Widespread Industrial Supplies, Inc.

[widespreadind]

Hand Cutting and Drilling Tools

Most Common Mistakes

1. Setting a board to be cut between two backings. Rather, cantilever the board over the outside of one backing to abstain from restricting the saw edge when the board drops. This technique will maintain a strategic distance from "kick back."

2. Neglecting to pick the fitting saw edge for the material being cut Always utilize the best possible front line for the employment you are doing. That implies one, that is sharp and in addition made for a given material.

For sawing and amassing, a standout amongst the most valuable extras is a couple of saw stallions. They can mean the contrast between a simple, agreeable assignment and a troublesome one. Saw stallions support both finishes of your work while permitting space for the saw.

Hand Tools

Hand Tools are as key as the force instruments.

Cross-cut Saw. This is utilized to cut over the grain of wood. It has littler, balance teeth. A 8-point saw is best for general use.

Tear Saw. A tear saw cuts with the grain, and has much bigger teeth.

Mix Saw. This cuts both crosswise over and with the grain.

Hacksaw. This apparatus is utilized on metal, plastic, and electrical channel.

Backsaw. This saw is utilized as a part of conjunction with a miter box to cut a consummately straight line over a bit of wood. The steel backing keeps it adjusted.

Keyhole Saw. This has a sharp edge that is smaller at the tip than at the heel or handle. It is utilized for cutting openings as a part of drywall or framing or for bended cuts.

Adapting Saw. An adapting saw is expected to take after an unpredictable, fragile, or many-sided cut in wood. The sharp edge is dainty, fine toothed, and removable.

Tips on Sawing

1. Do not store saws in tool stash or where the teeth will get harmed. Hang your saws if conceivable. If not purchase a plastic tooth watches or make one out of cardboard.

2. Keep saw cutting edges sharp. Keep them out of contact with metal or concrete and stone. Expel any nails from wood before sparing.

3. Protect your saw sharp edges by covering them with glue wax or a lighter evaluation of machine oil. Keep them in a cardboard sheath.

Etches are wood-cutting devices. It is best to buy an arrangement of etches running from 1/4" to 1/2" in widths for general use.

Attachment Chisels are intended to be utilized with a hammer. (I prescribe not Using a sledge to strike an etch.)

Tang Chisels are for working with the heaviness of the hand as it were. For more particular use, buy a decent sloped edge

Cabinetmaker's Chisel for completion work.

The square edge of a confining etch is best to form work, while the tight mortise etch serves to split waste away.

Tips on Chiseling

1. Start your edge delving into the wood, marginally inside your rule mark.

2. Do not cut too profoundly. Etches are intended to chip and shave away. The inclined edge goes into the work so that it always coordinates the etch out of the wood for better control.

3. Keep the front line coordinated far from your body and hands.

For more details visit our website or Widespread Industrial Supplies, Inc. - http://www.widespreadind.com/

1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

Cutting Tools Supplier

Grease Fittings Supplier

Pipe Fittings Supplier

Tools Supplier

[widespreadind]

Removing Drywall Anchors from wall

There are a few reasons you might need to expel drywall Anchors from a wall. You've either introduced the Anchors in the wrong place or you're restoring your wall and don't need the grapple to be seen. Regardless, you'll have to know how to expel your wall Anchors. Here's the manner by which to do it.

Step 1 – Remove Your Anchor

Some Anchors, such as strung Anchors, can undoubtedly be evacuated by pulling or unscrewing it from its opening in the wall. Utilize a screw driver to back the grapple out of the wall on the off chance that it has been screwed into the drywall. With some Anchors you can back it out of the wall. With others, this may not work.

Step 2 – Push Your Anchor into the Wall

There is some wall Anchors that you won't have the capacity to retreat from the wall. With these, just push them into the wall by hitting them with a sledge and a screwdriver until the Anchors is pushed over into the drywall or until pushed into the space behind the drywall.

