GN Oil Gas Drilling Solids Control

GN Solids Control is a global leader for Oil Gas drilling mud solids control system & waste management system,including shale shakers,desander desilter,decanter centrifuge,vertical cutting dryer,and pumps etc. Email: [email protected]

[gnoilfield]

Meet GN solids control at oil exhibition 2016

If you would like to meet GN solids control at oil exhibition in 2016, welcome to contact [email protected] for the appointment.

For Asia, Middle east and other countries around China, pls visit us at CIPPE 2016 in Beijing, China during March 29~31th. We will show the most advanced solids control equipments and drilling waste management equipments as below:

Cuttings disposal dryer with telescopic skid

Drilling waste decanter centrifuge with telescopic skid

Mining centrifuge

Hi-G dryer shaker

Cuttings solidification unit

Solids control shale shaker

Solids control mud cleaner

Shaker screens

Dewatering unit

We have a 272m2 booth at E2 hall, because our factory is quite closed to the exhibition center, only 50 minuted drive by car, so we take all of our main equipments there to show.

If you are quite busy in March, welcome to visit us at SIPPE 2016 in Shanghai this November.

If China is too far from your countries, like the clents from South America, North America, Middle east, Africa, welcome to visit us at OTC 2016 in Houston, TX at the beginning of May. We have 2 stands there,

GN Booth No. 1: Reliant Center 1652-A GN Booth No. 2: Reliant Arena 9732

Our professional sales engineer will show you the unique technology of our vertical cuttings dryer and VFD decanter centrifuge, and 4 –panel shale shaker.

Due to the low oil price and slow oil industry, some clients cancelled the international oil show visit plan, and will mainly focus on the professional oil show in their own country. You can meet GN at the specific exhibition below:

(1)     In India:

(2)     In Iran

(3)     In Russia

(4)     In Malaysia

(5)     In singapore:

(6)     In Canada

(7)     In Abu Dhabi

If you are convenient to meet us for any of the exhibitions above, pls contact us freely.

[gnoilfield]

More Shale shaker and mud cleaner would shipped to Russia

With more and more co-operation between China government as well as Russia Government, there additionally more and more cooperation between Tiongkok companies and Russia businesses. As China leading companies in China, GN Solids Control LLC have more and much more development in Russia. Right now the world economic environment is not great, industry companies becomes increasingly more difficult under this circumstances. Many companies, even many large and famous companies as well as cannot survive at the poor condition. But GN Solids Control can keep improving as well as developing. With the advanced style equipment, reliable and quick services, and international solutions net, GN Solids Control get more and more marketing discuss from the international market. Lately, 4 sets solids control shale shaker as well as four sets solids control mud cleaner dispatched to the slot for Russia clients. It is far from the first time the clients purchase from GN Solids Control Organization. But GN Solids Control is the first suppliers with this client from China. Before purchase the solids control equipment supply by china manufacturer, the clients only purchase big equipment from America and European.

Why the customer finally decided to buy from GN Solids Control 1) GN Solids Control is Tiongkok leading manufacturer for mud solids control and drilling waste management. 2) GN Solids Control is actually China leading company with regard to drilling waste treatment system. GN engineering group possess good expericent on the drilling waste management field 3) GN Solids Control quick response to clients. The client focused services. 4) Advanced as well as user friendly design on the solids control and drilling waste materials treatment systems. 5) A relatively inexpensive price. GN only high quality products with reasonable cost. Clients will follow GN following the first deal, they will provide repeat orders and suggest new customers to GN Solids Control company. 6) 1 top service and change key solution: from solids control linermotion shale shaker, mud cleaner, desander, desilter, mud mixing system, adjustable pumps, mud agitators, mud guns, mud tanks, electric control systems, decanter centrifuges, vertical cuttings dryer…

[gnoilfield]

Replacement Tandem shale shaker for mud tank

GN solids control provide replacement shale shakers for the mud tank to replace your old shale shakers.

The main essential problem is the floor area to mount the shale shaker. The replacement shale shaker must be with similar dimension and adopt the modification as less as possible, to make the replacement mounting more easily.

The second issue is the weir height and shale shaker feeding hole height, it must meet the original flow line height, and feeding height.

