ve

vHC snapsounds

[mcdman]

Three things producers and mixers want to know when deciding to work with an artist

There are generally THREE things that a producer will consider when deciding whether he wants to work with an artist:

Music – Are your songs interesting to the producer?  It’s not a question of whether your music is “good,” because that’s so subjective.  What one guy loves, another might hate.  So it’s really a matter of whether or not a producer happens to personally like your music.

Activity – Are you touring?  Posting videos on YouTube?  Interacting with fans on social media?  Do you have a cool website?  Do you have a manager?  An agent?  A record deal?  All of this is important to a producer.  Why?  Because it shows that the artist has initiative, drive, and ambition.  It suggests that, if the producer spends time making a great record, the artist is likely going to work really hard to make sure the world hears that recording.

Money – How much will it cost?  Unfortunately there’s no easy answer to this, because there are so many variables.  (Check this for a little more info:  http://tinyurl.com/pz5kotj )  But for the sake of this conversation, let’s say that a successful producer would expect a budget of $10,000 per song, and a mixer might expect a budget of $3500 per song.

Generally you need to have at least TWO of these things before a producer or a mixer will get involved.  Some examples:

- Great music / lots of activity / not much money – A lot of producers or mixers would still be willing to get involved.   Even if he doesn’t get paid much, the producer will still get a chance to work on some great music, and with all the activity you’ve got going on, there’s a good chance a lot of other people will hear it.   Maybe you’ll get lucky and your record will explode.

- Great music / little activity / plenty of money – So, you’re just getting the ball rolling, and you don’t have a lot of activity yet.  But you’ve got a decent budget, and some great songs.  You’ll probably find a producer or mixer willing to take a shot with you.   It’s a big leap of faith that you’ll start cranking on the websites and videos and tours and everything else after recording is done.  But if you’re willing to spend a lot of money hiring a producer, then some guys will likely be willing to take that risk.

- Not so great music / lots of activity / plenty of money – Most professional producers or mixers will say no to this… they’d love to be involved, but if they’re not feeling the music, they shouldn’t do it.

Hope this sheds some light.  Feel free to email me for more info: [email protected]

[mcdman]

The problem with "stems"

A lot of times producer or mixers are asked to deliver stems.  Sometimes what people mean is the multi-tracks – the kind you’d get if you were using 24-track tape.  These days, the “multi-tracks” are usually recorded in ProTools.  But often, when people request stems, what they want are effectively sub-mixes:  the drums mixed down to stereo, the guitars mixed down to stereo, etc.   That presents a variety of problems:

1.  For starters, there’s no standard for what “stems” are. Some people just want stereo drums, stereo guitars, bass, stereo BGVs, and lead vocal. Other people want cymbals separate from the drums. Some people want one pass of the kick drum, one pass of the snare, one of the cymbals, etc. Some people want a pass with just Bob’s guitars, and then another pass with just Jim’s guitars. Oh yeah, there’s an accordion on one song, that needs to be separate, too. And by the way, if you need the stems for Guitar Hero, they want completely different stems than Rock Band. One label sent a list of 18 different stems they wanted. They offered to pay, but money alone doesn’t address all the issues (see below).

2.  Making stems is very time consuming. Running all these passes (once you figure out what the heck people want) can take hours. It seems like it should be a simple no‐brainer, but it’s not. It takes time to figure out what needs to be included in any given pass. (Should I include the tambourine in with the drums? Or should that be separate?) It takes time to find and isolate all the things that need to be included and excluded. If it was just a matter of the amount of time spent, we’d ask for an additional fee (though the work is drudgery for mixers and the money is small solace). But that’s not the only issue… read on.

3.  So, you want to send for a remix? You’ve got the multi‐tracks… why can’t you send the re‐mixer the same files you sent the mixer? You might say it’s because there are elements of the mixers mix that you really love… the vocal sound, the drums, etc. So you want to give that to the re‐mixer so he can incorporate that into his remix? So his remix sounds great? And he gets credit for that? Doesn’t that seem like cheating? It certainly seems unfair to the mixers I know. If you need a re‐mixer who can do a great job without being spoon‐fed, I can recommend some people.