Step 3 – Fill and Paint Your Anchor Hole

On the off chance that you don't plan to utilize your emptied grapple opening to introduce another Anchors, essentially fill it with putty or drywall compound and paint it.

For more details visit our website or Widespread Industrial Supplies, Inc. - http://www.widespreadind.com/

1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

Anchors Supplier

Carriage Bolts Supplier

Drywall Screws Supplier

Flange Bolts / Stove Bolts Supplier

Hex Head Cap Screws Supplier

Lag Bolts Supplier

Machine Screws Supplier

Self-drilling Screws Supplier

Sheet Metal (tapping) Screws Supplier

Tamper-proof screws Supplier

Threaded Rod / Stud Bolts / Coupling Nuts Supplier

Wood Screws Supplier

[widespreadind]

How to Install Plastic Wall Anchors

Use Plastic Wall Anchors when you need to hang a photo or other thing on an empty Wall, entryway, or roof, especially if there are no wood studs or shafts behind the surface. The grapple will give the grasping power that you can't get with nails or screws alone. The grapple is made with an empty focus that grows when the screw is fixed into it. This pushes the grapple against the material with enough rubbing that it Anchors set up.

Step 1 - Choose the Right Wall Anchor

Gauge the heaviness of the thing you need to hang. Plastic Wall Anchors are best for genuinely lightweight things, for example, thirty pounds or less. Consider whether there will be standard power on the grapple. In case you're mounting a towel bar, for instance, you'll require a bigger grapple than if you were hanging a photo of the same weight. Pick ribbed Anchors for extra quality. Wall grapples are regularly sold in little bundles with the relating screws; however in the event that you go to a handyman shop, you may find that Anchors and screws are sold exclusively.

Step 2 - Prepare for Anchor Installation

Mark the situation of the Anchors with the drill or pencil. Make an opening in the drywall that is somewhat littler than the plastic grapple. In the event that you utilize the bit, you won't have the measure of dust you'll get with a drill.

Step 3 - Insert the Anchor

Utilize your fingers to press the Anchor into the surface. Tap the leader of the Anchors daintily with the sledge until it is flush with the Wall. Expand the gap somewhat as opposed to attempting to constrain the Anchors. In the event that the fit it too tight, the Anchors will twist or break, and you'll need to begin once again with another one. Utilize a flathead screwdriver or the paw end of the sledge to tenderly expel the Anchors in the event that this happens.

Step 4 - Finish Up

Watch that the Anchors fit cozily. You ought not to see any crevices between the Anchors head and the Wall. In the event that you do, you can fill the hole with drywall patch, giving it a chance to dry altogether before suspending any weight from the Anchors, or you can basically take out the grapple as depicted above and supplant it with a bigger one. Put the fastener the grapple and finger-fix. Utilize a screwdriver to fix the screw into the Anchors. Anchors away from over-fixing.

Presently you're prepared to hang the photo or other thing from the secured screw.

On the off chance that you ever need to expel the Wall Anchors, you'll have to first evacuate the screw. After that, you can utilize a flathead screwdriver or mallet paw to extricate the Anchors and back it out of the gap. You may wind up gouging the Wall a bit, however you can fill the opening and any gouges with drywall patch. Apply sparingly, permit to dry, then you'll be prepared to sand and repaint.

 For more details visit our website or Widespread Industrial Supplies, Inc. - http://www.widespreadind.com/

1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

Anchors Supplier

Carriage Bolts Supplier

Drywall Screws Supplier

Flange Bolts / Stove Bolts Supplier

Hex Head Cap Screws Supplier

Lag Bolts Supplier

Machine Screws Supplier

Self-drilling Screws Supplier

Sheet Metal (tapping) Screws Supplier

Tamper-proof screws Supplier

Threaded Rod / Stud Bolts / Coupling Nuts Supplier

Wood Screws Supplier

[widespreadind]

Widespreadind.com - Plastic Anchors vs. Metal Anchors

Plastic anchors ought to be a key expansion to your home change tool stash. A plastic grapple is regularly a mooring sleeve for hanging objects on inside dividers. They are anything but difficult to utilize and are usually included with sections, racks, and substantial picture outlines. Plastic anchors are by all account not the only kind of grapple accessible. There are additionally metal stays that property holders can use for securing articles to dividers. Be that as it may, they are utilized as a part of various applications.

