the skirt of my Evelyn Cosplay, because the skirt is one continuous piece of fabric (about 5 yards) I really wanted the hem to be as clean as possible, and this technique is perfect for that. The Top two photos were Taken by Eric Anderson, or my finished costume at the Exposition Rose Gardens in Los Angeles.

Step 1 - Lay your fabric/hem edge on a flat surface, like a big table or the floor. It is important to let the fabric sit as you want it to be hemmed. So if its bias and you want the hem stretched out/ to ripple, stretch the fabric gently. If you want it natural - lying relaxed and so on.  pin the adding machine paper under the hem, keeping the desired hem tension. On curved areas tear and angle the paper. Basically you are using the paper to “block out” the desired hem once sewn.

Step 2 -  Stitch about 1/2” from your cut edge, as shown. (I had a 1/2” Seam allowance on my pattern) Once it’s all stitched to the paper, take out your pins and go to the iron. Using the paper as an anchor, use the iron to press the fabric on the stitch line so the seam allowance folds over onto itself. You want a clean sharpe fold.   Remove the paper gently. I find it easiest to tear one side free, taking advantage of the stitch perforations. The second side will fall away much easier; any lingering little bits can be gently wiggled loose with a pin.

Step 3 -  Stitch a second line of stitching next to the first/now the folded edge. If you stitch 1/8” your finished hem will be close to 1/8”, 1/16 will be 1/16” etc. I find I get a nicer result if I *very* gently pull the fabric taunt while sewing this second line. Using very small scissors (I have a curved pair I like for this) trim off the seam allowance as close to the second line of stitching as you can. Press.

Step 4 -  Folding the hem one more time on the second stitch line (or as close as you can get it) stitch through all layers. Again, I find I get a nicer result if I *very* gently pull the fabric taunt while sewing. Trim off your thread tails, press it again and Viola! Done.

[seamsterllini]

And the gloves are done! SO. CLOSE. #godoka #ultimatemadoka #cosplay #mahoushoujomadokamagica #madoka #animestlouis #animestl #astl

[elicatherogue]

10 Tips From a Cosplayer

Okay, so I’ve been doin this nonsense for about 8 years now and here are my 10 biggest tips for anyone else doing this sadistic hobby (This is a bit geared towards people who make costumes just FYI. I will post another more geared for beginners or those who buy later)

1) Remember Why You Do This.

Maybe you showed up to con and were 1 of 74 Jinx’s. Or maybe your costume wasn’t as accurate as someone else’s. Or maybe it feels like everyone else made theirs and you bought yours. So what? Did you have fun? Did you meet friends, and/or bond with the people you came with? Unless you’re in the contests, remember that it ISN’T a contest. And even the contests are meant to be fun. Alternatively, don’t let any elitist fans ruin your fun.

2) Don’t Take Yourself So Seriously.

Remember that being a cosplayer doesn’t make you ‘more’ of a fan than someone who doesn’t. Remember that you do this for your own enjoyment and that is all that matters. Spend as long or as little as you want on a costume, end a con with 20 silly selfies and some new friends, compliment that other cosplayer in the same outfit because you clearly both have something in common, don’t think of them as competition.

3) Don’t Be Afraid to Ask for Help.

Parents, siblings, teachers, friends, neighbors, craft store employees, theater teachers, art teachers, people online. There are tons of people who could offer help with even little things like what glue to use on foam that needs heatshaping(non-flammable x-treme elmers glue is nice) , what paint to use on leggings (apparently fabric paint stretches with it just fine), ask your grandma what stitch is best for rounded edges on cotton (idk), ask a JoAnn’s associate what thread to use. In my experience store associates are extremely helpful, even with things like a second opinion on matching colors.

4) Use Coupons.

