Netgear R6080 wifi router DHCP Server Address Pool setup
Netgear routers specifically Netgear 6080 wifi router device is configured in such a way that this router device will assign DHCP server settings to all the computers and other kind of wireless devices that are connected to Netgear 6080 routers. Using routerlogin net login page you can change default DHCP server pool setup settings for Netgear devices.
When you have default DHCP server address pool for Netgear 6080 router devices, your router device will give IP address, subnet mask, default gateway and DNS server IP for computer devices.
Steps to Make Netgear 6080 DHCP Server Pool Settings?
Here are steps you need to follow but make sure that your Netgear device is connected to computer device using Ethernet cable.
1. Using your computer, access routerlogin net login page. Fill http:// routerlogin.net or 192.168.0.1 IP address.
2. Type Netgear login user name and password.
3. Use “admin” for user name and use “Password” for password field.
4. Click on “Advanced” and then click on “Setup” button,
5. After that choose “LAN Setup” button.
6. Using check box you can enable to use your router as DHCP server device. backup computer with ready share vault.
7. After that you need to specify the range of the IP addresses for your device. fill starting IP address for your Netgear device and you can fill 192.168.2.1 IP address as starting IP address.
8. After that fill ending IP address and that is up to you ending IP address you want to use.
9. After that click on “Apply” button.
Once you make all these steps, DHCP server settings are done for Netgear 6080 wifi router devices.
