Grapple Design

The contrast between the two sorts of grapples starts with the numerous plans that each consolidates. Plastic grapples are regularly sleeves that a screw is crashed into. This sleeve is set into a pilot gap in the divider and gets the sides of the divider as the screw is crashed into the sleeve. A metal stay can have numerous plans since they are utilized as a part of more applications. A straightforward sleeve to a switch jolt, jolt stays and molly jolts are all distinctive sorts of metal grapple outline.

 Stay Use

A plastic stay is for the most part going to be utilized for drywall applications. At the point when driving a screw, or a nail, into drywall, the gypsum inside is not going to hold it set up for long. With any measure of weight connected to the screw it can without much of a stretch slide out. The plastic grapple is for littler applications like picture casings and little retires. Metal stays, then again, can be utilized as a part of a wide range of utilizations like bond, wood, drywall, and solid pieces. They are incredible for securing posts for an arbor, introducing a hand rail, vast racking units, and even rooftop rafters.

Stay Installation

Introducing the different stays are both ward upon a drill. For the Plastic anchors a basic cordless drill is sufficient to make a pilot opening. Once the opening is made, a little mallet is utilized to drive the grapple into the drywall. The gap ought to be same width of the opening of the plastic sleeve. Metal grapples may require a heavier obligation drill (on account of introducing in cement or pieces). Once the gap is bored into the material you essentially position the stay into the pilot gap by driving it in with a little sledge.

Strength Metal Anchor Installation

There are some metal stays that will require an exceptional apparatus keeping in mind the end goal to utilize them legitimately. A molly jolt, which is a jolt with metal teeth that spring out and implant into the back of the divider material, is a decent case of an extraordinary stay. A molly setter is utilized for this application. Once the pilot gap is bored into the material, the molly setter places the grapple into the gap and hauls the included screw out to set the teeth.

It Is All About Application

To figure out if or not a plastic stay, or a metal grapple, will be required in a given circumstance you should take a gander at two things. The heaviness of the item that you are going to hang, or secure, and the kind of material that you are mating it to. A plastic stay is vastly improved for a drywall covering and a little edge. Be that as it may, the metal grapple is better for concrete and overwhelming racks.

For further details, please call on [phone] or email at [email protected] or visit our website:http://www.widespreadind.com/

Abrasives     suppliers

Anchors suppliers

Carriage Bolts     suppliers

Chemicals suppliers

Cutting Tools     suppliers

[widespreadind]

Introducing Wall Anchors Step-By-Step

Wall Anchors are utilized to counteract harm to mortar dividers when hanging substantial things like work of art or different things from dividers. Wall Anchors can be developed of either plastic or metal and are typically somewhat littler than the nail or screw that is being utilized to hang the thing on the divider.

Sorts of Wall Anchors

Switch fasteners are metal divider stays that have two wings on either side of the screw grapple. While sliding these grapples into spot, the wings should be collapsed back and when the stay is completely through the divider, the wings spring open. Switch jolts are astounding for giving backing to direct to substantial articles on dividers.

Molly Wall Anchors are likewise regularly called empty divider stays. They are developed of metal and look fundamentally the same as plastic Wall Anchors. They are pushed into a gap that is bored into the divider. At the point when the screw is strung through the grapple, little opened sides of the stay extend and smooth out against the divider, giving a wide bolster base. Molly stays are useful for hanging protest that are light to modestly overwhelming.