We can make the tamdem shale shaker in the same skid for convenient transportation, and it is easily to disassembly them when they need to be used separately in other projects. To reduce the footprint, we will remove the control panel to one side, when disassembly the tandem shaker, you need to re-install the control panel and connection the cables.

The replacement shale shakers could be customized according to the old mud tank’s color.

We have GNZS594E-HB 4-panel shale shaker with shaker screen size 585x1165mm with composite material frame screen, pre-tensioned. But it is too big for some clients old mud tank, the we will recommend GNZS593E-HB shale shaker with 3 –panels of same dimension shaker screens, the treating capacity and footprint is reduced.

We also have 528gpm treating capacity shale shaker with 3 panels, the screen size is 700x 1250mm, it is an ideal choice for oil &gas drilling solids control system.

We also have GNZS594HGE-LD high G force drying shaker which is mainly used for drilling cuttings treatment for water based drilling mud. It is also with 4-panel screens of 585 x 1165mm.

Our professional engineer team will choose the best models for customized projects according to your required treating capacity and floor area, and we will give you proposal of modification to connect the new shakers to your old mud tank and flow distributor, pls contact with GN solids control if you need new shale shakers to replace your old shakers.

[gnoilfield]

4 unit of shale shaker & 4 units of mud cleaner shipped to Russia

Recently GN solids control shipped 4 units of shale shaker and 4 units of mud cleaner to Russia,  we’ve got a lot of big orders since 2015 for solids control equipments and drilling waste management in Russia. Even though the oil price keep in a low level, and the project is very slow, only the companies who keep improving the technology and provide good quality equipments and service could win the order.

For oil drilling industry, we provide 3 models shale shakers for different applications. 4 panel shale shaker GNZS594E-HB , 3 panel shale shaker GNZS703E-HB and double deck shale shaker GNZS706E-HB ( 6 panels with 3panels on top and 3 panels for bottom). We can provide vibrators with IEC ex certificate, ATEX, DGMS( for India only) and China explosion proof with Italy Oli, Itavibras or Martin brand. GNZS594E shale shaker could be also used as high-G dryer shaker for water based mud drilling cuttings treatment. GNZS706E-HB shale shaker with top screen deck ( scalping deck) and bottom screen deck ( screening deck). All the shaker models could be made as tandem shale shaker or dual tandem shale shaker for convenient move.

Combination with different numbers of desander cone qty and desilter cone qty and the 3 models shale shaker, we could provide different treating capacity mud cleaners, you can choose with only desander cone as desander unit or with both desander & desilter as mud cleaner or only with desilter cone as mud cleaner. Compared with the desander & desilter without bottom shale shaker, the mud cleaner bottom shaker could recycle more useful drilling fluids and separate the drilling cuttings much drier.

We also have linear motion shale shaker and linear motion mud cleaner in stock in Houston warehouse, if you require solids control equipments, pls contact with GN solids control.

[gnoilfield]

Shale shaker operation with the mud tank.

Shale shaker is the filtration machinery widely use in coal cleaning, Oil and gas drilling, HDD drilling to name a few.  It is the first step of filtration of solids control and it removes the large size of cutting in the drilling fluid, often refer as drilling mud.  The drilling fluid are internal lubrication for keep the drill bit in controlled temperature and convey the drilling cutting away in the bored hole.  The drilling fluid often as mixture of different type of chemicals  both in water and oil based mixture and it is costly expenses of drilling operation. For as environment protection and maintains cost of the drilling operation, the drilling fluid losses are minimized by removing them away from the drilled cuttings before the cuttings are disposed of, this is done using a multitude of special machines and mud tanks. Shale shakers are components of drilling equipment that mainly use as solids filteration for the drilling rig.  The drilling mud return the surface front the well  it guided flow to the shale shakers and beginning the filtrations process.  The filtered drilling mud will be flow to the tank and storage it for other solids control machinery to process future more.  The filtered solids away from the mud are deposited in separate holding tank for future treatment or disposal.  Shale shakers are valued by most of the drilling operation to be the very important device in the mud mixing system as the performance of the successive equipment  relates to the pureness of the treated drilling fluid.

GN solids America LLC 's linear motion shale shaker offer in various size to fit the budget of drilling. We have offer two, three and four panel shale shaker  with adjustable angle with one-hand operation that ease the duty of operation.  