4.  You need the stems for the band’s live gigs? Again, you have the multi‐tracks… seems like the band could hire anyone to go in and make exactly the stems they want. So what if it doesn’t sound exactly like the record… who’s going to be able to tell in a club or a concert hall? You’ve hired a mixer to mix your record. Not your show.

[mcdman]

The Trouble with Test Mixes

It’s pretty common for people to ask me if one of my clients will do a test mix. Generally this means that several mixers will be mixing the same song, and the artist will pick the one they like best.  I suppose there’s a certain logic to doing this.  After all, most people wouldn’t dream of buying a car without test driving it, right?  And mixing a record is a big investment, so isn’t it sensible to do test mixes?  

Well, in my experience, there are several inherent problems with test mixes:

1.      For starters, evaluating mixes is so subjective that picking a mixer is often a self-fulfilling prophecy.  If you LOVE a bunch of records mixed by a particular mixer, and you’re EXCITED about working with that mixer, then odds are pretty good that you’ll be happy working with that mixer.  If you’re ambivalent about a mixer, and you’re not sure if he’s the right guy, then odds are you’ll be unsure about his mixes no matter how they sound.  You’ll always wonder what the songs would have sounded like if you had been able to hire your dream mixer.

2.      If you do test mixes with several different people, odds are you’ll love the way the guitars sound in one mix, and the way the drums sound in another mix.  At the end of the day, you’ll find yourself chasing elements of different mixes which may be impossible to have in one mix.

3.      Mixing should be a collaborative effort.  This point (and others) are made eloquently in this note from one of my clients to an A&R guy:   “Regarding the test mix, I really do thank you for considering me, but I have issues doing these kind of shootouts for many reasons:

“First—no great records were ever made like this. I always cite Led Zeppelin and Jimmy Page as an influence in my thinking.  Jimmy used different guys on every record—sometimes just the house guys at certain studios and sometimes the old trusted dudes – but in the end it still sounded the way he wanted.  As producer, he worked with the engineers and mixers to help them achieve that Zep sound that we all love and that was in his head.  At the same time left behind a body of work that doesn’t sound redundant from record to record.  The band grew with each outing and I firmly believe it’s because great records are made with communication and people working together.

“It takes a little time to get into the swing of a record, and I welcome the communication between myself and a band…getting to learn what they like and dislike.  A shootout is so impersonal – it’s just guessing what people may like and being afraid to steer too far off the path since they may not like it.  

“Second—no matter how many times someone says they won’t just like the loudest mix, they always pick the loudest one.  Its human nature—louder is better.  I don’t like blasting things into oblivion so it immediately impresses the band, but instead I try to mix with music decisions in mind. I let the mastering guy make the volume competitive and not just more blown up and distorted.

“Anyway, I do thank you for the opportunity to be involved.  But I like to work WITH a band to make great records…not just be forced into going for flash and volume off the bat to hopefully get the gig.”

Our recommendation is this:  

1.      Do your homework and pick a mixer who has done work that you truly admire.

2.      Talk to that mixer about how you want your record to sound, and get the mixer’s input.

3.      Trust your gut… if it feels like the right decision, commit yourself to making it work with that mixer.

4.      Believe in yourself and your music.  As important as it is to get a great mix, it is still a tiny fraction of what makes your music connect with an audience – words, melody, performance – all of these things carry much more weight. Don’t lose sight of the big picture!

To revisit the analogy about test driving a car, here’s a final point: we don’t want to sell you a car you don’t like!   We only want to work with you if you really want to work with the mixer, and are committed to making it work.  At the end of the day, any reputable mixer wants the same thing as the artist:  he wants you to be wildly happy with the mixes, to be incredibly successful in your career, and to work with you again on your future recordings.

