Cosplay Resources

Please use the Search Bar, or the #Tags page to find what you are looking for. If you don't see it, please make a submission or ask!

[cowbuttcrunchies]

In this tutorial we’ll be creating a crown primarily using Black Worbla and transpART, inspired by My Little Pony’s Princess Celestia!  This sun-themed headpiece involves several components and has been broken into several parts for easy reading: 1) the base crown and sculpture motifs 2) the sun “halo, 3) painting and priming, 4) semi-transparent sunbursts, and finally 5) the horn.  Keep reading to create your own version!

Keep reading

[cosplaytutorial]

Smocking Tutorials With Instructions – Preparing for Smocking

Tutorial Link: http://indianparentsforum.com/home/canadian-smocking-tutorials-with-step-by-step-instructions/

[misslaneyluck]

I made my own SUPER CRAPPY dimmable/ color changing ring light for under $30. The goal of this project was to keep it as cheap as possible while still being functional for the single day we need it.

I found a tutorial that used an extra wide wooden wreath base, but I could not find them anywhere. I found the normal width ones, but they were only 12″ diameter and I wanted to go larger. I decided to use foam board because it’s cheap and the ring light isn’t getting moved around. If you have the tools available to you, wood wouldn’t be a bad idea.

Materials Needed: 18″ Quilt Hoop: $9.25 w/ coupon 2x Foam Board: Had ($4.50 w/ coupon) LED Kit: $14.50 E6000 Glue, Super Glue - Had (~$3.50 each) Primer + Silver Spray Paint + Shellac- Had (~$15 total) Hotshoe mount/ adapter or Tripod mount, depending on how you want to mount the light. I’m using a spare for my Tripod

Tools Used: X-Acto Knife Scissors Cutting Mat Flexible Measuring Tape Pen/ Sharpie

First off, you can tell even in the product photo I linked above that the quilt hoop isn’t perfectly round. If you’re using a wood base you’ll probably need wood clamps to hold the ring to it in order to keep it steady while your glue dries.

First step is to trace the inside of the hoop and cut out the circles on your 2 pieces of foam board. Make sure you make a mark so you can line them up later, since it’s not a perfect circle. You can see in my photo I traced the outside and then had to fix it, don’t be me.

Next I used E6000 to glue the 2 pieces together and let them dry for 2 weeks while I did other things for at least 20 minutes, you don’t want them to slide around. Make sure you only glue near the outside, we don’t want to cut through glue later.

Next I opened up the hoop (see photo below) and used E6000 on the inside and outside to secure it open. I smoothed the glue out with a plastic knife so it’ll look better painted. While that is drying, find the center of your ‘circle’ as best as you can. Pin your measuring tape there and measure so that you have a perfect circle 6″ from the center. That will leave us with a 3″ ring area.

It doesn’t look perfectly round in that photo but I promise you that it is. Now we’re going to cut it out. Score your circle carefully with the X-Acto knife and then keep cutting until you get through each/both layer. In later images you can see that I attempted to smooth the inside with hot glue - don’t do this, it looks awful.

Now, I put my foam board rings into the hoop and used hot glue to secure it on the front & back and fill in any gaps

Yay! It looks like a thing! Now for painting. You can just use the silver paint if you want, but I’m using multiple colors because I had them. Primer + Shellac is going to give you the best reflective finish spray paint could give you. You can also lightly sand in-between each coat (this is required if you made the back part of the ring out of wood).

Primed! I did about 3 coats over the entire thing- front, back and sides. I let it dry for about 15-30 minutes in between each coat, but this primer dries fast. Next I sprayed just the center ring with the metallic silver. Make sure you spray the paint somewhere else first because this kind can be pretty watery, even if you shake it up. After spraying 3 times and letting it dry completely over night, I Shellac’ed the metallic area 3 times. I overdid the shellac and you can see spots of it, but it doesn’t really matter as long as it’s shiny.

Make sure you test your LEDs before you start gluing! I used gel super glue because it dries much faster than E6000 for the LEDs. I just put drops and held the LEDs down, starting from the top and ending with the inside. Because the last layer is on the flat part of the ring, I had to kind of force the LED tape to turn.

