SimSlice's Bone Furniture Repo'd to @fracturedmoonlight's Stone Super Set
A lot of the stone recolors work well on this set, especially if you want the bones to look old or burnt (here's my stone super set tag). Poly count is a little on the high side but not too bad. The lounger is 7560 but it's a 3 tile object, the table is 3360, and the chair is 2660. I've never seen recolors for this set so I didn't bother changing the guids, filenames are the same
download ideal plantsim and pollination technician!
these are replacement templates for all 27 faces and the hidden alien template. there is minimized differences between the female and male faces, and all faces have been edited to have more unity between ages. pollination tech is replaced by 28Alien and ideal plantsim is replaced by 26Eelf.
these were created using my old sims and templates i already had. credits are listed below.
these were inspired by @pooklet's september face templates. taken directly from their post, make sure to grab these fixes for faces 21 and 25 plus the unhidden alien template, and this mod that adds the alien and elf templates to the townie pool.
this is the same gift i gave out last week, now for everyone! thank you to @dark-side-princess-sims for the previews.
these are my rainbow stitch zombie and insectoid alien default skins made nondefault and recolored. there are five recolors of the zombie and four recolors of the alien. these work for all ages, are geneticized (i believe all are at 0.9), and are NOT townified.
also included are nondefault recolors of the eyes from those defaults! i... can't remember if i geneticized those or not. i probably did, but didn't townify them. there's five recolors of the zombie eyes and four recolors of the alien eyes.
these use my moonshadow skins as a base. credits for those are included below.
hello everyone, on the twentieth day of this advent collab I am bringing you the most boring preview picture you will see this December! eleven new custom face sliders!
Here, you will find the following sliders, available in both bodyshop and CAS:
cheekbone width
cheekbone length
jawline squareness
upper lip area width
nose fold rotation (V1 and V2)
nose vertical length
nose tip length
nose bridge shape (V1 and V2)
broken nose
GET 'EM HERE!
Massive thank you to @angelapleasant for getting this whole event together (you've done a fantastic job!) and to all the other creators who have both been and whose days are yet to come :D
preview pictures explaining as to which slider does what under the cut
Slider #1: cheekbone width
Self explanatory really, makes the cheekbones wider (but not deeper, nor taller). A bit like that one maxis slider but without any brow adjustment
Slider #2: cheekbone height
Makes the cheekbones longer or shorter on the y axis
Slider #3: jawline squareness
Affects the back of the jaw, changes the width without changing the chin or cheek width (unlike the maxis equivalents)
Slider #4: Upper lip width
The name's a bit confusing, it doesn't affect the upper lip but the area immediately above the upper lip, below the nose (I did look to see if it had an official name but that search sadly didn't turn up much). It's a little hard to see in the screenshot, but it makes this area wider or narrower.
Slider #5: nose fold rotation V1
This changes the angle of the nasal folds, rotating them up and down (as I've poorly tried to demonstrate in the screenshot). V1 affects a smaller area than V2, not really affecting any polygons around the mouth
Slider #6: nose fold rotation V2
Does the same thing as V1 nose fold rotation, but affects a larger area - this one moves more polys, including some near the mouth (despite the screenshots I swear they're different!). I only intended to make one slider for this, but couldn't decide which to keep so you get both :D
Slider #7: nose length
This slider makes the nose longer and shorter on the face, but in a different way to maxis' slider for the same thing in that the whole nose is stretched, centered in the middle of the nose, not just the nose tip moving up and down. (please ignore the clipping on the brow! the furthest point on the slider was too much for this guy's face but works fine on others)
Slider #8: nose tip length
like the maxis nose length slider, but only affects the tip of the nose
Slider #9: nose bridge shape V1
Makes the top of the nose bridge narrow and the nose tip wide, or the top of the bridge wide and the tip narrow, forming a triangular shape
Slider #10: nose bridge shape V2
Like slider #9, but affects only the nose bridge and not the nose tip, making it taper inwards our outwards from the top.
Slider #11: broken nose
forms a curve on the nose bridge off to the left, or off to the right, a bit like what you might get if your sim broke their nose
---
phew, that's all of them! hopefully these are ones that haven't been done before (I didn't previously have any of these, anyway), and that you might find at least some of these useful :D
As always, if you spot any issues, please let me know and I'll try and fix it asap.
I should've made a nice even number to make the first preview a bit nicer haha
apologies all, I messed up the GUID on one of the nose length slider icons, it was overriding the bedroom icon in build mode > sort by room (thank you to @matti2k2 for pointing it out!)