Thanks for reading.

[tomasvexxx]

Put overheads up at unity gain, panned center    Flip the polarity (by pressing the phase button on your mic pre or using a plug in) on one side, it should sound better when the polarity IS NOT flipped, it should retain more low end    Keep everything panned center and bring up the snare, flip the polarity and make sure it sounds better when the polarity IS NOT flipped, pull fader down to 0 after    Bring up the kick drum, flip the polarity, does it sound better?, if so then leave it flipped, if not then flip it back, now pull fader down to 0    Bring up the toms, flip the polarity on the toms, does it sound better?, if so then leave it flipped, if not then flip it back, now pull fader down to 0    Mute out overheads, bring up kick and snare, flip polarity on one, it should sound better when the polarity IS NOT flipped    Keep doing this until you find the correct configuration where everything is working together

[ https://audiohertz.com/2017/07/03/how-to-properly-check-the-phase-when-recording-drums/2/ ]

[tomasvexxx]

Use Saturation on Snare.  – Adding a little saturation to a snare drum close mic can bring out the sustain of the drum and at the same time make the hits a more consistent.  The end result is that the drum will feel louder, but the peak levels will remain the same!        Saturate the Bass Guitar – When you record both the bass guitar amp and the DI track.  Low pass the DI and hi pass the amp.  Then add some subtle saturation all or go crazy and add a lot of distortion.  Adding the distortion might bring out a little hum from the amp’s track, so you might have to add a gate.  You can see this in the video example.  This is a great trick for adding some high end energy that will help the bass guitar cut through the mix    Saturate the Guitar DI – If you recorded the electric guitar and tracked a DI for reamping you can also also use the DI track as something you can create an effect with.  Saturate the DI and go really crazy with it.  Then add some reverb.  You can then blend this in with the guitar amp sound that you recorded to create a new guitar sound!    Use saturation on Piano – A acoustic piano can have a really sharp transient.  Adding some saturation to the piano can help you to smoothen out the transients which and add consistency.  Now your piano will sound fuller and sit better in the mix.    Saturate to remove harshness – Last but not least, you can use saturation on a drum overheads or room mics to remove cymbal harshness. Just the smallest amount of saturation will roll off the high end and tame those bright splashy cymbals, but the top end of your snare drum in the mix will still be bright and crisp.

[ via https://www.producelikeapro.com/5-saturation-mixing-tricks/]

[tomasvexxx]

If the feedback is a “hoot” or “howl,” try cutting in the 250 to 500 Hz range. A “singing” tone may be around 1 kHz. “Whistles” and “screeches” tend to be above 2 kHz. Very rarely does feedback occur below 80 Hz or above 8 kHz. It takes practice to develop an ear for equalizing a sound system, so be patient.

[src: https://www.prosoundweb.com/channels/church/church_sound_feedback_facts-_and_fiction/]

[tomasvexxx]

3 Critical Compressor Tweaks You Might Be Overlooking - Bobby Owsinski's Music Production Blog

Using a compressor in default mode might sound okay, but incorporating these 3 compressor tweaks with take its sound to the next level.

Of all the compression parameters, this is the one that gets overlooked the most. It’s use is actually pretty easy. If you want more punch from the track, set the Ratio control low. If you want more control, set it higher. In other words, if you want to maintain the snap of a kick or snare yet add some punch, set it at 2:1 (or even 1.5:1) so some of the transients get through. If you want to make sure that the signal more or less stays at one level, set the ratio higher, like 4:1. Some engineers love a solid bass that doesn’t dynamically move, so they’ll set the ratio at 8:1 or more (10:1 and higher is considered limiting), for instance. Once again, set the Ratio low for punch; higher for control.