Mounting is a bit of a challenge because the bottom is so flimsy, so here are 2 ways. Tripod: Reinforce the area where the hoop closes with E6000. When that dries, saw off the wood block right above the screw. Attach your Tripod base with glue or by screwing 2-4 screws through it & to the wood chunk. I also think a permanent mount on the back of the ring would work very nicely and be sturdy. Hotshoe: If you want the ring to go around the camera, you will need to add a little wood block to the inside of the ring so it can sit on the hotshoe mount like this: 

(Photo from here, my inspiration for this tutorial)

I drilled a single hole into the base and screwed the tripod mount in, but because it’s so weak it needs to be reinforced or fixed. My temp solution was duct tape so I could take photos.

Boom. It’s ugly but it works! The remote has a ton of options.

There you have it! Cheap and simple ring light. Perfect for cosplayers and crafty people who have a lot of this crap lying around :)

[cosplayresources]

I was trying to look at the material resources but the webpage was removed. I'm kinda new to cosplay and really needed places to buy fabric

viviandanng: Thanks, I'll have to find a replacement. Depending on what you're looking for, you should have luck with these sites:

https://www.fabric.com/

https://www.onlinefabricstore.net/

http://www.moodfabrics.com/

http://www.fabricdepot.com/

http://www.fabricdepot.com/

http://bandjfabrics.com/

http://nyfashioncenterfabrics.com/

https://www.silkbaron.com/

[celebrationgeneration]

Here’s the first part of my “How I Made That” series on my dwarf wig (For my upcoming Dis costume) This discusses how I made a ton of wefts quickly and easily, using silicone caulking and braid hair. http://www.celebrationgeneration.com/blog/2015/01/26/how-i-made-that-dwarf-wig-part-1-making-wefts/

[cosplayconnect-deactivated20220]

Hey everyone, welcome to our shiny new blog! The posts are going to be kind of slow until Katsucon in February, which is my first con of the year.

I go by MissLaneyLuck, and you can find all posts by me in our tags page! If you want to follow me outside of Cosplay Connection, my cosplay blog is misslaneyluck <3

I’m super passionate about cosplay, and I’ve been cosplaying and attending conventions since 2007. I started writing convention reports a couple of years ago, but the website has since closed down and they are lost to the depths. @TiniestMonster and I have taken over the name, and are re-branding Cosplay Connection as a review and photography blog :)

I’m very passionate about sewing, and I love to make cosplays with lots of ruffles! I’m painfully addicted to Supernatural, and I really like taking selfies with fellow con-goers. I’m pretty much a gigantic nerd, and I’m really excited to get this blog going.

[cosplayresources]

Hey everyone, I’m sure you’ve noticed that I don’t post much on this blog anymore. Properly tagging everything and answering all the asks became a huge stress, and I decided to take a break. Me and one of my closest friends have decided to put our energy into running a con review & cosplay photography blog, please follow us!

[cosplaytutorial]

How to Enlarge a Pattern by SewStylish Magazine, View the full tutorial here: http://www.threadsmagazine.com/item/25087/how-to-enlarge-a-pattern

[notbadcosplay]

[cosplayresources]

You'd like to make your own skirt, bolero or corset? You want to cosplay Elizabeth from Bioshock Infinite? Well, I think I can help you with my tutorials and dokucmentary on a selfmade Booker DeWitt and ELizabeth cosplay!

For more cosplay and crafting related things check out and like  Kion Cosplay -------------------------- Kion Cosplay / Myself as Elizabeth Comstock (Bioshock Infinite)

Photo taken by Christoph Naue aka Derps Hobby Made

[cosplayresources]

I have to do a cosplay in October which requires body paint on my face, neck, arms, back, and stomach. A friend will be helping me and I'm using PAX paint, but because it's so sticky I can't really paint it all in one go. The meet up is really early, and I still need to put clothes on above it. How would I go about this process?

theinfamousz: Makeup should always be set with powder, I don't believe PAX sells setting powder, but you can always use the Ben Nye translucent powder, or Makeup Forever HD Finishing Powder

[cosplayresources]

Step by step photos from making a Worbla breastplate on steampunkmonster.com

[cosplayresources]

Makeup tutorial modeled after my Awoken Warlock character from Destiny.

http://youtu.be/KXuHlkY3x14

[projectcosplay]

As a follow up to our Making Worbla Smooth Experiment, here is the detailed write-up regarding the methods used in that experiment.