Plastic divider stays are useful for hanging protest that range from light to exceptionally direct in weight. They are developed of plastic and look fundamentally the same as empty Wall Anchors. Be that as it may, rather than being developed of metal, they are produced using plastic and they don't have little openings in favor of the grapple. Rather, they seem like an expansive plastic screw string. Once the plastic grapple is pushed into spot, a Wood screws, Sheet Metal Screws, Self Drilling Screws are strung through the focal point of the stay. As the screw advances, the plastic strings of the stay grow and make a bigger backing for the grapple.

Step 1

Pick the area where you need to introduce the Wall Anchors. Mark this spot with a pencil.

Step 2

In the event that you are introducing molly grapples or flip fasteners, string the screw into spot before starting to introduce the stay.

Step 3

Utilizing a drill, bore a gap where you have denoted the divider. Utilize a bore that is somewhat littler than the screw you will utilize the gap, particularly in the event that you are utilizing plastic divider stays.

Step 4

Press the Wall Anchors into the opening. With switch jolts you should overlap down the flip wings as you embed them into the divider. At the point when the jolt is totally set up the switches will pop open to give backing to the weight being put against the divider. With molly jolts and plastic Wall Anchors, you should simply press the stay into the opening.

Step 5

Introduce the tightens the divider stays. With molly fasteners and plastic stays, the screws will be somewhat littler than the grapple and the stay will naturally grow as the sink advances the grapple, giving backing to the divider.

For further details, please call on [phone] or email at [email protected] or visit our website:http://www.widespreadind.com/

[widespreadind]

Widespreadind.com - Advantages and Disadvantages of Plastic Anchors

Plastic anchors are used quite often in homes that are built with dry wall. If your home is built with dry wall, you will probably want to use some type of anchor when you decide to hang objects on the walls. There are 2 types of plastic anchors; a plug anchor and a wing anchor. Wing anchors have large wings on each side that help keep it in the wall. Plug anchors are narrow tubes with traction marks along the tube to help it stay in the wall. Both of these anchors are easy to find at your local home improvement store.

Plastic anchors are utilized regularly as a part of homes that are worked with dry wall. On the off chance that your house is worked with dry wall, you will likely need to utilize some sort of grapple when you choose to hang objects on the wall. There are 2 sorts of plastic grapples; a fitting stay and a wing grapple. Wing grapples have huge wings on every side that keep it in the divider. Plug grapples are tight tubes with footing marks along the tube to help it stay in the divider. Both of these stays are anything but difficult to discover at your nearby home change store.

Advantage 1 - Plastic Anchors are Inexpensive This is one of the best preferences of utilizing Plastic wall Anchors. They are the least expensive Anchors you can purchase. Since they are reasonable, you don't need to stress over harming them. Do-it-yourselfers locate this engaging. Advantage 2 - Plastic Anchors Come in a Variety of Sizes Regardless of the measure of your

screw, there is a plastic stay that will fit it. Bringing your Anchors with you to your nearby home change store, will guarantee that you get the ideal fit. Plastic Anchors are likewise accessible for buy in units. In this manner, on the off chance that you require more than one size you can discover precisely what you are searching for. Advantage 3 - Plastic Anchors are Specialized Plastic Anchors can be acquired without the top edge. This implies you can introduce the stay flush with your divider. Plastic Anchors can likewise be obtained with specific fittings on the head. This implies you can utilize them with peg board, picture hanging units, and wire rack grapples. Advantage 4 - Plastic Anchors are Available with Wings