[gnoilfield]

Good News from Algeria Waste Management Site

As we all know early 2015, GN Solids Control have made a big deal in Africa, and have sent more than 30 centrifuges to Egypt & Algeria. Do not worry if you do not know, pls check this link: http://www.gnsolidscontrol.com/drilling-fluids/gn-solids-control-a-emec-strategic-partnership-cooperation-celebration

Also since we keep following on the progress of equipment performance on site, now we get more and more good news, as more centrifuges are being used. The client is quite happy with their performance. While we also find a lot of reasons behind this, below is some main reasons.

Professional     Operators

One of our client told us that different operator, have different feedback on exactly same product, at exactly same site, even it is just different shift. Not only this, it make difference on the life of the equipment. For shale shaker, and especially for decanter centrifuges. 

Once visited a site, for the VFD centrifuge operation, different parameters on the bowl speed, differential speed, different inlet, make the result quite different.

Good     Products

Uh, this is also the essence, as even different operation makes differences, it is based on the product, different operation life also based on the material, the manufacturing progress, also the test, commissioning, and so on.

Proper     Site Engineering

Most of the manuals, will require the rig, the mud tanks, the cabins and all the rig site on a proper prepared founded flat basement. There is no way to have a slide one. And for decanter centrifuge it directly effected the performance, and operation life. 

Good     communication

While all the last 3 reasons do not happened independently, it is because of the good communication between service company, client and equipment supplier. Proper training, good commissioning, and always keep in touch.

[gnoilfield]

GN decanter centrifuges work in Algeria with good performance

At the beginning of last year we shipped over 30 units of decanter centrifuges to Africa for drilling fluids cleaning and recycling works, these centrifuges are for EMEC, who is our valuable partner in Africa, and we held cerabration for the completion of the centrifuges in 30days for client’s urgent project. Later our professional engineer fly to their jobsite for first time commissioning and installation service.Now our decanter centrifuges work well in the jobsite and get the end-users high praise.

As one of the major drilling fluids service companies in Egypt, EMEC has known GN for a very long time and they already bought almost 10 units centrifuges from us with different models before the big project, we established good trust mutually during the cooperation, and we always consider our client’s benefit firstly when their is trouble shootings.That is why we still got lots of repeat orders from our client even thought the oil market is slow down everywhere in the world.

The decanter centrifuges working in Algeria is GNLW363CG, which is the C version decanter centrifuge, compared with the previous version A and B, the C version centrifuge with larger treating capacity, better treating result. We change the feeding method from small end to big end so it avoid the centrifuge feed tube block problems and the screw propeller design is improved for better mud distribution. We have got a lot of good feedback from other clients for the better performance of the new centrifuges.

Except for such high speed decanter centrifuge, we also provide low speed decanter centrifuge GNLW452 for barite recovery, and variable speed centrifuge which can be applied for both low gravity mud and high gravity mud by changing the frequency by the VFD control panel.

If you need decanter centrifuge for solids control and dewatering unit, pls contact with GN solids control sales.

[gnoilfield]

Mud mixing system for HDD mud recycling system

GN Solids Control is China leading manufacturer of mud solids control systems, drilling waste management system, as well as high quality replacement shaker screen.

GN Solids Control makes a customized mud mixing system per client’s special requirement. The system was dispatched to the client weeks ago. The barite mixing mud system includes below equipment:

1. Oilfield skid Mud tank. 1 ea

It is a 20ft container size mud tank with two compartments.

Each tank compartment is equipped with a mud gun. Totally 2 ea mud guns for the tank. 2. Mud transfer pump 1 ea. It is a 11kw small centrifugal pump. The pump can transfer the new mixed mud to outside mud tanks or HDD drilling rigs, or mud systems. The mud transfer pump is mounted on the slope of the tank for compact design.

3. 1 ea mud mixing pump and 2 ea mud hoppers.

The mud mixing pump is the same type with discharge pump. They are both centrifugal pump for easy to stock spare parts.

The mud mixing pump and the mud hoppers are combined of a mixing unit.

Client wants the unit able to handle big bag system, they ask for the hanging device for bags. Hoppers are both down at the floor. So GN Solids Control customized a separate oil field skid to mounted all the mixing unit and the hanging device.

