Instructions: To get rid of any rough spots, sand the wooden board and wooden dowels. Put wood glue on one end of each wooden dowel and connect them to the board's corners to make a square frame. For a strong bond, let the glue dry for at least two hours. With the spout facing down, put the funnel in the middle of the wooden board. Put the funnel where you want it by putting a few drops of wood glue around the base where it meets the board. Let the glue dry all the way through. Make sure the coffee filter fits tightly inside the funnel before putting it in. Put in two tablespoons of coffee grounds. Bring water to a boil and let it cool for 30 seconds. This will bring it to the right temperature for brewing, which is 195205F 9096C. Slowly pour hot water over the coffee grounds in a circle, beginning in the middle and working your way out. Let the coffee drip into the mug below, pausing every so often to let it bloom. Keep adding water until the coffee is the strength you want it to be. Take out the funnel and throw away the used coffee grounds. Now you can enjoy your pour-over coffee!