Toggle bolts are a portion of the best stays cash can purchase. The switch part of the stay keeps it in the divider so it can bolster more prominent weight. The plastic wing stay is developed in a comparative way. The wings that project from the side of the stay go about as a switch and keep it in the divider and you're hanging object off the floor. Wing stays are sold in an extensive number of measured with different sorts of wings. Disadvantage 1 - Plastic Anchors Require Pre-drilled Holes There are various dry wall anchors available that don't oblige you to pre-drill gaps. Plastic anchors do require pilot openings, in any case. When you utilize plastic stays, you will need to have a drill or bore driver accessible. With the force instrument, you will penetrate gaps into the divider at foreordained focuses. It is best to utilize a level to stamp the area of the openings. Once the gaps are stamped, you will penetrate into the dry divider. Once the opening is penetrated, you will embed the Plastic anchors. On the off chance that you are utilizing a wing stay, you will need to utilize your fingers to push down the wings before you embed the grapple. Disadvantage 2 - Plastic Anchors are Not the Strongest Anchors

Plastic Anchors are not the most grounded dry wall anchors accessible. You can locate a metal grapple that is fit for holding more weight than a plastic stay.

There are both favorable circumstances and drawbacks to plastic grapples. In any case, plastic grapples are ideal for the normal needs.

For further details, please call on [phone] or email at [email protected] or visit our website :http://www.widespreadind.com/

[widespreadind]

Widespread Industrial Supplies inc. Supplier of best quality fasteners

Made utilizing top quality raw material Widespread Industrial Supplies, Inc. is the main supplier of high respectability extraordinary fasteners 'taking care of customers' demanding requests for basic applications in unfriendly situations. We have faith in supplying dashing in fascinating materials is a work of art and it is something we have consummated at Widespread Industrial Supplies, Inc. Our fasteners are accessible at financially savvy costs and are profoundly famous in US market.

Widespread Industrial Supplies, Inc. Fasteners has a huge demand from commercial ventures like Oil Refineries, Automotive Repair and Maintenance, Machine Shops, Metro Maintenance Shops, Manufacturing Plants, MRO Facilities, County Correctional Facilities, City and County Maintenance Yards.

T Bolt

The wide range of T BOLT offered by us is accessible in various sizes with the goal that it fit in different applications. These are generally appreciated for their strength, sturdy construction, erosion safe components, and application particular plans. T BOLT is utilized as a part of numerous sorts of machines, as these are accessible in various completions to meet the shifted modern prerequisites.

HEX NUT - http://www.widespreadind.com/screws.html

We offer a subjective scope of Hex Nuts available in different technical specifications. These can be effortlessly customized by particulars gave by our customers. These are the most well-known type of NUTS, which are planned to be utilized on outer or male screw threads, for example, a fastener, with the end goal of fixing two or more segments.

FULL THREADED STUDS - http://www.widespreadind.com/rod.html

We offer comprehensive range of STUDS BOLTS, which is utilized widely as a part of different electrical, synthetic and building segments. These are accessible in various shapes and sizes and are figured for their different elements, for example, corrosion resistance, dimensional precision and more administration life. Our scope of item is exceptionally requested the whole way across US due to its prevalent quality and practical costs.

STUDS BOLTS - http://www.widespreadind.com/rod.html

We offer a thorough scope of STUDS BOLTS, which is utilized broadly as a part of different electrical, substance and building segments. These are accessible in various shapes and sizes and are figured for their various features, for example, erosion resistance, dimensional precision and longer service life. Our scope of item is much requested the whole way across the globe in view of its superior quality and financially savvy costs.

For further details, please call on [phone] or email at [email protected] or visit our website: http://www.widespreadind.com/

[widespreadind]

