Roll Former is a continuous forming operation in which a long stripe of sheet metal is passed through sets of roll tools mount on following stands, each set performing only an incremental part of the forming, until the preferred cross-section profile is obtained. Roll forming machine is perfect for manufacturing Different kind of profile like (roofing type, c to z type, ceiling channel type, u type and much more ) with long lengths and in large quantity.
Roll formed Machine may have compensation over extrusions of a similar profiles. Roll forming machine parts may be much lighter, with thinner walls possible than in the extrusion forming process, and stronger, having been work hardened in a cold state
Roll former have the ability to manufacture a wide range any type of sheet or profile. roll former are held to the same standards as our other product lines and are equipped with high quality controls. With an average of 8-10 miters per minute, roll formers can drastically increase your production. Roll former has always excelled with its design form single machine customer form it 4 profiles differently. We are using a very advancing technology in that our specialty of one machine we are providing a machine in first time in India from that machine u can take out six profiles at one Roll Forming Machine and that is our specialty.
D coiler 2 ton cap.
Entry Gate with
Roll Forming Line with 12 stations, 1 Gear Boxes & 10 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)
Technical Specifications
Maximum sheet width that can be formed : 1550mm
Maximum sheet thickness in CRCA Strips that can be formed : 1 mm
Horizontal distance between shafts : 400mm
Number of forming stations : 12 nos
Vertical station : 11 nos
Total HP for Line : 13
Speed of the machine : 7 mt./minute
Size of machine : 6500 x 1100 x 1100 mm
Mandrel Uncoiler
Coil weight : 2 MT Max
Coil width : 1200 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