I've fixed the download in the original post but if you've already downloaded, I've uploaded a fixed version of just the nose length slider here
hello everyone, have you ever found yourself cursing the sheer amount of face there is in this franchise? truly, so many eyes and noses, how are we ever supposed to keep track?
well friemds, on this wonderful wednesday i am bringing you the only slider you will ever need again. who needs to worry about eyebrows and jawlines when there is no face there at all? that's right! this slider will vanquish that visage, shrink it right down until it is no more! incredible! totally not horrifying at all!
is this the answer to your woes? of course it is. do not debate. you can download it, the most useful slider ever released, in the below location:
GET IT HERE!!!!
this is in fact an april fools joke, but it is also an actual slider you can download and have in your game if you so very wish and i hope you get as much or as little use out of it as your heart desires
disclaimer i do not claim responsibility for any nightmares encountered or passing resemblances to arseholes as a result xoxoxo
Hello everyone, you may have seen my wonderfully useful no face slider april fools post - It's now time for something a bit more... everyday. This is what I was actually making before goofing off there for a bit. It's a full-face slider for well, face size.
It shrinks/increases the size of a sim's facial features (eyes, brows, mouth and nose) as a whole without altering the outer margins of the face where it connects to the neck/scalp, and I'm hoping the images above illustrate this a bit more effectively than I'm currently describing.
Available in both bodyshop and CAS
GET IT HERE
As always, if you spot any issues let me know and I'll try and fix them asap
hello everyone, on the twentieth day of this advent collab I am bringing you the most boring preview picture you will see this December! eleven new custom face sliders!
Here, you will find the following sliders, available in both bodyshop and CAS:
cheekbone width
cheekbone length
jawline squareness
upper lip area width
nose fold rotation (V1 and V2)
nose vertical length
nose tip length
nose bridge shape (V1 and V2)
broken nose
GET 'EM HERE!
Massive thank you to @angelapleasant for getting this whole event together (you've done a fantastic job!) and to all the other creators who have both been and whose days are yet to come :D
preview pictures explaining as to which slider does what under the cut
Slider #1: cheekbone width
Self explanatory really, makes the cheekbones wider (but not deeper, nor taller). A bit like that one maxis slider but without any brow adjustment
Slider #2: cheekbone height
Makes the cheekbones longer or shorter on the y axis
Slider #3: jawline squareness
Affects the back of the jaw, changes the width without changing the chin or cheek width (unlike the maxis equivalents)
Slider #4: Upper lip width
The name's a bit confusing, it doesn't affect the upper lip but the area immediately above the upper lip, below the nose (I did look to see if it had an official name but that search sadly didn't turn up much). It's a little hard to see in the screenshot, but it makes this area wider or narrower.
Slider #5: nose fold rotation V1
This changes the angle of the nasal folds, rotating them up and down (as I've poorly tried to demonstrate in the screenshot). V1 affects a smaller area than V2, not really affecting any polygons around the mouth
Slider #6: nose fold rotation V2
Does the same thing as V1 nose fold rotation, but affects a larger area - this one moves more polys, including some near the mouth (despite the screenshots I swear they're different!). I only intended to make one slider for this, but couldn't decide which to keep so you get both :D
Slider #7: nose length
This slider makes the nose longer and shorter on the face, but in a different way to maxis' slider for the same thing in that the whole nose is stretched, centered in the middle of the nose, not just the nose tip moving up and down. (please ignore the clipping on the brow! the furthest point on the slider was too much for this guy's face but works fine on others)
Slider #8: nose tip length
like the maxis nose length slider, but only affects the tip of the nose
Slider #9: nose bridge shape V1
Makes the top of the nose bridge narrow and the nose tip wide, or the top of the bridge wide and the tip narrow, forming a triangular shape
Slider #10: nose bridge shape V2
Like slider #9, but affects only the nose bridge and not the nose tip, making it taper inwards our outwards from the top.
Slider #11: broken nose
forms a curve on the nose bridge off to the left, or off to the right, a bit like what you might get if your sim broke their nose
---
phew, that's all of them! hopefully these are ones that haven't been done before (I didn't previously have any of these, anyway), and that you might find at least some of these useful :D
As always, if you spot any issues, please let me know and I'll try and fix it asap.
I should've made a nice even number to make the first preview a bit nicer haha
22 patterned recolours of this cute romper mesh by DeeDee!
I need more kid poseboxes. child Jasper and Finn were actively beefing with each other trying to get them to interact at all. so everyone looks extra surly today. :P
Toddler Bed (repo'd to singlebed: included for convenience)
Canopy (see toddler bed)
Toy Box
Table Lamp "Avery Acorn"
Deco "Penny Pendragon"
Deco "Shroomie Buddy Toy"
Crib
Bassinet
Add-ons:
Changing table (repo'd to Floating shelves and Crib) (shelves included for convenience, no need to overwrite if you already have it). It has two slots for deco (or Avery).
Veil for Crib, because I really wanted one. I don't like the canopy that much. (repo'd to crib, not the bassinet, because I'm not keeping that)
tangentwithtanner
izzy806
dailybridgerton
vaporwave
turnnoffyourmind
2087
titsay
gummygunk