UNDERSTANDING FASTENERS

Fastener- A mechanical device that holds or joins two or more components in definite positions with respect to each other and is often described as a bolt, nut, rivet, screw, washer, or special formed part. Tensile strength- The maximum tensile-applied load a fastener can hold prior to facture (vertical stress) Shear strength- The maximum load applied to a fastener’s axis that can be withstood prior to failure (horizontal stress) Proof Load- The tension applied load that a fastener must withstand without any indication of permanent deformation or failure. Proof load is typically calculated at 90-93% of the minimum yield strength. FASTENER IDENTIFICATION Color: Grade 8 bolts tend to be yellow in color, which is zinc yellow dichromate plating.  Grade 5 bolts tend to be silver in color, which is clear zinc plating.  Stainless steel bolts have a dull grey finish. Head Markings: Imperial (Fractional) bolts are identified by the number of the lines on the head + 2.  A grade 5 bolt will have three lines on the head. A grade 8 bolt will have six lines on the head. Metric bolts will be designated by decimalled numbers. (8.8, 10.9, 12.9) Country of Origin: Designated by manufacturer symbol on bolt head THREAD PITCH FRACTIONAL- THREADS PER INCH (TPI) USS/UNC- COARSE THREAD SAE/UNF- FINE THREAD EX.  ¼-20 HAS 20TPI (USS / UNC)        ¼-28 HAS 28TPI (SAE / UNF) METRIC- MEASURED GAP BETWEEN EACH THREAD IN MM EX. M10 X 1.5 HAS 1.5MM BETWEEN EACH THREAD For further details, please call on [phone] or email at [email protected] or visit our website: http://www.widespreadind.com/

[widespreadind]

Supplier of Grinding Wheels in Los Angeles USA

Widespread Industrial Supplies, Inc. is a Exporter & Supplier of Grinding Wheels in Los Angeles. Our product range also comprises of Industrial Screws, Industrial End Mills and Industrial Reamers. We are amongst the well renowned suppliers of Grinding Wheels in the global market. This wide range of grinding wheels is of superlative quality and available at market leading prices. These grinding wheels are procured from reliable vendors for the assurance of their quality. Our grinding wheels are used for various grinding (abrasive cutting) and abrasive machining operations. The Grinding wheels that we offer are widely used in various industries like Automation and Chemical industries.   Features:

High efficiency

Capacity to withstand in rugged situation

Corrosion resistance

Get in touch

Widespread Industrial Supplies, Inc. 1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

[widespreadind]

Bonded Abrasive Wheel in Los Angeles USA

With excellent expertise, Widespread Industrial Supplies, Inc.  provide a competitive range of Bonded Abrasive Wheel. These wheels are broadly used on portable angle grinders. These wheels are manufactured using high quality of raw materials. These Bonded Abrasive wheels are available in various specifications and sizes. Our products are consistent and sturdy in nature and these are available at market leading prices.   Features:

High-end quality

Smooth operations

Industry leading prices

  Get in touch

Widespread Industrial Supplies, Inc. 1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

[widespreadind]

Abrasive Grinding Wheels in Los Angeles USA

Widespread Industrial Supplies, Inc. is involved in offering a qualitative range of abrasive grinding wheels to the clients. These are manufactured from high-grade raw material using advanced technologies as per the highest industry norms and standards laid down by the governing authorities. Owing to the superior features that these offer, the products are widely used by several reputed companies in various industries. Few salient features of the range are listed below:

Longer operational life

Resistance against deterioration

High mechanical strength

Get in touch

Widespread Industrial Supplies, Inc. 1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

[widespreadind]

Super Abrasives Grinding Wheels in Los Angeles USA

Widespread Industrial Supplies, Inc.  is a Supplier & Trader of Super Abrasives Grinding Wheels. Our product range also comprises of Bonded Abrasives, Coated Abrasives. We have gained recognition as an eminent enterprise, devotedly engaged in offering a broad range of Super Abrasives Grinding Wheels. Using quality approved raw material with the help of hi-tech machinery, these wheels are precisely manufactured under the guidance of adept professionals at our vendor's well-equipped production house. Apart from this, we provide our entire range in numerous specifications in order to meet varied needs of our patrons. Furthermore, clients can avail these wheels at industry leading prices.

