Untitled

[poorly-drawn-dinopants]

How to do camera review

what is going on guys Greg OHS TV this    is the blink XT wireless security camera    these ones are the newest ones that are    out right now and they can be put    outside in the rain and the snow and the     you know cold weather so their outdoor    cameras and it’s the first of their kind    they run off double-a batteries and they    get a crazy amount of battery life    something like one to two sometimes up    to three years of battery life so    there’s two ways you can power on this    blink XT camera now one way is you can    put in a microUSB cable and plug it into    like a little block and have a power    that way plugged into your wall yeah I’m    going to tell Rob viously you don’t ever    worry about it but another way you can    do it is with batteries now I think    that’s the better way and it comes with    two double-a batteries already now to    put the batteries and all you got to do   http://fixdreviews.net/blink-vs-arlo-security-camera/ a little bit wonky comment away but    basically you need to press down right    here and then pull there you go I got it    there you go and you put the batteries    in right there and then once you have    the batteries in just snap this back    plate back on allah-allah perfect    awesome you can see now it is blinking    or was it’s blinking red right there so    now let’s get it hooked up to the base    station I already have a base station    because I have two other blink cameras    that are for indoors and again these are    going to be for my outdoor and remember    if you don’t already have one of those    base stations they’re only 50 bucks very    easy to buy on Amazon or blinkx website    and very easy to set up so now at this     point I want to download the blink app    so if you don’t already have it download 

Keep reading

[serenityxxx94]

Heat Press Sublimation

so you have your heat press and you have    your heat transfers but you don't know    where to start not a problem in this    video we're going to go over the basic    steps to begin your application process    now seen here is everything you're going    to need to get started using transfer    expresses heat transfers and every order     you get you'll receive application   power press heat press   instructions they can also be found in    the dealer guide or online at transfer    Express comm your transfers will be   power heat press  packaged in a sealed bag so as soon as    you receive them check to make sure that    the spelling colors and sizes are all    correct we include at least one transfer    sheet to test before beginning applying    them to your garments grab a piece of     scrap fabric that's a similar thickness    and type of fabric to test on with the    extra sheet provided you can take a pair    of scissors and cut the transfer into    four or more sections    you're going to take these test    transfers and test your settings on the    heat press and adjust them until you    receive the perfect press so with your    test transfers and your scrap fabric    ready it's time to set up the heat press    start by turning on your heat press    depressing here is a hotronix Auto clam    that has digital time temperature

and    pressure next refer to the application    instructions and set your heat press at    the recommended time temperature and power heat press    pressure if you're using another heat    press other than a hotronix you'll set    your temperature at least five degrees    higher    once your heat press is heated all up    lock down your platen with no fabric    loaded for about 60 seconds to heat up   power press heat press  the bottom plan this helps the ink flow    evenly throughout the fabric next we'll    check for pressure without fabric in the    press the pressure is at a low for to    check the actual pressure before    pressing load your garment on the press    and lock down now without changing the    pressure adjustment and just adding the    shirt the pressure is at a medium you'll    adjust your heat press until you get a    medium to firm pressure or a six to a     ton hotronix digital readouts will test    the transfer next sew lay down a scrap    piece of fabric and pre-press the fabric    to remove any moisture or wrinkles then    grab one of your test transfers and     place it on the fabric lock down your    press for the time on your application    instructions once the press is open you    can peel away the transfer paper as    directed take a look at the print and    the paper and make sure that the    transfer is applied properly if not     adjust your settings slightly and we'll    try again for instance if the ink does    not come off the paper this is an    indication that the time temperature or power press heat press    pressure is not high enough    if the fabric is showing through the ink    after pressing try loosening the power heat press    pressure reducing the time or the    temperature call it transfer Express rep     if you have any questions during the    pressing process    once you have a proper application with    the test transfers you can power press heat press  now move on    to pressing your order and delivering it    to your customer if you have any    questions during the application process    call 862 two two eight zero so that one    of our dealer services representatives    can get you on the right track