The mixing pump for mud hopper is 45kw with 3000-2000 l/min. Normally, it is 1 ea mixing pump is with 1 ea mixing hopper. Why there are 2 mud hoppers but only 1 ea mixing pump?

As the polymers are in big bags, they need to hang the polymers bag on top of the mixing hopper when they want to mix polymers. But they do not want to remove the polymer bag then when want to add other chemicals to the mud mixing system. In this case, they request an extra mud hopper. When they want to add other chemicals, they can close the polymers mixing hopper, and use the backup hopper.

[gnoilfield]

Water recycling system for pipeline engineering

Recently GN solids control get good news from our client CNPC, which is the largest pipeline crossing engineering company in China. They have orders a lot of mud recycling system for their pipeline crossing engineering project with customized design, we provide the best solution according to their project by using different model equipments with different storage capacity.

The mud recycling system they are testing well are with 2 units of double deck shale shaker with desander cone and desilter cone, the reason to use double deck shale shaker is to drying the discharged solids and increase the treating capacity, and treat the drilling fluids better. The compact design to combinate the double deck shale shaker GNZS706E and hydrocyclones is to reduce the mud tank length and save the area and save the cost. The unique design of these 3 units of 500gpm mud recycling system is the container sized mud tank and container sized frame for conveneint shipment.

Except for their domestic project, they also order a lot of mud recycling system for their international projects, this year CNPC expand their business in the world market and get several huge projects, as the main supplier of mud recycling system, GN engineer will also fly to the jobsite for commissioning and installation.  

After several years drilling, more and more fine solids accumulated in the drilling mud, the mud after treated by desander cone and desilter cone is not suitable to be re-used for drilling, we will suggest the client to use middle speed decanter centrifuge to separate the fine solids ( bigger than 5 microns) and less the solids content, GNLW452 decanter centrifuge is the ideal option.

GN mud recycling system applications including: horizontal directional drilling, pipeline engineering crossing, no-dig, piling, TBM, micro tunneling, water welling drilling ,coal bed methane, geothermal and oil & gas drilling.

[gnoilfield]

Replacement shaker screens for sale in India

GN solids control has durable and efficient replacement shaker screens for sale in India, both for onshore drilling rig and offshore drilling rig. Welcome to contact GN solids sales for quotation. We have improved the production technics of shaker screens, the production cost is reduces a lot, and the quality is improved, so we can provide much more effective shaker screens than before. Our shaker screens has been reduced a lot on the price, for detailed price, pls inquiry our sales.

The replacement shaker screens produced by GN solids control can be used for US famous brand shale shaker, due to the oil price dropped down recently, to reduce your drilling cost become more and more important, which can help the driller more competitive in cost and earn more profit. But the high cost of US OEM shaker screens will reduce the little profit to a low level, but most of clients had bad experience  with shaker screens made in China before, they are afraid of the screens made in China.

GN solids control take the quality first, price second as our main principal, we grow very fast since 2008, because we cherish our reputation among our clients and only sell good quality equipments, even though some of clients consider we are not the cheapest price in Chinese solids control manufacturers, we still get many repeat orders because of the good performance, although the price is higher than others. Because the cost-performance ratio is the main concern for international clients, and it is the main reason why our orders did not reduce at such oil price.

We can produce flat and pyramid shaker screens, steel frame pre-tentioned screens and composite material screens,also we can make customerized size screens for your special requirement. We also provide shaker screens for GN solids control own brand shale shakers.

[gnoilfield]

Linear Motion Shale Shaker and Mud Cleaner in India

GN solids control produce linear motion shale shaker and linear motion mud cleaner for oil & gas drilling application, we have exported to over 60 countries in the world, including India, Indonesia, Australia, Europe, USA, Canada, Middle east, South America, etc countries.

Features of GN linear motion shale shaker

1）High G force adjustable, up to 7.5G for GNZS594E-HB shale shaker, G force adjustable up to 8.0G for high G drying shaker GNZS594HGE-LD.

2）Screen panel bottom frame is made of stainless steel which is more ant-crrossive for fluids touch parts with oil based mud and sythentic based drilling fluids.

3）Pre-tensioned screens with 585x1165mm

4）Workable with -20 degree to +55 degree

5）ATEX certified explosion proof with class 1 division 1 ,suitable for 460v~480v/ 60hz, 3phase

6） Suitable for drilling fluids with specific gravity of 0.7~2.6 g/cm3, and viscosity 30~100s.