Features:

Industry approved design

Enhanced durability

Ruggedness

Get in touch

Widespread Industrial Supplies, Inc. 1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

[widespreadind]

Saw Chain Grinding Wheel in Los Angeles USA

Saw Chain Grinding Wheel commonly used for Sharping Saw Chain. It is a common tool required for sharpening tools for better usage and efficiency. Fabricated using optimum quality factor inputs and sophisticated technology to meet the requirements of the customers. These are designed in compliance with the international standards.

Features :

These wheels use the most superior material in fabrication process

These wheel is controlled by handcrafted machines such as portable grinder

These wheel can be operated at maximum speed of 100 M/s

These product is based on latest technology and machinery

Get in touch

Widespread Industrial Supplies, Inc. 1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

[widespreadind]

Grinding Wheel Dealer in Los Angeles USA

Widespread Industrial Supplies, Inc. works to please our valuable customers with our excellent quality product range. Our Grinding Wheel is perfect in dimension and flawlessly finished. Our offered range of products including Grinding Wheel is obtained after the use of superior quality raw material processed in high advanced machines. We have given extra fine finishing to our final product range to attain maximum satisfaction of our clients.   Features:   Unmatched quality High grade material Thrifty prices

Get in touch

Widespread Industrial Supplies, Inc. 1220 S. Boyle Ave., Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

[widespreadind]

Grinding Wheels Supplier in Los Angeles

Widespread Industrial Supplies, Inc. offers Grinding Wheels in Los Angeles which support for aggressive performance and successfully meets all rough and precision application needs. Available in multiple tier and abrasive choices, these grinding wheels provide suitable support for meeting all de-burring, shaping and sharpening needs. Some of its features include suitable for high speed tool steels and other metals; finding use in steel mills and other areas; support efficient metal removal; provides for high cutting speeds, safe operation and longer wheel life.

Get in touch

Widespread Industrial Supplies, Inc. 1220 S. Boyle Ave. Los Angeles, CA 90023 Telephone: [phone] FAX: [phone] Email: [email protected]

[widespreadind]

Stainless Steel Pipe Fitting

 We are the prominent company involved in offering Stainless Steel Pipe  Fitting. Reckoned for their rugged construction and least maintenance,  these fittings are fabricated by using best quality raw material with latest   techniques. In addition to this, these are in huge demand among our customers  and have gained high appreciation. Our clients can avail these in plethora of  range and specifications. Moreover, these are easily available in the market at  reasonable prices.    Features:

 High stability

 Easy to install

 Accurate design

 Stainless Steel Fitting

Our company has gained name and fame in the providing  Stainless Steel Fitting. Developed and designed as per the need of the  industry, these are manufactured from splendid quality of steel material which  is purchased from our trusted and certified vendors. To add on, these fittings  give hassle free performance for long period of time and have universal  designs. Along with this, these are available at market leading prices.    Features:

 Robust

 High strength

 Corrosion resistant

[widespreadind]

Extensive Range Of Pipes and Tubes

Widespread Industrial Supplies offers the extensive range of  the pipes and tubes fittings which is fabricated with distinctive metals. Our whole product range is  available in various grades and specification. These tubes and pipes fittings are  fabricated using the different metals which comprises stainless steel, copper  steel, alloy steel, nickel alloy and copper alloy. Our products are known for  their international quality and technical standards. Our products find wide  application in the various industry such as oil & gas, petrochemical, pharmaceutical,   fertilizers, construction, food, power and instrumentation.  Features:

 Corrosion resistant

 High graded metal

 Customized length and thickness

 Fabrication with diversified metals

 Long lasting

  We are looking for the queries from all over USA.  Pipe fittings basically include the range of components that  are used to connect pipe ends for in-line, multi-port, offset and mounting   configurations. Pipe fitting cross sections are mostly, but not always, circular in shape to match with the pipe section with which they are connected.  Pipes can be metallic or plastic and pipe fittings vary depending on the type  of pipe used. Pipe  fittings are used for various purposes. They can be used to extend or  terminate pipe runs, change a pipe's direction, to connect two or more pipes  and to change the pipe size.