Seriously. If you can, set up an email just for coupons. Going to Michaels for a 2 dollar little thing of paint? Use that coupon they emailed you and now it’s 75 cents and you have more money for other things like fancy fabric or idk food. Check if any stores have student or teacher or senior discounts if that’s applicable, then you’ll have a discount even without coupons. Especially good for big purchases. If you’re buying everything at once there is almost definitely some sort of 5 off of 30 type of coupon out there. If you are able, this is a good way to set up a savings for con or your next costume maybe, just look at the receipt, see how much you saved and set that much (or a part) aside for food/hotel/gas/merch.

5) Look at your Source.

No matter how well you know your character or your design do not go very long without looking at the source. Working on a wig? Have a picture in front of you the whole time. Maybe sketch out the different angles beforehand. Going fabric shopping? Stare at the original. If you print out a reference pic know that it may be slightly off. If you’re doing a costume where the color seems different in every shot (like Rey from Star Wars) then pick the one you like. If you can, consider coloring or painting a swatch of the color on an index card and bringing it with you to compare. Seriously. Keep checking the source when working. It’s equivalent to “measure twice cut once”.

6) Measure Twice Cut Once.

Even in crunch. I know, it’s stressful and scary and frustrating but you know what is more frustrating and scary and stressful? It being 8pm the night before the con and you just cut that last bit of fabric too small. Or your wig too short. Seriously. Just double check yourself.

7) Check Yourself Before You Wreck Yourself.

Outdated meme but useful tip. If you’re getting anxious to a difficult level, or exhausted physically or mentally  address it. Take a break. Take a nap. Eat a meal. Go for a walk. Watch an episode of that show you’re trying to cosplay. Play that game. Watch cosplay videos if you’re scared of losing motivation. Just don’t push yourself too hard or you risk messing up parts of your costume and more importantly, you risk hurting yourself. Don’t work until you accidentally stab yourself with a hot iron and have a panic attack. Would you rather spend 15 minutes playing with your cat or crying and bandaging yourself?

8) Use It.

Found some fabric you love for that SnK skirt thing, but it’s infused with glitter?Who cares, use it. Every cosplay you have seen of Red Hood has a lot of leather and cargo pants but you want skinny jeans and suede? Use it. The costume is for you. Make it how you want. To quote the great Hilary Duff “Why Not?” Also, go listen to that song if you need encouragement. 

9) Enjoy The Whole Process.

Maybe it is redundant at this point but seriously. Have fun. Not just at the con, party, photoshoot, meetup etc. Have a wig styling party. You finished that jacket? Nice, wear it out shopping and be proud. Make a playlist for each character you work on or general motivational music. 8-tracks.com is great for this too. Test those seams/that hairgel/ those shoes/ flexibility by putting on your jam and dancing around. Send snapchats to your friends when you test your make up. Skype your aunt to show off that circle skirt. Put your hat on your dog. 

10) Procrastination isn’t Great.

Probably don’t put off making your costume by making a list of tips for other people.

[seamsterllini]

THE WINGS ARE DONE! They're drying now, hence why they're hung up in the shower and not on the dress form haha 19 days!! #godoka #ultimatemadokacosplay #cosplay #astl #animestlouis #mahoushoujomadokamagica #madoka #stillneedlelittlelove

[theladykatarina]

This is insanely cool. How to make craft foam look like leather by travelsatnight.

[ohbuckle]

Damn… pretty convincing!

[heartlessaquarius]

Here’s how I made my “fur” for my Eevee cosplay. I used Jumbo braids from Arda Wigs and then sewed these wefts onto the top of my dress. If you have any questions, let me know!

[seamsterllini]

And the hair bows are done! Getting closer every day, and I’m excited to have everything put together!

[seamsterllini]

THE SOCK/TIGHTS ARE DONE. I am so relieved that these are done, and I’m so happy with how they turned out! 43 days left!!

#cosplay #godoka #ultimatemadokacosplay #animestl #animestlouis

[seamsterllini]

I know I know, not the most exciting pictures, but I'm halfway done with my shoe wings! I sculpted the base shape out of clay, and am going to cover that with some thibra. Then comes the paint and bam! Shoe wings done! #godoka #ultimatemadokacosplay #cosplay #mahoushoujomadokamagica