Wholesaler Elite @wholesalerelite - Tumblr Blog

Bennett V351HPU1 Hydraulic Power Unit 12V Pump V351HPU1

A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.

Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.

Attwood Deck Fill fCarbon Canister System Angled Body Scalloped Stainless Steel Cap 99DFCCAS1S

Deck Fill for Carbon Canister System - Angled Body & Scalloped Stainless Steel Cap

Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back.

Features:

Fits 1-1/2 (inch) fill hose

Compatible with Ethanol blended fuels

Designed and tested to prevent water from entering the fuel system

All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling

EPA / CARB Certified

Dual 1 psi overpressure relief safety valves built into the deck fill caps

Automatic nozzle shutoff 4-18 gpm

Deck Fill for Carbon Canister System, angled, stainless steel, single pack

Taylor Made AnchorShade III Sand 22048

AnchorShade® III - Sand

Long known for manufacturing quality marine products, Taylor Made Products has re-invented the highly successful AnchorShade. Several important design changes have been introduced, including larger diameter and solid fiberglass structural ribs, and hinge connectors which are twice as strong as on our last model. Also added to these improvements is a powder-coated aluminum frame (so even if scratched, it will not rust), a 4-point locking height adjuster and a Sur-Lock push-up mechanism. These new innovations are sure to keep your AnchorShade® III looking and working well for years to come!

This uniquely designed 6ft. x 6ft. square umbrella can be used on almost any vessel from a small fishing boat to the larger high-performance boats. AnchorShade® III is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III is perfect for relaxing on the water, at dockside, or just lounging on the beach.

Features:

Adjustable pole locks in place up to 8 feet

Lightweight, mildew/fade resistant UV-treated nylon top

Excellent sun protection. Blocks out 85-90% of harmful rays

Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications

"Market Style" top allows venting to occur without loss of sun protection

Comes complete with its own heavy duty carrying case with shoulder strap

Specifications:

Type: Covers

Box Dimensions: 5"H x 5"W x 58"L WT: 8.4 lbs

UPC: 040011426017

Taylor Made AnchorShade III Sand 22048

AnchorShade® III - Sand

Long known for manufacturing quality marine products, Taylor Made Products has re-invented the highly successful AnchorShade. Several important design changes have been introduced, including larger diameter and solid fiberglass structural ribs, and hinge connectors which are twice as strong as on our last model. Also added to these improvements is a powder-coated aluminum frame (so even if scratched, it will not rust), a 4-point locking height adjuster and a Sur-Lock push-up mechanism. These new innovations are sure to keep your AnchorShade® III looking and working well for years to come!

This uniquely designed 6ft. x 6ft. square umbrella can be used on almost any vessel from a small fishing boat to the larger high-performance boats. AnchorShade® III is designed to be used when anchored or at idle speed on a calm day. AnchorShade® III is perfect for relaxing on the water, at dockside, or just lounging on the beach.

Features:

Adjustable pole locks in place up to 8 feet

Lightweight, mildew/fade resistant UV-treated nylon top

Excellent sun protection. Blocks out 85-90% of harmful rays

Adjustable straps with non-corrosive hardware provide mounting flexibility for nearly all applications

"Market Style" top allows venting to occur without loss of sun protection

Comes complete with its own heavy duty carrying case with shoulder strap

Specifications:

Type: Covers

Box Dimensions: 5"H x 5"W x 58"L WT: 8.4 lbs

UPC: 040011426017

Sika Sikaflex 221 MultiPurpose Polyurethane SealantAdhesive 103oz300ml Cartridge Aluminum Gray 90892

Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum Gray

Sikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.

Uses:

Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics.

Characteristics & Advantages:

Highly elastic and durable

Resistant to aging and weathering exposure

Non-corrosive

Can be sanded and overpainted

NSF registered, Proprietary Substances and Nonfood Compounds (black, gray, and white)

UL listed for potable water (black, gray, and white)

Bennett 129ATP Hydraulic Trim Tab Complete Kit wAuto Trim Pro 129ATP

129ATP Hydraulic Trim Tab Complete Kit with Auto Trim Pro

Hydraulic trim tabs are known for power, precision and durability. Get the most from your boat, no matter what the load, speed or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride and get on plane faster.

Kits Include:

(2) Trim plane assemblies

(2) Hydraulic actuators

(1) Hydraulic Power Unit

Hydraulic tubing and hardware

Helm Control

Bennett V351HPU1 Hydraulic Power Unit 12V Pump V351HPU1

Hydraulic Power Unit

A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.

Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.

Veratron 52mm ViewLine Bezel Flat Chrome A2C5318602301

52mm ViewLine Bezel - Flat - Chrome

The VDO ViewLine modular bezel concept offers true design flexibility in the layout of instrument panels. The three attractive designs in Black, White or Chrome are suitable for every machinery instrument panel or special vehicle cockpit. The range also includes bezels with flat, round and triangular profiles.

Each of the bezel designs is compatible with every ViewLine product.