Features of GN linear motion mud cleaner

1)      Polyurethane material 4inch cones and 10 inch cones , the quantity could be choosed with different treating capacity , we have 3 standard model with 500gpm, 1000gpm, 1500gpm

2)      Weir feeder available which can be used as back up shale shaker

3)      Separately cones and bottom shaker, multi application

Applications of linear motion shale shaker and mud cleaner

1 oil and gas drilling solids control equipments

2 HDD & CBM drilling mud recycling system

3 drilling waste cuttings treatment

4 dredging slurry separation

If you have requirement for linear motion shale shaker, double deck shale shaker, linear motion mud cleaner, pls contact GN solids control. We will show our new designed shale shaker at CIPPE 2016, which will be held in Beijing in March, 2016. We also have shale shakers in stock both in China Beijing facility and Houston warehouse for fast delivery, also for the shaker screens and composite material shaker screens.  

[gnoilfield]

GN solids control was award High-Tech enterprise

Recently GN solids control was awarded China high-Tech enterprise by the association of provincial Science and Technology Dept., Financial Dept. and Tax Bureau. This is not the only approval we’ve got, we have also got API Q1 certificate, ISO 9001:2008, DNV certficate, CE certificate, HSE certificate.

Even though the international oil price dropped down a lot since 2015, we do not reduce a lot orders, and we got more orders from our old clients. GN keep developing and improving our equipments in design and production according to our client’s feedback. Right now we own the most advanced model D generation vertical G cuttings dryer, which has been improved a lot compared with the earliest A version. We own C generation high speed or variable speed decanter centrifuge, which is from A generation before 2013 and B generation in 2014. We are going to have new generation and showed at the biggest oil & gas exhibition in Beijing-CIPPE 2016, welcome to visit GN solids control at our booth , the booth number is E2200.

We own the most advanced technology for vertical cuttings dryer in China during the delelopment in the past 5 years. We are the first manufacturer who showed our verti-G dryer at CIPPE, and make successful test at the same year for water based drilling mud in a site domestic. Then we start to change the design to make it more user friendly, and the next year, hundreds of vertical cuttings dryer are sold to the international market, like Russia, Indonesia, Nigeria, Kuwait and other middle east countries, and get good feedback from our clients. Until now, we have over 100 units of decanter centrifuges working in middle east and Africa, and over 80 units working in America.

If you need to buy advanced technology vertical cuttings dryer and decanter centrifuge produced in China with good performance, reliable after-sales service and reasonable price, pls contact GN solids control.

[gnoilfield]

3 sets Drilling Cutting Waste Management Equipment shipped to Nigeria

Hebei GN Solids Control Co., Ltd is the major manufacturer of solids control equipment and leading maker of drilling waste management equipment in China, getting the first API certified inside China and the first produced vertical cutting dryer with China. Because of its leading part in solids control as well as waste management technology, Hebei GN Solids Control Company., Ltd has exported to 60 countries and entertained the largest portion in the worldwide market, thus achieving a new famous brand GN Solids Control. Certainly, Africa especially Nigeria is a huge market for GN, and now around 100 models decanter centrifuge are within Africa for solids control. Recently, our sales team have become in Nigeria doing cost service for 3 pieces drilling waste management devices on the drilling site.

GN main product line of drilling waste management includes excessive G shaker, vertical cutting dryer and decanter centrifuge. GN high G shaker can reach to utmost 8. 0 G drive because the screen bed consists of stainless steel and the whole patio is heat treated. GN vertical cutting dryer could reach to a 750 R force at a speed involving 1200RPM so as to dry the actual oil based drilling cutting using a oil content at all around 5%. GN decanter centrifuge is to treat the drinks discharge from high Gary the gadget guy shaker or the vertical cutting dryer to make more clean up fluids return back to dynamic system. Beside singe drilling waste management equipment, GN Solids Control also resources complete drilling waste management system with the combination of up and down cutting dryer and decanter centrifuge on a skid attached with little mud tank. GN provides 2 normal model of drilling waste management system for customers’ solution, and also customized drilling waste material management systems are available in GN. 