Making Worbla Smooth

There are many methods for making Worbla smooth so I decided to do a test run myself based on the primary methods others have used. The three main ways of covering Worbla have been using Gesso, Plasti-Dip, or Wood Glue. This experiment only covers Gesso with Mod Podge acrylic sealer or Gesso with Plasti-dip. I didn’t have Wood Glue available during the time of conducting the test so there will be another part to this series that will include a comparison using Wood Glue.

Method

I used 8 layers of Golden Sandable Hard Gesso and 150 Grit Sandpaper. I prefer this Gesso over any clear Gesso as you can actually see the streaks so that when you sand it, you can see the Worbla getting smoother (pictures 3 & 4).  In addition, the sandable Gesso has additives that makes it thicker so that you don’t have to do as many layers or as much sanding to make it look good. Yay for that!

You’ll notice I didn’t do a good enough job of sanding so you can still see some streaks in the forth image. If I were to do this again, I would do 6 layers, sand with 150 grit, and then add another 4 layers, then sand again with 150 grit to get a smoother finish (instead of just 8 layers straight). I tried sanding only 4 layers in and unfortunately, I exposed the Worbla, so 6 layers of Gesso is the very minimum in guarding against Worbla exposure. Also, it’s very important that each layer of Gesso dries completely before you put on the next. Otherwise, if you start sanding, the Gesso will chip and take, along with it, all the layers underneath. In picture 4, you will notice this happened on the edges of the Gesso which is why the Worbla is exposed there.

Results

Picture one (left) shows the top piece which is Worbla painted without any additional work. The bottom piece is 8 layers of Gesso, sandpaper, one layer of Mod Podge acrylic sealant, and then one layer of Gold Metallic Paint.

Picture two (right) shows the top piece which is Worbla painted without any additional work. The bottom piece shows Worbla with 8 layers of Gesso, sandpaper, 2 layers of Plasti-Dip, and one layer of Gold Metallic Paint (Rustoleum brand).

Conclusion: I was surprised that the piece with the Mod Podge sealant looks smoother than the one with the Plasti-dip! I think the Plasti-dip made the items look more foam-like than I anticipated. It seems as though the Plasti-dip reacts oddly to Worbla.

Stay tuned when I try this experiment with Wood Glue.

[cosplayresources]

Defiance: Stahma Tarr (Castithan) Makeup Tutorial

 https://www.youtube.com/watch?v=wvxv2XHzNKI&feature=youtu.be

[gameofreferences]

[cosplayresources]

gameofreferences:

Michele Carragher, the head embroider on Game of Thrones, made this awesome tutorial to show how she created the dragonscale fabric that appears on several of Daenarys’ costumes in S3 and S4.

Ms. Carragher says that the dragonscale fabric was created because “In season 3 the Costume Designer Michele Clapton wanted a Dragonscale like textured embroidery that starts to emerge on three of Daenery’s costumes, which becomes heavier and more pronounced, growing and evolving as the season progresses” (Carragher).

In stages 9-11 of the tutorial we see how the textile evolves from lightly to heavily embellished. This progression is meant to illustrate Daenarys’ personal growth and the growth of her dragons (source).

Here’s a link to Ms. Carragher’s website.

[blackbanshee-deactivated2018022]

WORBLA IS BEING SOLD IN THE U.S.

no more $20 shipping!! there are STORES yes STORES where you can buy official worbla now!!

see for yourself!

Atlanta, GA

Metairie, LA

Omaha, NE

Austin, TX

Conroe, TX

Jacksonville, FL

Burbank, CA

Canada too!

Winnipeg, MB

Toronto, ON

Nanaimo, BC

Calgary, AB

thank you cosplaysupplies!

[cosplayresources]

Tutorial showing you how to style a wig for a Sally Jupiter AKA Silk Spectre cosplay.  This classic pinup hairstyle features Bettie Bangs and Victory Rolls.