[tomasvexxx]

[tomasvexxx]

The most common frustration of mixers of all skill levels is creating separation and an open sound in their mixes. The frustration primarily stems from a lack of understanding what creates depth an…

EQ is the most powerful tool for setting the Up-Down aspect of the 3D sound field. High frequencies will pull sounds up in the speakers. Hi Mids move the sound toward you. Low mids sink signals back in the speakers and Low frequencies want to pull downward.

[tomasvexxx]

These 4 small steps before you begin to record can lead to a surprisingly big drum sound.

As a general starting point before you even begin any complex drum miking, it’s important that you get a good picture of what the drum kit sounds like. Go out into the room with the drums and have the drummer play the song that you’re about to record. Note the tone of the drums. Place a single mic 8 to 10 feet in front of the kit at about the same height as the drummer’s head. A large-diaphragm condenser will work nicely for this. Record the kit for a minute or two. Listen to the playback. Is the set balanced, or do one or two drums or cymbals stand out?This will give you an idea of what the drum kit sounds like and what the issues may be when you begin recording, which now allows you to compensate by drum tuning, mic selection, or placement.

[tomasvexxx]

Learn Grammy-Winning Miking Techniques from Vance Powell | Universal Audio

I’ll often stack cymbals on top of each other so that the sounds are short and smashy, and much more percussive than your typical long-decay cymbal sound.

[tomasvexxx]

4 Quick Drum Tuning Tips From The Famous "Drum Doctor" - Bobby Owsinski's Music Production Blog

Ross Garfield is the famous Drum Doctor and he has 4 quick drum tuning tips that every drummer, engineer and producer should know.

If the snares buzz when the toms are hit:

Check that the snares are straight

Check to see whether the snares are flat and centered on the drum

Loosen the bottom head

Retune the offending toms

Use an alternate snare drum

If the snare has too much ring:

Tune the heads lower

Use a heavier head, such as a coated Remo Emperor

Use a full or partial muffling ring, or add some tape or Moongel

If the kick drum isn’t punchy and lacks power in the context of the music:

Try increasing and decreasing the amount of muffling in the drum, a sandbag, or try a different blanket or pillow

Change to a heavier, uncoated head, such as a clear Emperor or Powerstroke

Change to a thinner front head or one with a larger cutout

If one or more of the toms are difficult to tune or have an unwanted “growl”:

Check the top heads for dents and replace as necessary.

Check the evenness of tension all around on the top and bottom heads.

Tighten the bottom head.

[tomasvexxx]

Platinum Trick #1: Compress everything that seems out of control, but just a little. Stack compressors with very little Gain reduction on each of them when needed. Keep compression as transparent as possible, but control well every peak. Use relatively long attack time (dynamically alive), and super short release time (transparency). This generally gives the punchiest, yet well controlled dynamic you hear on high end loud and punchy records.

Compression in-depth: The beginning | Quantum Music Mastering

[tomasvexxx]

Strategies to stop treble from hurting.

An overly hard high-end can often be the first barrier to an enveloping sound.

If you find that a certain sound in a track is 'hurting' a solid strategy is to:

Apply an EQ to the offending sound

Choose a narrow-ish Q of about 1

Make a large cut of about 6–9dB (this will sound unnatural)

Sweep around the 3—7kHz region, finding the frequency point that sounds smoothest

Reduce the cut so that things start to sound natural again, finding the optimum cut amount

Bypass/unbypass a few times to see if you've fixed the issue

This might be old news to you, but a trick that I usually like to do after this is:

At the same frequency apply another band of EQ simultaneously

This time choosing a wide Q of about 0.3

Make a small boost, about a quarter to a half the size of the cut

This boosts the surrounding frequencies a touch, now when you bypass/unbypass these two EQs the sounds before/after match more evenly; it's easier to compare. To the ear it sounds like you're effectively 'spreading' the hurting frequency into the surrounding frequencies, which can really smooth things out and give more space and size.