[gnoilfield]

GN  waste material management centrifuge

Among all typically the solids control equipment, often the shale shaker and the desander or desilter cones usually are of less technology. The coffee quality for the shale shakers often depends on the designed construction, the material choosing and the welding standards, like if there are pockets in the welding seam. Actually , in the first year connected with operation, a well made shale shaker and a poorly produced one are nearly a similar with each other. But when they are applied longer than one year, the issues start to show. In a word, often the shale shakers’ technology is just not so complicated. Comparing with all the shale shaker and mud cleaner (which could be broken down to desander cones in addition to desilter cones), the decanter centrifuge shows a manufacturer’s producing capability to the most. Due to the fact: 1 . there are many rotating elements in the decanter centrifuge, the actual producing accuracy is very important towards the rotating part. And the providing accuracy comes from the enhanced producing machines and specialist operators and workers. GN Solids Control as the solids control and waste material management centrifuge manufacturer, is likewise the first one in this field in order to invite the five deal with producing machine for the centrifuge parts manufacturing in order to assure the accuracy.

2 . often the decanter centrifuge is involving highly speed and the nearly all welcome speed for waste materials management centrifuge is 3200RPM. Although many manufacturers claim that their very own centrifuges could reach broadband up to 3200RPM, but rarely could ensure the noises and vibration during top speed. GN Solids Control’s centrifuges are under precise make sure producing and each one ended up being strictly inspected before shipping and delivery. So GN’s high speed centrifuge is really high speed performance one particular. 3. a suitable length as well as diameter ratio. Normally it really is 3, and 3 is a very suitable ratio for the spend management centrifuges. For the solids control ones for the treatment of the HGS, the middle rate and 2 of span diameter ratio is enough. And in addition how long is the cone element affect the treating performance. Could you consult GN for more information.

[gnoilfield]

Oilfield Cylindrical Vessel type vacuum degasser unit

GN solids control produce oilfield cylindrical vessel type vacuum degasser unit which is used to remove entrapped gas including H2S, CO2 from gas-cut drilling fluids. And protect the centrifugal pump of mud cleaner feeding from gas cut and impeller damage.

Different with the atmospheric Degasser, the atmospheric Degasser is centrifugal type deasser.

Features of GN Cylindrical Vessel type vacuum degasser:

(1)   Self-contained type without jet pump

(2)   new design of Ultrasonic liquid level meter, which is automatically controlled the mud level, when the mud level is too high or too low, it will shut down from the electric control panel to protect the vacuum pump. The Ultrasonic liquid level meter is connected with the control panel.

(3)   22kw prime motor and 7.5kw vacuum pump motor with electric control panel, which is suitable for oilfield operation with temperature up to 55 degree, hazardous environmental explosion & flame proof class 1 division 1, group C & D. If required by the client, we can also provide motor and control panel with ATEX certificate.

(4)   Oilfield skid mounted, smart footprint and conveneint operantion

Models of GN Cylindrical Vessel type vacuum degasser:

GNZCQ270A with treating capacity 1188gpm, GNZCQ360A with 1584gpm treating capacity, the cylindrical vessel diameter are all 920mm.

Working principal of GN Cylindrical Vessel type vacuum degasser unit:

It use the suction effect of the vacuum pump to create negative pressure inside the Cylindrical Vessel, and the mud enter the hollow shaft. And then the mud spray to the tank wall , Gas is discharged to safe zone from gas separator through the suction of vacuum pump and the mud is discharged into the tank.

If you need Cylindrical Vessel type vacuum degasser unit, pls contact with GN solids control. Except for vacuum degasser, GN also provide mud gas separator / poor boy degasser which is used before solids control system.

[gnoilfield]

Replacement shaker screens for oil drilling shale shaker

As the top solids control equipments manufacturer in China, GN solids control also produce drilling waste management equipments, like high speed decanter centrifuge, high G force vertical cuttings dryer and shaker screens. We have our own shaker screen factory to produce replacement shaker screens for world famous brand oil & gas drilling shale shaker.

The shaker screens used for oil drilling is very different from the screens for mining they are produced by orders, we can produce various mesh and API No. for different mud treatment requirement. We usually only have wire mesh and screen frames etc. raw materials in stock, we do not have much shaker screens in stock, because the market’s requirement is changing everyday.

