Best Roll Calander Manufacturer

[slachydratecs]

Best Roll Calander Manufacturer

Calender mainly consists of roller, roller bearings rack, nip adjustment device, transmission system lubrication system, roll temperature adjustment device, security and control systems and other components.

Types of Roll Calender Available

•   THREE ROLL CALENDER

•   FOUR ROLL CALENDER

•   FIVE ROLL CALENDER

•   ALL MODELS AVAILABLE IN

    1) UNIDRIVE

    2)BULL GEAR DRIVE

[slachydratecs]

Rubber Processing Machinery Manufacturer

QUALITY ASSURANCE-Slach Hydratecs is committed to provide premium quality machines and plants. For this, the company has appointed a special work force to ensure effective quality control in all aspects of the business. The shop floor is equipped with modern testing equipment to provide accurate, best quality and valuable machines such as rubber and ploymer processing machines, rubber mills, rubber grinder mills, dispersion kneaders, rubber bale cutters, rubber cracker mills, rubber mixing mills and many more. All the products are in accordance with international standards for quality and safety.

[slachydratecs]

Best Roll Calander Manufacturer

Calender mainly consist of roller, roller bearings rack, nip adjustment device, transmission system lubrication system, roll temperature adjustment device, security and control systems and other components.

(1)     The roller is     hollow type, by steam heating or water cooling, the material is chilled     allow cast iron, has high hardness and high abrasion resistance of the     working surface after the grinding.

(2)     Transmission system is speed reducer and ratio grear driven by the     motor so roller pairs relative to the direction of rotation. The motor is     inverter motor the speed of roller is stepless variable which can timely     reflect the speed of the roller on the control cabinet.

(3)     Nip adjustment device: lower rollers at both ends each have a set of     controllable nip adjustment device and under the control of this device,     the roller may be moving in the spout to achieve the purpose of adjusting     distance. Each set of nip adjustment device by the reducer through a worm     pay deceleration; the transmission screw rotate the nut which fixed on the     rack thereby driven roller moving.

(4)     Roll temperature adjustment device: at one end of the machine     equipped pipe valve with a thermostat device, open the valve, water or     steam via the rotary joint into the roller, the roller is cooled or heated,     through the heat exchange of the exhaust gas or vapor administered below     the nozzle discharge. If more strict control of temperature, it can plus a     thermostat heat exchanger.

(5)     Lubrication system: roller bearings is forced thin oil circulating     lubrication, fuel tank filled with lubricating oil and equipped with a     spiral cooling tube in order to reduce the oil temperature and ensure the     good lubrication of the bearings. The oil pressure is generally adjusted     in 0.1- 0.2MPa and adjust the pressure through the regulator, the     lubrication system set of two filters, unscrew the top cover and take out     the filter and clean with kerosene to maintain a smooth flow of clean oil     line; ratio gear lubrication is also the oil pump to the oil circulation     lubrication; reducer using thin oil nationality gear lubrication oil level     should be maintained within the oil gauge scale shown; reducer of the nip     adjustment device, when installed in the machine or repair after the first     use, should be screwed open box cover at the top of the plug, inject a     certain amount of lubricating oil; worm gear box grease plug injected from     a tank shell, remove the scale on the top cover, from screw end oil cup     inject grease for lubrication screw.

TYPES OF CALANDER

THREE     ROLL CALENDER

FOUR ROLL     CALENDER

FIVE     ROLL CALENDER

ALL     MODELS AVAILABLE IN

1)     UNIDRIVE

2)BULL     GEAR DRIVE