How to make a pumpkin head
Since I defs didnāt want to carve a real pumpkin to put on my head and get nasts pumpkin insides all over my hair I decided to paper mache one. Unfortunately there was no good tutorials anywhere so I will share my trial and error knowledge.
First I got some supplies: 1 Punch balloon (theyāre rounder and larger they regular balloons), some paper mache stuff in a bag, cardboard, a glue gun, paint, sculpey clay, tape, some news paper and some water and flour mixed together.
I then put at least three - five paper mache layers of newspaper with flour water on the balloon. I also measured my head and left an opening at the bottom. (NOTE: Donāt put tape on the balloon and try to peel it off after youāre done paper macheing, RIP)
After thatās all dry I put glue gunned some cardboard onto it to give it some pumpkin like ridges.
Then IĀ filled the gaps between the cardboard and the newspaper with the paper mache in a bag stuff. Wait for it to dry. (Note: Donāt pop balloon until the paper mache in a bag stuff is dry cause it holds a LOT of water and your paper mache project will sink,Ā RIP)Ā After that I popped the balloon and lightly dampened the top with a sponge and water until it was wet enough toĀ slowly press down into more of a pumpkin shape.
After itās all dry I taped a stem I made out of card board on the top and put another layer or two of newspaper mache over top.
More drying wait time (you can use your oven on the lowest setting to make it dry faster) then I sanded it down and cut out a face with an exacto blade.
I added a little bit of backing behind the face on the inside with the paper mache in a bag to give it more of a 3D look which wasnāt that noticeable but oh well, it kidna workedā¦ After all that stuffs done I painted it all white otherwise the newsprint would bleed through and make my colours not as bright, I also added some sculpey clay to the brow area to give it some more emotion in which I used an iron to dry it with cause it was too late to put it in the oven with paint all over it (Note: Put clay on before painting).
I sprayed it with a sealer before painting colours on it cause I find acrylics do weird things sometimes. After it was all dry I begin to paint.
I also painted the inside a red and added a kinda head rest thing on the inside since when I pushed the top down it made an uncomfortable point at the top when putting it on your head. Then once it was all dry I sprayed it with some more sealer, added some cool stuff like stitches with some ribbon and blood which I used nail polish for a shiny effect and put in some lights which werenāt very effective when my head was in the pumpkin but thatās okay, it still looked cool.
Hope this helps some people, Enjoy!
pixelskylines
vaporwave
discoholicmusic
titsay