The screens types and dimensions we can produce are as below, it is only part of our screens, we can also produce according to special required dimensions by your sample or measured size.

(1)   Pre-tentioned screens (45.75" x 23") 585x1165mm steel frame screens and composite material frame screens

(2)   49.25" x 25" (1250mm x 635mm) steel frame shaker screen and composite material shaker screens

(3)   42" x 29" (1067mm x 737mm) replacement screens

(4)   Hook screen 41.25" x 27.5" (1048mm x 700mm) , flat type and pyramid type screens

(5)   Steel Frame screen 35" x 27" (890mm x 685mm) , primary screen

(6)   Steel Frame screen 27" x 37" (685mm x 940mm) for scalping deck

(7)   Steel Frame screen 8" X 27" (203mm x 685mm) for dryer panel

The wire mesh screen material for option including SS304, SS316, and the screen layers can be customized. If no special requirement, we will make it according to our own technology and API standard.

GNZS594E-HB shale shaker use the same size screen 585x1165mm, with 4 screen panels. If you need a 4-panel shale shaker with big treating capacity, pls contact GN solids control.

[gnoilfield]

For Larger Prospect and Challenge, GN Is definitely on the Way

Established in the year involving 2007, GN solids control walked through a road rich in thistles and thorns. Nowadays, GN definitely has performed as the leader role on the China manufacturers for solids control equipment. Here we wish to share how GN is expanding in the past 8 years, that proved GN is ready to face larger opportunity in addition to challenge. At the beginning of the foundation connected with GN, this company provided the complete list of equipment for drilling mud recycling. During this period, GN’s equipment are mainly used for olive oil drilling, what GN’s tools do is for primary solids control on the drilling mud which called drilling essential fluids. This type equipment are comprising shale shaker, de-sander, de-silter and horizontal decanter centrifuge as well as some mud mixing equipment like mud agitator, mud gun. Also many types transferring pump tend to be included in GN’s production range.

It is well known that there are drilling to be no process if a corporation cannot develop new technology or even launch new equipment into your market. Focus on the not any dig market, GN created one type compact self-contained mud system especially employed for HDD project drilling mud recycling. This system will be ranged from 200 GPM to 1500 GPM in accordance with the treating capacity and the settings. Australia is a market in which the no dig technology is actually popular accepted and coming from GN’s first unit lightweight system sent to Australia back in of 2011, over thirty units mud system currently send there. GN’s this sort mud system are also traditionally used in Coalbed Methane going projects. By now, GN has realized to provide the complete mud system for both necessary oil gas drilling and trenchless drilling projects. With the distribution of more strict control on drilling waste disposal, a growing number of drilling contractors started to discover some solution to recover far more drilling fluids and generate more less discharges. As a result, there comes a new industry while using name of drilling waste material management. The server on this business could used several drying equipment to recover much more drilling fluids to make the going cutting more dryer intended for easy transportation, and then further more treatment could be done around the cuttings in special service. GN is also one of the suppliers who always kept their eye on the market changing. In accordance with the market request and customer’s feedback, GN launched the fresh equipment of vertical cuttings dryer and high Gary the gadget guy force drying shaker model. After several-generation upgrading, the device are able to be used onsite along with good performance. Later, GN continuously issued the design of typically the skid mounted waste management system which involves the cuttings dryer, waste centrifuge in addition to transferring pump into one skid for easy transportation. The actual requests from the market is generally changing, you never know what the consumer need. By using GN’s squander management system, some shoppers get back to GN with responses ‘can you make the system more smaller footprint, once we don’t have enough space to put the best size skid’. Then GN’s modular design waste management equipment came to this world. The purchaser could get separate equipment via GN, and connect these people onsite only with a number of pipes. This modular style and design brought great convenience to get operator onsite as its configuration is more freely. In order to even more reduce the cost of waste cuttings disposal and give better remedy for the operators, GN made the new equipment solidification device for final disposal on the waste cuttings after dealt with by the waste management tools. After treated by the renforcement unit, the waste cuttings could be discharged directly to get road paving, land producing, even to make the construction content. GN will never fear unhealthy feedback from the customers, since each critics will force GN to a new degree. GN will never satisfy using what have been got as it can certainly make GN mark time. With regard to larger opportunity and concern, GN is already on the way.