[atomiumamps]

What's your take on active pickups? Given your tendencies toward audio fidelity I've been surprised to see only passive pickups mentioned here. Most comments regarding them don't fit in with my limited experience of using an 18v EMG 81/85 set; I've never found them "too compressed" or that they "make every guitar sound the same", so I'm curious where those opinions come from.

My only experience with actives was having the EMG 81/85 set in my old ‘87 Les Paul from 2001-2006. I basically used them because the output was so high and the noise was so low, and not for their ‘tone’ (such as it was). It’s important to remember that actives are basically very weak passives with a preamp attached, and that preamp can be voiced or EQed in whatever way a designer wants. So there’s not much point generalizing about the sound of actives as a category, except to the extent that they all seek to maximize signal-to-noise ratio.

I think most people hate on actives based on the EMG 81/85, which are a very old design. They’re pretty neutral sounding, and probably have a reputation for ‘compression’ because the output is high enough that they’re getting a wall of fuzz out of amps that are dialed in for lower-output passives. EMG’s original design goals weren’t to create a ‘toneful’ pickup; rather, they wanted to create a more IDEAL pickup. So they addressed the intrinsic tradeoffs of a passive design – loss of highs with increasing output, magnetic string pull, noise, and microphonics. They built a passive pickup with reasonably neutral characteristics and excellent noise rejection, then stuck an opamp inside it and potted the whole thing in epoxy – bam, huge reduction in microphonics and noise, with an output level as high as they felt like. So the original selling point was simply: more distortion, more articulation, less noise. This was way before the craze for vintage instruments. Because the fundamental strengths of active design are most necessary and useful for high-gain players, active pickups have become associated with metal. Which in turn reduces interest in them from other kinds of players, and reduces the incentive to design an active geared for other playing styles. Thus the prevailing notion that actives are one-trick ponies.

(As a side note: reducing microphonics DOES reduce the guitar body’s contribution to the sound. Why? Because only the strings are picked up electromagnetically, the pickup ‘hears’ the body when it acts like a microphone… and ALL pickups, even potted ones, are microphonic to some extent.)

I switched back to passives from the EMGs mostly because I just liked the sound of certain passives, and didn’t need the EMGs’ output level or neutrality. I think that I (and many other musicians) often find emergent sounds in the unintentional imperfections of musical equipment. For example, I now rely on the insane squeal of an unpotted humbucker. If it’s potted, it’ll just go ‘woooooooooo’ instead of going ‘EEEEEERKSTKSRRKKRREEEEEE’ like I want.

[tomasvexxx]

I push the fader up as fast as I can ramping into the downbeat. Then immediately start fading it back down as to emulate the decay of a crash cymbal. The fader is back to its normal position after about 1/2 a bar for slow tempos, maybe a full bar on faster tempos.

https://www.gearslutz.com/board/6939045-post24.html

[tomasvexxx]

Achieving a great vocal sound | pureMix.net

Here are a few questions that the Sonnox team asked Fab about producing a great vocal sound.

I use the Warmth function on the Dynamics plug-in. Sometimes the track is just right, but the vocal is lacking a little bit of edge and excitement. In those cases, I find that sprinkling some 'Warmth' on there will give me the edge that's not volume-based, but excitement-based. It works every time.

I'll also turn to the Oxford EQ, because it's my 'go-to' clean EQ. I use it to hi-pass and remove room resonance. I then run it into the Dynamics with the Warmth feature, sometimes also using the Limiter section.

If there are forensics to be done from there, I will use the SuprEsser as a de-esser, or as a honk remover if the vocal was not properly recorded – which is a scaringly high percentage of the time. It lets me remove the problem I need to focus on. It also lets me keep the vocal fat, even if it's recorded in a boomy room. I don't have to EQ all the problematic frequencies all the time, I just use the SuprEsser to remove a problem dynamically, only when it is a problem - which is miraculous!

If I need even more edge in the vocal after that, I will use the Inflator. By carefully adjusting the Effect and Curve functions, I can get mellow but not dull, or bright but not aggressive.