Features:

Color - Chrome

Bezel Profile - Flat

Size - 52mm

Interchangeable Clip System

*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Specifications:

Color: Chrome

Box Dimensions: 1"H x 2"W x 2"L WT: 0.1 lbs

UPC: 7640178724259

Veratron DeepPipe Level Sender 600mm 0 to 180 OHM A2C1720100001

Deep-Pipe Level Sender - 600mm - 0 to 180 OHM

Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.

Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.

Features:

Tubular Sensor Stainless Steel

Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water

Length: 600 mm

Technical Specifications:

TE Superseal Connector 2-Pole IP67

Operating Temp.: -25°C to 65°C or -13°F to 149°F

Operating Voltage: 6 to 24 VDC

Compensation chamber

Flange: 5-Hole SAE Flange 54mm PA66 GF30

Wiring harness with length of 200 mm

Signal ranges: 0 to 180 OHM

IP67 protection rating

Communication: Analog

Veratron NavControl TFT Controller fAcquaLink OceanLink Black A2C59501982

NavControl TFT Controller for AcquaLink® & OceanLink® - Black

Features:

Color: Black

NavControl TFT Controller

Specifically for AcquaLink® and OceanLink®

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Upgrade your water pump with the Johnson Pump F7B-9 Impeller Pump. High-quality OEM product with a flange style mount. Order now at Wholesal

F7B-9 Impeller Pump OEM - Flange Style Mount

Flexible impeller pumps, F-series, provide an efficient solution to most raw water pumping needs. The primary advantage of a flexible impeller pump is its self-priming ability. As the vanes of the impeller are depressed and rebound, they create their own vacuum drawing fluid into the pump. A dry pump can lift the water up to as much as 3 meters. Thus a flexible impeller pump being used for engine cooling needs not to be located below the water line or manually primed. An added feature of flexible impeller pumps is that they can pass fairly large solids without clogging or damaging the pump. This reduces the need for filtering the incoming fluid. For general raw or freshwater applications, the standard long-lasting neoprene rubber impeller is used. Both the impeller and the seals depend upon the water for lubrication and will soon burn out if run dry.

Shop the Victron MultiPlus-II 24/3000 - 70-50 - 120V at WholesaleElite. Discover high-quality Victron MultiPlus inverters for your power nee

MultiPlus-II 24/3000 - 70-50 - 120V

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.

PowerAssist

The MultiPlus-II will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload occurs. The second level will boost the output of a generator or shoreside supply with power taken from the battery. ESS: Energy Storage Systems

The MultiPlus-II is the critical component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC Power (UPS function)

In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring & Control

When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more.

Shop the high-capacity Standard Horizon SBR-45LI 3200mAh battery for HX400 radio at Wholesale Elite. Ensure long-lasting power for your devi

SBR-45LI 3200mAh Battery for HX400

The Standard Horizon SBR-45LI is the replacement battery for Standard Horizon HX400 Series Handheld VHF Marine Radios.

Upgrade your boat with Bennett Marine's 30x12 Hydraulic Trim Tab System. Enjoy precise control and stability on the water. Shop now at Whole

30x12 Hydraulic Trim Tab System with One Box Indication

Hydraulic trim tabs are known for power, precision, and durability. Get the most from your boat, no matter what the load, speed, or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride, and get on plane faster.

VDO SingleViu 100mm 4 Tachometer 4000 RPM A2C3832800030

SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.

These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.

Features:

0-400kHz Default Input

RGB LED Illumination (default illumination set to White)

Water Resistant Front & Rear

Includes Wire Harness

Voltage 12-24V

Molex MX 150 8 and 12 Pin Connector

Spin-Lok™ Mounting Hardware

Analog Input

∗Sold as an Individual

Upgrade your sailing experience with the Raymarine EV-100 Wheel Evolution Autopilot. Shop now at WholesalerElite for the best deals on rayma

EV-100 Wheel Evolution Autopilot

Features:

A complete autopilot-in-a-box

Evolution Ai for superior performance

No calibration required

Quick and easy installation

Fits most types of sailboat wheels

Simple, robust clutch engagement

For boats up to 16,500 lbs (7,500 kg)

For 12V DC power systems

Includes p70s Autopilot Controller

Includes:

EV-1 Sensor Core

p70s Autopilot Control Head

ACU-100 Actuator Control Unit

Wheel Drive

Evolution Cabling Kit

EV Unit O-Ring Pack (set of 2)

Wall Mounting Bracket

The EV Sensor Core

At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.

TACO Grand Slam 280 Outrigger Mounts GS280

EV-100 Wheel Evolution Autopilot

Features:

A complete autopilot-in-a-box

Evolution Ai for superior performance

No calibration required

Quick and easy installation

Fits most types of sailboat wheels

Simple, robust clutch engagement

For boats up to 16,500 lbs (7,500 kg)

For 12V DC power systems

Includes p70s Autopilot Controller

Includes:

EV-1 Sensor Core

p70s Autopilot Control Head

ACU-100 Actuator Control Unit

Wheel Drive

Evolution Cabling Kit

EV Unit O-Ring Pack (set of 2)

Wall Mounting Bracket

The EV Sensor Core

At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.

Trending Blogs

Recently Viewed Blogs

Wholesaler Elite